micropython/py/gc.c

919 lines
32 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <assert.h>
2013-10-21 23:45:08 +01:00
#include <stdio.h>
#include <string.h>
#include "py/mpstate.h"
#include "py/gc.h"
#include "py/obj.h"
#include "py/runtime.h"
2014-04-03 22:55:12 +01:00
#if MICROPY_ENABLE_GC
#if MICROPY_DEBUG_VERBOSE // print debugging info
#define DEBUG_PRINT (1)
#define DEBUG_printf DEBUG_printf
#else // don't print debugging info
#define DEBUG_PRINT (0)
#define DEBUG_printf(...) (void)0
#endif
// make this 1 to dump the heap each time it changes
#define EXTENSIVE_HEAP_PROFILING (0)
#define WORDS_PER_BLOCK ((MICROPY_BYTES_PER_GC_BLOCK) / BYTES_PER_WORD)
#define BYTES_PER_BLOCK (MICROPY_BYTES_PER_GC_BLOCK)
2013-10-21 23:45:08 +01:00
// ATB = allocation table byte
// 0b00 = FREE -- free block
// 0b01 = HEAD -- head of a chain of blocks
// 0b10 = TAIL -- in the tail of a chain of blocks
// 0b11 = MARK -- marked head block
#define AT_FREE (0)
#define AT_HEAD (1)
#define AT_TAIL (2)
#define AT_MARK (3)
#define BLOCKS_PER_ATB (4)
#define ATB_MASK_0 (0x03)
#define ATB_MASK_1 (0x0c)
#define ATB_MASK_2 (0x30)
#define ATB_MASK_3 (0xc0)
#define ATB_0_IS_FREE(a) (((a) & ATB_MASK_0) == 0)
#define ATB_1_IS_FREE(a) (((a) & ATB_MASK_1) == 0)
#define ATB_2_IS_FREE(a) (((a) & ATB_MASK_2) == 0)
#define ATB_3_IS_FREE(a) (((a) & ATB_MASK_3) == 0)
#define BLOCK_SHIFT(block) (2 * ((block) & (BLOCKS_PER_ATB - 1)))
#define ATB_GET_KIND(block) ((MP_STATE_MEM(gc_alloc_table_start)[(block) / BLOCKS_PER_ATB] >> BLOCK_SHIFT(block)) & 3)
#define ATB_ANY_TO_FREE(block) do { MP_STATE_MEM(gc_alloc_table_start)[(block) / BLOCKS_PER_ATB] &= (~(AT_MARK << BLOCK_SHIFT(block))); } while (0)
#define ATB_FREE_TO_HEAD(block) do { MP_STATE_MEM(gc_alloc_table_start)[(block) / BLOCKS_PER_ATB] |= (AT_HEAD << BLOCK_SHIFT(block)); } while (0)
#define ATB_FREE_TO_TAIL(block) do { MP_STATE_MEM(gc_alloc_table_start)[(block) / BLOCKS_PER_ATB] |= (AT_TAIL << BLOCK_SHIFT(block)); } while (0)
#define ATB_HEAD_TO_MARK(block) do { MP_STATE_MEM(gc_alloc_table_start)[(block) / BLOCKS_PER_ATB] |= (AT_MARK << BLOCK_SHIFT(block)); } while (0)
#define ATB_MARK_TO_HEAD(block) do { MP_STATE_MEM(gc_alloc_table_start)[(block) / BLOCKS_PER_ATB] &= (~(AT_TAIL << BLOCK_SHIFT(block))); } while (0)
#define BLOCK_FROM_PTR(ptr) (((byte*)(ptr) - MP_STATE_MEM(gc_pool_start)) / BYTES_PER_BLOCK)
#define PTR_FROM_BLOCK(block) (((block) * BYTES_PER_BLOCK + (uintptr_t)MP_STATE_MEM(gc_pool_start)))
2013-10-21 23:45:08 +01:00
#define ATB_FROM_BLOCK(bl) ((bl) / BLOCKS_PER_ATB)
#if MICROPY_ENABLE_FINALISER
// FTB = finaliser table byte
// if set, then the corresponding block may have a finaliser
#define BLOCKS_PER_FTB (8)
#define FTB_GET(block) ((MP_STATE_MEM(gc_finaliser_table_start)[(block) / BLOCKS_PER_FTB] >> ((block) & 7)) & 1)
#define FTB_SET(block) do { MP_STATE_MEM(gc_finaliser_table_start)[(block) / BLOCKS_PER_FTB] |= (1 << ((block) & 7)); } while (0)
#define FTB_CLEAR(block) do { MP_STATE_MEM(gc_finaliser_table_start)[(block) / BLOCKS_PER_FTB] &= (~(1 << ((block) & 7))); } while (0)
#endif
#if MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL
#define GC_ENTER() mp_thread_mutex_lock(&MP_STATE_MEM(gc_mutex), 1)
#define GC_EXIT() mp_thread_mutex_unlock(&MP_STATE_MEM(gc_mutex))
#else
#define GC_ENTER()
#define GC_EXIT()
#endif
// TODO waste less memory; currently requires that all entries in alloc_table have a corresponding block in pool
void gc_init(void *start, void *end) {
// align end pointer on block boundary
end = (void*)((uintptr_t)end & (~(BYTES_PER_BLOCK - 1)));
