micropython/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.mk

MCU_SERIES = f4
CMSIS_MCU = STM32F401xE
AF_FILE = boards/stm32f401_af.csv
LD_FILE = boards/stm32f401xd.ld

# Don't include default frozen modules because MCU is tight on flash space
FROZEN_MPY_DIR ?=
stmhal: Update Makefile and board configs to compile with relocated hal. 2015-07-19 12:17:42 +01:00			`MCU_SERIES = f4`
stmhal: Generate modstm constants per build This causes unnecessary constants to no longer be generated. Some constants (like UART_BRR) are different between the F4 and F7 2015-08-02 18:42:09 +01:00			`CMSIS_MCU = STM32F401xE`
stmhal: Add support for Espruino Pico board. To build: make BOARD=ESPRUINO_PICO To deploy: short the BOOT0/BTN contact on the back of the board (eg by drawing over it with a graphite pencil), then hold down BTN while inserting the board into the USB port. The board should then enter DFU mode, and the firmware can be downloaded using: make BOARD=ESPRUINO_PICO deploy 2015-04-18 21:27:10 +01:00			`AF_FILE = boards/stm32f401_af.csv`
stmhal: Fix ESPRUINO_PICO by adding ld scripts with correct flash size. 2016-10-04 06:28:48 +01:00			`LD_FILE = boards/stm32f401xd.ld`
stmhal: Reduce size of ESPRUINO_PICO build so it fits in flash. The default frozen modules are no longer included (but users can still specify their own via FROZEN_MPY_DIR), complex numbers are disabled and so are the native, viper and asm_thumb emitters. Users needing these features can tune the build to disable other things. 2017-07-12 03:51:37 +01:00
			`# Don't include default frozen modules because MCU is tight on flash space`
			`FROZEN_MPY_DIR ?=`