mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/stmhal/boards/PYBV4/mpconfigboard.h

62 lines
2.2 KiB
C
Raw Normal View History

stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
#define PYBV4
#define MICROPY_HW_BOARD_NAME "PYBv4"
Change MCU name config micro
2014-06-26 23:35:53 +01:00
#define MICROPY_HW_MCU_NAME "STM32F405RG"
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (1)
#define MICROPY_HW_HAS_MMA7660 (1)
#define MICROPY_HW_HAS_LIS3DSH (0)
#define MICROPY_HW_HAS_LCD (1)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_HW_ENABLE_TIMER (1)
#define MICROPY_HW_ENABLE_SERVO (1)
#define MICROPY_HW_ENABLE_DAC (1)
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
#define MICROPY_HW_ENABLE_SPI1 (1)
stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com.
2015-01-16 05:45:21 +00:00
#define MICROPY_HW_ENABLE_SPI2 (1)
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
#define MICROPY_HW_ENABLE_SPI3 (0)
stmhal: Add config option to disable/enable CAN driver.
2014-10-05 18:05:26 +01:00
#define MICROPY_HW_ENABLE_CAN (1)
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
stmhal: Make HSE PLL parameters configurable per board.
2015-04-18 15:30:04 +01:00
// HSE is 8MHz
#define MICROPY_HW_CLK_PLLM (8)
#define MICROPY_HW_CLK_PLLN (336)
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2)
#define MICROPY_HW_CLK_PLLQ (7)
stmhal: Add config option to use LSE/LSI for RTC. Most boards (except the pyboard) don't have a 32kHz crystal so they should use the LSI for the RTC.
2015-03-16 22:54:44 +00:00
// The pyboard has a 32kHz crystal for the RTC
#define MICROPY_HW_RTC_USE_LSE (1)
stmhal: Make I2C busses and their pins configurable in mpconfigboard.h.
2015-04-18 16:12:57 +01:00
// X-skin: X9=PB6=SCL, X10=PB7=SDA
#define MICROPY_HW_I2C1_SCL (pin_B6)
#define MICROPY_HW_I2C1_SDA (pin_B7)
// Y-skin: Y9=PB10=SCL, Y10=PB11=SDA
#define MICROPY_HW_I2C2_SCL (pin_B10)
#define MICROPY_HW_I2C2_SDA (pin_B11)
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
// USRSW has no pullup or pulldown, and pressing the switch makes the input go low
#define MICROPY_HW_USRSW_PIN (pin_B3)
#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP)
#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING)
#define MICROPY_HW_USRSW_PRESSED (0)
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
// The pyboard has 4 LEDs
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
#define MICROPY_HW_LED1 (pin_A13) // red
#define MICROPY_HW_LED2 (pin_A14) // green
#define MICROPY_HW_LED3 (pin_A15) // yellow
#define MICROPY_HW_LED4 (pin_B4) // blue
stmhal: Make a HW config option for LED4 being controlled by PWM.
2015-02-22 17:54:07 +00:00
#define MICROPY_HW_LED4_PWM (1)
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_PP)
#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRL = pin->pin_mask)
#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRH = pin->pin_mask)
// SD card detect switch
#define MICROPY_HW_SDCARD_DETECT_PIN (pin_A8)
#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP)
#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET)
stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it Since all currently supported boards use pin A9 for this function, the value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used, just the fact that it is defined. Addresses issue #1048.
2015-01-07 23:54:57 +00:00
stmhal: Add MICROPY_HW_USB_OTG_ID_PIN config, set for relevant boards. This config option is for the USB OTG pin, pin A10. This is used on some boards but not others. Eg PYBv3 uses PA10 for LED(2), so it shouldn't be used for OTG ID (actually PA10 is multiplexed on this board, but defaults to LED(2)). Partially addresses issue #1059.
2015-01-12 16:13:29 +00:00
// USB config
stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it Since all currently supported boards use pin A9 for this function, the value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used, just the fact that it is defined. Addresses issue #1048.
2015-01-07 23:54:57 +00:00
#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
stmhal: Add MICROPY_HW_USB_OTG_ID_PIN config, set for relevant boards. This config option is for the USB OTG pin, pin A10. This is used on some boards but not others. Eg PYBv3 uses PA10 for LED(2), so it shouldn't be used for OTG ID (actually PA10 is multiplexed on this board, but defaults to LED(2)). Partially addresses issue #1059.
2015-01-12 16:13:29 +00:00
#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10)