DEBUG_printf("Initializing GC heap: %p..%p = " UINT_FMT " bytes\n", start, end, (byte*)end - (byte*)start);
// calculate parameters for GC (T=total, A=alloc table, F=finaliser table, P=pool; all in bytes):
// T = A + F + P
// F = A * BLOCKS_PER_ATB / BLOCKS_PER_FTB
// P = A * BLOCKS_PER_ATB * BYTES_PER_BLOCK
// => T = A * (1 + BLOCKS_PER_ATB / BLOCKS_PER_FTB + BLOCKS_PER_ATB * BYTES_PER_BLOCK)
size_t total_byte_len = (byte*)end - (byte*)start;
#if MICROPY_ENABLE_FINALISER
MP_STATE_MEM(gc_alloc_table_byte_len) = total_byte_len * BITS_PER_BYTE / (BITS_PER_BYTE + BITS_PER_BYTE * BLOCKS_PER_ATB / BLOCKS_PER_FTB + BITS_PER_BYTE * BLOCKS_PER_ATB * BYTES_PER_BLOCK);
#else
MP_STATE_MEM(gc_alloc_table_byte_len) = total_byte_len / (1 + BITS_PER_BYTE / 2 * BYTES_PER_BLOCK);
#endif
MP_STATE_MEM(gc_alloc_table_start) = (byte*)start;
2014-04-03 22:55:12 +01:00
#if MICROPY_ENABLE_FINALISER
size_t gc_finaliser_table_byte_len = (MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB + BLOCKS_PER_FTB - 1) / BLOCKS_PER_FTB;
MP_STATE_MEM(gc_finaliser_table_start) = MP_STATE_MEM(gc_alloc_table_start) + MP_STATE_MEM(gc_alloc_table_byte_len);
#endif
2014-04-03 22:55:12 +01:00
size_t gc_pool_block_len = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
MP_STATE_MEM(gc_pool_start) = (byte*)end - gc_pool_block_len * BYTES_PER_BLOCK;
MP_STATE_MEM(gc_pool_end) = end;
#if MICROPY_ENABLE_FINALISER
assert(MP_STATE_MEM(gc_pool_start) >= MP_STATE_MEM(gc_finaliser_table_start) + gc_finaliser_table_byte_len);
#endif
// clear ATBs
memset(MP_STATE_MEM(gc_alloc_table_start), 0, MP_STATE_MEM(gc_alloc_table_byte_len));
#if MICROPY_ENABLE_FINALISER
// clear FTBs
memset(MP_STATE_MEM(gc_finaliser_table_start), 0, gc_finaliser_table_byte_len);
#endif
2014-04-03 22:55:12 +01:00
// set last free ATB index to start of heap
MP_STATE_MEM(gc_last_free_atb_index) = 0;
// unlock the GC
MP_STATE_MEM(gc_lock_depth) = 0;
// allow auto collection
MP_STATE_MEM(gc_auto_collect_enabled) = 1;
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 22:37:30 +01:00
#if MICROPY_GC_ALLOC_THRESHOLD
// by default, maxuint for gc threshold, effectively turning gc-by-threshold off
MP_STATE_MEM(gc_alloc_threshold) = (size_t)-1;
MP_STATE_MEM(gc_alloc_amount) = 0;
#endif
#if MICROPY_PY_THREAD
mp_thread_mutex_init(&MP_STATE_MEM(gc_mutex));
#endif
DEBUG_printf("GC layout:\n");
DEBUG_printf(" alloc table at %p, length " UINT_FMT " bytes, " UINT_FMT " blocks\n", MP_STATE_MEM(gc_alloc_table_start), MP_STATE_MEM(gc_alloc_table_byte_len), MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB);
#if MICROPY_ENABLE_FINALISER
DEBUG_printf(" finaliser table at %p, length " UINT_FMT " bytes, " UINT_FMT " blocks\n", MP_STATE_MEM(gc_finaliser_table_start), gc_finaliser_table_byte_len, gc_finaliser_table_byte_len * BLOCKS_PER_FTB);
#endif
DEBUG_printf(" pool at %p, length " UINT_FMT " bytes, " UINT_FMT " blocks\n", MP_STATE_MEM(gc_pool_start), gc_pool_block_len * BYTES_PER_BLOCK, gc_pool_block_len);
}
void gc_lock(void) {
GC_ENTER();
MP_STATE_MEM(gc_lock_depth)++;
GC_EXIT();
}
void gc_unlock(void) {
GC_ENTER();
MP_STATE_MEM(gc_lock_depth)--;
GC_EXIT();
}
bool gc_is_locked(void) {
return MP_STATE_MEM(gc_lock_depth) != 0;
}
// ptr should be of type void*
#define VERIFY_PTR(ptr) ( \
((uintptr_t)(ptr) & (BYTES_PER_BLOCK - 1)) == 0 /* must be aligned on a block */ \
&& ptr >= (void*)MP_STATE_MEM(gc_pool_start) /* must be above start of pool */ \
&& ptr < (void*)MP_STATE_MEM(gc_pool_end) /* must be below end of pool */ \
)
// ptr should be of type void*
2013-10-21 23:45:08 +01:00
#define VERIFY_MARK_AND_PUSH(ptr) \
do { \
if (VERIFY_PTR(ptr)) { \
size_t _block = BLOCK_FROM_PTR(ptr); \
2013-10-21 23:45:08 +01:00
if (ATB_GET_KIND(_block) == AT_HEAD) { \
/* an unmarked head, mark it, and push it on gc stack */ \
DEBUG_printf("gc_mark(%p)\n", ptr); \
2013-10-21 23:45:08 +01:00
ATB_HEAD_TO_MARK(_block); \
if (MP_STATE_MEM(gc_sp) < &MP_STATE_MEM(gc_stack)[MICROPY_ALLOC_GC_STACK_SIZE]) { \
*MP_STATE_MEM(gc_sp)++ = _block; \
2013-10-21 23:45:08 +01:00
} else { \
MP_STATE_MEM(gc_stack_overflow) = 1; \
2013-10-21 23:45:08 +01:00
} \
} \
} \
} while (0)
STATIC void gc_drain_stack(void) {
while (MP_STATE_MEM(gc_sp) > MP_STATE_MEM(gc_stack)) {
2013-10-21 23:45:08 +01:00
// pop the next block off the stack
size_t block = *--MP_STATE_MEM(gc_sp);
2013-10-21 23:45:08 +01:00
2013-10-22 15:25:25 +01:00
// work out number of consecutive blocks in the chain starting with this one
size_t n_blocks = 0;
2013-10-21 23:45:08 +01:00
do {
n_blocks += 1;
} while (ATB_GET_KIND(block + n_blocks) == AT_TAIL);
// check this block's children
void **ptrs = (void**)PTR_FROM_BLOCK(block);
for (size_t i = n_blocks * BYTES_PER_BLOCK / sizeof(void*); i > 0; i--, ptrs++) {
void *ptr = *ptrs;
VERIFY_MARK_AND_PUSH(ptr);
2013-10-21 23:45:08 +01:00
}
}
}
STATIC void gc_deal_with_stack_overflow(void) {
while (MP_STATE_MEM(gc_stack_overflow)) {
MP_STATE_MEM(gc_stack_overflow) = 0;
MP_STATE_MEM(gc_sp) = MP_STATE_MEM(gc_stack);
2013-10-21 23:45:08 +01:00
// scan entire memory looking for blocks which have been marked but not their children
for (size_t block = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
2013-10-21 23:45:08 +01:00
// trace (again) if mark bit set
if (ATB_GET_KIND(block) == AT_MARK) {
*MP_STATE_MEM(gc_sp)++ = block;
2013-10-21 23:45:08 +01:00
gc_drain_stack();
}
}
}
}
STATIC void gc_sweep(void) {
#if MICROPY_PY_GC_COLLECT_RETVAL
MP_STATE_MEM(gc_collected) = 0;
#endif
2013-10-21 23:45:08 +01:00
// free unmarked heads and their tails
int free_tail = 0;
for (size_t block = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
2013-10-21 23:45:08 +01:00
switch (ATB_GET_KIND(block)) {
case AT_HEAD:
#if MICROPY_ENABLE_FINALISER
if (FTB_GET(block)) {
mp_obj_base_t *obj = (mp_obj_base_t*)PTR_FROM_BLOCK(block);
if (obj->type != NULL) {
// if the object has a type then see if it has a __del__ method
mp_obj_t dest[2];
mp_load_method_maybe(MP_OBJ_FROM_PTR(obj), MP_QSTR___del__, dest);
if (dest[0] != MP_OBJ_NULL) {
// load_method returned a method, execute it in a protected environment
#if MICROPY_ENABLE_SCHEDULER
mp_sched_lock();
#endif
mp_call_function_1_protected(dest[0], dest[1]);
#if MICROPY_ENABLE_SCHEDULER
mp_sched_unlock();
#endif
}
2014-04-03 22:55:12 +01:00
}
// clear finaliser flag
FTB_CLEAR(block);
2014-04-03 22:55:12 +01:00
}
#endif
2013-10-21 23:45:08 +01:00
free_tail = 1;
DEBUG_printf("gc_sweep(%x)\n", PTR_FROM_BLOCK(block));
#if MICROPY_PY_GC_COLLECT_RETVAL
MP_STATE_MEM(gc_collected)++;
#endif
2013-10-21 23:45:08 +01:00
// fall through to free the head
case AT_TAIL:
if (free_tail) {
ATB_ANY_TO_FREE(block);
}
break;
case AT_MARK:
ATB_MARK_TO_HEAD(block);
free_tail = 0;
break;
}
}
}
void gc_collect_start(void) {
GC_ENTER();
MP_STATE_MEM(gc_lock_depth)++;
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 22:37:30 +01:00
#if MICROPY_GC_ALLOC_THRESHOLD
MP_STATE_MEM(gc_alloc_amount) = 0;
#endif
MP_STATE_MEM(gc_stack_overflow) = 0;
MP_STATE_MEM(gc_sp) = MP_STATE_MEM(gc_stack);
// Trace root pointers. This relies on the root pointers being organised
// correctly in the mp_state_ctx structure. We scan nlr_top, dict_locals,
// dict_globals, then the root pointer section of mp_state_vm.
void **ptrs = (void**)(void*)&mp_state_ctx;
gc_collect_root(ptrs, offsetof(mp_state_ctx_t, vm.qstr_last_chunk) / sizeof(void*));
2013-10-21 23:45:08 +01:00
}
void gc_collect_root(void **ptrs, size_t len) {
for (size_t i = 0; i < len; i++) {
void *ptr = ptrs[i];
2013-10-21 23:45:08 +01:00
VERIFY_MARK_AND_PUSH(ptr);
gc_drain_stack();
}
}
void gc_collect_end(void) {
2013-10-21 23:45:08 +01:00
gc_deal_with_stack_overflow();
gc_sweep();
MP_STATE_MEM(gc_last_free_atb_index) = 0;
MP_STATE_MEM(gc_lock_depth)--;
GC_EXIT();
2013-10-22 15:25:25 +01:00
}
2013-10-21 23:45:08 +01:00
2013-10-22 15:25:25 +01:00
void gc_info(gc_info_t *info) {
GC_ENTER();
info->total = MP_STATE_MEM(gc_pool_end) - MP_STATE_MEM(gc_pool_start);
2013-10-22 15:25:25 +01:00
info->used = 0;
info->free = 0;
info->max_free = 0;
2013-10-22 15:25:25 +01:00
info->num_1block = 0;
info->num_2block = 0;
info->max_block = 0;
bool finish = false;
for (size_t block = 0, len = 0, len_free = 0; !finish;) {
size_t kind = ATB_GET_KIND(block);
2013-10-22 15:25:25 +01:00
switch (kind) {
2013-10-21 23:45:08 +01:00
case AT_FREE:
2013-10-22 15:25:25 +01:00
info->free += 1;
len_free += 1;
2013-10-22 15:25:25 +01:00
len = 0;
2013-10-21 23:45:08 +01:00
break;
case AT_HEAD:
2013-10-22 15:25:25 +01:00
info->used += 1;
len = 1;
break;
2013-10-21 23:45:08 +01:00
case AT_TAIL:
2013-10-22 15:25:25 +01:00
info->used += 1;
len += 1;
2013-10-21 23:45:08 +01:00
break;
case AT_MARK:
2013-10-22 15:25:25 +01:00
// shouldn't happen
2013-10-21 23:45:08 +01:00
break;
}
block++;
finish = (block == MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB);
// Get next block type if possible
if (!finish) {
kind = ATB_GET_KIND(block);
}
if (finish || kind == AT_FREE || kind == AT_HEAD) {
if (len == 1) {
info->num_1block += 1;
} else if (len == 2) {
info->num_2block += 1;
}
if (len > info->max_block) {
info->max_block = len;
}
if (finish || kind == AT_HEAD) {
if (len_free > info->max_free) {
info->max_free = len_free;
}
len_free = 0;
}
}
2013-10-21 23:45:08 +01:00
}
2013-10-22 15:25:25 +01:00
info->used *= BYTES_PER_BLOCK;
info->free *= BYTES_PER_BLOCK;
GC_EXIT();
2013-10-21 23:45:08 +01:00
}
void *gc_alloc(size_t n_bytes, bool has_finaliser) {
size_t n_blocks = ((n_bytes + BYTES_PER_BLOCK - 1) & (~(BYTES_PER_BLOCK - 1))) / BYTES_PER_BLOCK;
DEBUG_printf("gc_alloc(" UINT_FMT " bytes -> " UINT_FMT " blocks)\n", n_bytes, n_blocks);
2013-10-21 23:45:08 +01:00
// check for 0 allocation
if (n_blocks == 0) {
return NULL;
}
GC_ENTER();
// check if GC is locked
if (MP_STATE_MEM(gc_lock_depth) > 0) {
GC_EXIT();
2013-10-21 23:45:08 +01:00
return NULL;
}
size_t i;
size_t end_block;
size_t start_block;
size_t n_free = 0;
int collected = !MP_STATE_MEM(gc_auto_collect_enabled);
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 22:37:30 +01:00
#if MICROPY_GC_ALLOC_THRESHOLD
if (!collected && MP_STATE_MEM(gc_alloc_amount) >= MP_STATE_MEM(gc_alloc_threshold)) {
GC_EXIT();
gc_collect();
GC_ENTER();
}
#endif
2013-10-21 23:45:08 +01:00
for (;;) {
// look for a run of n_blocks available blocks
for (i = MP_STATE_MEM(gc_last_free_atb_index); i < MP_STATE_MEM(gc_alloc_table_byte_len); i++) {
byte a = MP_STATE_MEM(gc_alloc_table_start)[i];
if (ATB_0_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 0; goto found; } } else { n_free = 0; }
if (ATB_1_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 1; goto found; } } else { n_free = 0; }
if (ATB_2_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 2; goto found; } } else { n_free = 0; }
if (ATB_3_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 3; goto found; } } else { n_free = 0; }
}
2013-10-21 23:45:08 +01:00
GC_EXIT();
2013-10-21 23:45:08 +01:00
// nothing found!
if (collected) {
return NULL;
}
2014-02-11 16:01:38 +00:00
DEBUG_printf("gc_alloc(" UINT_FMT "): no free mem, triggering GC\n", n_bytes);
2013-10-21 23:45:08 +01:00
gc_collect();
collected = 1;
GC_ENTER();
2013-10-21 23:45:08 +01:00
}
// found, ending at block i inclusive
found:
// get starting and end blocks, both inclusive
end_block = i;
start_block = i - n_free + 1;
// Set last free ATB index to block after last block we found, for start of
// next scan. To reduce fragmentation, we only do this if we were looking
// for a single free block, which guarantees that there are no free blocks
// before this one. Also, whenever we free or shink a block we must check
// if this index needs adjusting (see gc_realloc and gc_free).
if (n_free == 1) {
MP_STATE_MEM(gc_last_free_atb_index) = (i + 1) / BLOCKS_PER_ATB;
}
2013-10-21 23:45:08 +01:00
// mark first block as used head
ATB_FREE_TO_HEAD(start_block);
// mark rest of blocks as used tail
// TODO for a run of many blocks can make this more efficient
for (size_t bl = start_block + 1; bl <= end_block; bl++) {
2013-10-21 23:45:08 +01:00
ATB_FREE_TO_TAIL(bl);
}
// get pointer to first block
// we must create this pointer before unlocking the GC so a collection can find it
void *ret_ptr = (void*)(MP_STATE_MEM(gc_pool_start) + start_block * BYTES_PER_BLOCK);
DEBUG_printf("gc_alloc(%p)\n", ret_ptr);
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 22:37:30 +01:00
#if MICROPY_GC_ALLOC_THRESHOLD
MP_STATE_MEM(gc_alloc_amount) += n_blocks;
#endif
GC_EXIT();
#if MICROPY_GC_CONSERVATIVE_CLEAR
// be conservative and zero out all the newly allocated blocks
memset((byte*)ret_ptr, 0, (end_block - start_block + 1) * BYTES_PER_BLOCK);
#else
// zero out the additional bytes of the newly allocated blocks
// This is needed because the blocks may have previously held pointers
// to the heap and will not be set to something else if the caller
// doesn't actually use the entire block. As such they will continue
// to point to the heap and may prevent other blocks from being reclaimed.
memset((byte*)ret_ptr + n_bytes, 0, (end_block - start_block + 1) * BYTES_PER_BLOCK - n_bytes);
#endif
#if MICROPY_ENABLE_FINALISER
if (has_finaliser) {
// clear type pointer in case it is never set
((mp_obj_base_t*)ret_ptr)->type = NULL;
// set mp_obj flag only if it has a finaliser
GC_ENTER();
FTB_SET(start_block);
GC_EXIT();
2014-04-05 14:49:03 +01:00
}
#else
(void)has_finaliser;
#endif
2014-04-05 14:49:03 +01:00
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table();
#endif
return ret_ptr;
2013-10-21 23:45:08 +01:00
}
/*
void *gc_alloc(mp_uint_t n_bytes) {
2014-04-03 22:55:12 +01:00
return _gc_alloc(n_bytes, false);
}
void *gc_alloc_with_finaliser(mp_uint_t n_bytes) {
2014-04-03 22:55:12 +01:00
return _gc_alloc(n_bytes, true);
}
*/
2014-04-03 22:55:12 +01:00
// force the freeing of a piece of memory
// TODO: freeing here does not call finaliser
void gc_free(void *ptr) {
GC_ENTER();
if (MP_STATE_MEM(gc_lock_depth) > 0) {
// TODO how to deal with this error?
GC_EXIT();
return;
}
DEBUG_printf("gc_free(%p)\n", ptr);
if (ptr == NULL) {
GC_EXIT();
} else {
// get the GC block number corresponding to this pointer
assert(VERIFY_PTR(ptr));
size_t block = BLOCK_FROM_PTR(ptr);
assert(ATB_GET_KIND(block) == AT_HEAD);
#if MICROPY_ENABLE_FINALISER
FTB_CLEAR(block);
#endif
// set the last_free pointer to this block if it's earlier in the heap
if (block / BLOCKS_PER_ATB < MP_STATE_MEM(gc_last_free_atb_index)) {
MP_STATE_MEM(gc_last_free_atb_index) = block / BLOCKS_PER_ATB;
}
// free head and all of its tail blocks
do {
ATB_ANY_TO_FREE(block);
block += 1;
} while (ATB_GET_KIND(block) == AT_TAIL);
GC_EXIT();
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table();
#endif
}
}
size_t gc_nbytes(const void *ptr) {
GC_ENTER();
if (VERIFY_PTR(ptr)) {
size_t block = BLOCK_FROM_PTR(ptr);
2013-10-21 23:45:08 +01:00
if (ATB_GET_KIND(block) == AT_HEAD) {
// work out number of consecutive blocks in the chain starting with this on
size_t n_blocks = 0;
2013-10-21 23:45:08 +01:00
do {
n_blocks += 1;
} while (ATB_GET_KIND(block + n_blocks) == AT_TAIL);
GC_EXIT();
2013-10-21 23:45:08 +01:00
return n_blocks * BYTES_PER_BLOCK;
}
}
// invalid pointer
GC_EXIT();
2013-10-21 23:45:08 +01:00
return 0;
}
2014-03-12 19:00:23 +00:00
#if 0
// old, simple realloc that didn't expand memory in place
void *gc_realloc(void *ptr, mp_uint_t n_bytes) {
mp_uint_t n_existing = gc_nbytes(ptr);
2014-03-07 00:21:51 +00:00
if (n_bytes <= n_existing) {
return ptr;
} else {
bool has_finaliser;
if (ptr == NULL) {
has_finaliser = false;
} else {
#if MICROPY_ENABLE_FINALISER
has_finaliser = FTB_GET(BLOCK_FROM_PTR((mp_uint_t)ptr));
#else
has_finaliser = false;
#endif
}
void *ptr2 = gc_alloc(n_bytes, has_finaliser);
2014-03-07 00:21:51 +00:00
if (ptr2 == NULL) {
return ptr2;
}
memcpy(ptr2, ptr, n_existing);
gc_free(ptr);
return ptr2;
}
}
#else // Alternative gc_realloc impl
void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
// check for pure allocation
if (ptr_in == NULL) {
return gc_alloc(n_bytes, false);
}
// check for pure free
if (n_bytes == 0) {
gc_free(ptr_in);
return NULL;
}
void *ptr = ptr_in;
// sanity check the ptr
if (!VERIFY_PTR(ptr)) {
return NULL;
}
// get first block
size_t block = BLOCK_FROM_PTR(ptr);
GC_ENTER();
// sanity check the ptr is pointing to the head of a block
if (ATB_GET_KIND(block) != AT_HEAD) {
GC_EXIT();
return NULL;
}
if (MP_STATE_MEM(gc_lock_depth) > 0) {
GC_EXIT();
return NULL;
}
// compute number of new blocks that are requested
size_t new_blocks = (n_bytes + BYTES_PER_BLOCK - 1) / BYTES_PER_BLOCK;
// Get the total number of consecutive blocks that are already allocated to
// this chunk of memory, and then count the number of free blocks following
// it. Stop if we reach the end of the heap, or if we find enough extra
// free blocks to satisfy the realloc. Note that we need to compute the
// total size of the existing memory chunk so we can correctly and
// efficiently shrink it (see below for shrinking code).
size_t n_free = 0;
size_t n_blocks = 1; // counting HEAD block
size_t max_block = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
for (size_t bl = block + n_blocks; bl < max_block; bl++) {
byte block_type = ATB_GET_KIND(bl);
if (block_type == AT_TAIL) {
n_blocks++;
continue;
2014-03-12 19:00:23 +00:00
}
if (block_type == AT_FREE) {
n_free++;
if (n_blocks + n_free >= new_blocks) {
// stop as soon as we find enough blocks for n_bytes
break;
}
continue;
}
break;
}
// return original ptr if it already has the requested number of blocks
if (new_blocks == n_blocks) {
GC_EXIT();
return ptr_in;
}
// check if we can shrink the allocated area
if (new_blocks < n_blocks) {
// free unneeded tail blocks
for (size_t bl = block + new_blocks, count = n_blocks - new_blocks; count > 0; bl++, count--) {
ATB_ANY_TO_FREE(bl);
}
// set the last_free pointer to end of this block if it's earlier in the heap
if ((block + new_blocks) / BLOCKS_PER_ATB < MP_STATE_MEM(gc_last_free_atb_index)) {
MP_STATE_MEM(gc_last_free_atb_index) = (block + new_blocks) / BLOCKS_PER_ATB;
}
GC_EXIT();
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table();
#endif
return ptr_in;
}
// check if we can expand in place
if (new_blocks <= n_blocks + n_free) {
// mark few more blocks as used tail
for (size_t bl = block + n_blocks; bl < block + new_blocks; bl++) {
assert(ATB_GET_KIND(bl) == AT_FREE);
ATB_FREE_TO_TAIL(bl);
}
GC_EXIT();
#if MICROPY_GC_CONSERVATIVE_CLEAR
// be conservative and zero out all the newly allocated blocks
memset((byte*)ptr_in + n_blocks * BYTES_PER_BLOCK, 0, (new_blocks - n_blocks) * BYTES_PER_BLOCK);
#else
// zero out the additional bytes of the newly allocated blocks (see comment above in gc_alloc)
memset((byte*)ptr_in + n_bytes, 0, new_blocks * BYTES_PER_BLOCK - n_bytes);
#endif
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table();
#endif
return ptr_in;
}
#if MICROPY_ENABLE_FINALISER
bool ftb_state = FTB_GET(block);
#else
bool ftb_state = false;
#endif
GC_EXIT();
if (!allow_move) {
// not allowed to move memory block so return failure
return NULL;
}
// can't resize inplace; try to find a new contiguous chain
void *ptr_out = gc_alloc(n_bytes, ftb_state);
// check that the alloc succeeded
if (ptr_out == NULL) {
return NULL;
2013-10-21 23:45:08 +01:00
}
DEBUG_printf("gc_realloc(%p -> %p)\n", ptr_in, ptr_out);
memcpy(ptr_out, ptr_in, n_blocks * BYTES_PER_BLOCK);
gc_free(ptr_in);
return ptr_out;
2013-10-21 23:45:08 +01:00
}
#endif // Alternative gc_realloc impl
2014-03-12 19:00:23 +00:00
void gc_dump_info(void) {
2014-02-11 16:01:38 +00:00
gc_info_t info;
gc_info(&info);
mp_printf(&mp_plat_print, "GC: total: %u, used: %u, free: %u\n",
(uint)info.total, (uint)info.used, (uint)info.free);
mp_printf(&mp_plat_print, " No. of 1-blocks: %u, 2-blocks: %u, max blk sz: %u, max free sz: %u\n",
(uint)info.num_1block, (uint)info.num_2block, (uint)info.max_block, (uint)info.max_free);
2014-02-11 16:01:38 +00:00
}
void gc_dump_alloc_table(void) {
GC_ENTER();
static const size_t DUMP_BYTES_PER_LINE = 64;
#if !EXTENSIVE_HEAP_PROFILING
// When comparing heap output we don't want to print the starting
// pointer of the heap because it changes from run to run.
mp_printf(&mp_plat_print, "GC memory layout; from %p:", MP_STATE_MEM(gc_pool_start));
#endif
for (size_t bl = 0; bl < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; bl++) {
if (bl % DUMP_BYTES_PER_LINE == 0) {
// a new line of blocks
{
// check if this line contains only free blocks
size_t bl2 = bl;
while (bl2 < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB && ATB_GET_KIND(bl2) == AT_FREE) {
bl2++;
}
if (bl2 - bl >= 2 * DUMP_BYTES_PER_LINE) {
// there are at least 2 lines containing only free blocks, so abbreviate their printing
mp_printf(&mp_plat_print, "\n (%u lines all free)", (uint)(bl2 - bl) / DUMP_BYTES_PER_LINE);
bl = bl2 & (~(DUMP_BYTES_PER_LINE - 1));
if (bl >= MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB) {
// got to end of heap
break;
}
}
}
// print header for new line of blocks
// (the cast to uint32_t is for 16-bit ports)
//mp_printf(&mp_plat_print, "\n%05x: ", (uint)(PTR_FROM_BLOCK(bl) & (uint32_t)0xfffff));
mp_printf(&mp_plat_print, "\n%05x: ", (uint)((bl * BYTES_PER_BLOCK) & (uint32_t)0xfffff));
}
int c = ' ';
2013-10-22 15:25:25 +01:00
switch (ATB_GET_KIND(bl)) {
case AT_FREE: c = '.'; break;
/* this prints out if the object is reachable from BSS or STACK (for unix only)
case AT_HEAD: {
c = 'h';
void **ptrs = (void**)(void*)&mp_state_ctx;
mp_uint_t len = offsetof(mp_state_ctx_t, vm.stack_top) / sizeof(mp_uint_t);
for (mp_uint_t i = 0; i < len; i++) {
mp_uint_t ptr = (mp_uint_t)ptrs[i];
if (VERIFY_PTR(ptr) && BLOCK_FROM_PTR(ptr) == bl) {
c = 'B';
break;
}
}
if (c == 'h') {
ptrs = (void**)&c;
len = ((mp_uint_t)MP_STATE_THREAD(stack_top) - (mp_uint_t)&c) / sizeof(mp_uint_t);
for (mp_uint_t i = 0; i < len; i++) {
mp_uint_t ptr = (mp_uint_t)ptrs[i];
if (VERIFY_PTR(ptr) && BLOCK_FROM_PTR(ptr) == bl) {
c = 'S';
break;
}
}
}
break;
}
*/
/* this prints the uPy object type of the head block */
case AT_HEAD: {
void **ptr = (void**)(MP_STATE_MEM(gc_pool_start) + bl * BYTES_PER_BLOCK);
if (*ptr == &mp_type_tuple) { c = 'T'; }
else if (*ptr == &mp_type_list) { c = 'L'; }
else if (*ptr == &mp_type_dict) { c = 'D'; }
else if (*ptr == &mp_type_str || *ptr == &mp_type_bytes) { c = 'S'; }
#if MICROPY_PY_BUILTINS_BYTEARRAY
else if (*ptr == &mp_type_bytearray) { c = 'A'; }
#endif
#if MICROPY_PY_ARRAY
else if (*ptr == &mp_type_array) { c = 'A'; }
#endif
#if MICROPY_PY_BUILTINS_FLOAT
else if (*ptr == &mp_type_float) { c = 'F'; }
#endif
else if (*ptr == &mp_type_fun_bc) { c = 'B'; }
else if (*ptr == &mp_type_module) { c = 'M'; }
else {
c = 'h';
#if 0
// This code prints "Q" for qstr-pool data, and "q" for qstr-str
// data. It can be useful to see how qstrs are being allocated,
// but is disabled by default because it is very slow.
for (qstr_pool_t *pool = MP_STATE_VM(last_pool); c == 'h' && pool != NULL; pool = pool->prev) {
if ((qstr_pool_t*)ptr == pool) {
c = 'Q';
break;
}
for (const byte **q = pool->qstrs, **q_top = pool->qstrs + pool->len; q < q_top; q++) {
if ((const byte*)ptr == *q) {
c = 'q';
break;
}
}
}
#endif
}
break;
}
case AT_TAIL: c = '='; break;
case AT_MARK: c = 'm'; break;
2013-10-22 15:25:25 +01:00
}
mp_printf(&mp_plat_print, "%c", c);
2013-10-22 15:25:25 +01:00
}
mp_print_str(&mp_plat_print, "\n");
GC_EXIT();
2013-10-22 15:25:25 +01:00
}
#if DEBUG_PRINT
void gc_test(void) {
mp_uint_t len = 500;
mp_uint_t *heap = malloc(len);
gc_init(heap, heap + len / sizeof(mp_uint_t));
2013-10-21 23:45:08 +01:00
void *ptrs[100];
{
mp_uint_t **p = gc_alloc(16, false);
p[0] = gc_alloc(64, false);
p[1] = gc_alloc(1, false);
p[2] = gc_alloc(1, false);
p[3] = gc_alloc(1, false);
mp_uint_t ***p2 = gc_alloc(16, false);
2013-10-21 23:45:08 +01:00
p2[0] = p;
p2[1] = p;
ptrs[0] = p2;
}
for (int i = 0; i < 25; i+=2) {
mp_uint_t *p = gc_alloc(i, false);
2013-10-21 23:45:08 +01:00
printf("p=%p\n", p);
if (i & 3) {
//ptrs[i] = p;
}
}
printf("Before GC:\n");
gc_dump_alloc_table();
printf("Starting GC...\n");
gc_collect_start();
gc_collect_root(ptrs, sizeof(ptrs) / sizeof(void*));
gc_collect_end();
printf("After GC:\n");
gc_dump_alloc_table();
2013-10-21 23:45:08 +01:00
}
#endif
#endif // MICROPY_ENABLE_GC