mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/stmhal/mphalport.h

55 lines
2.3 KiB
C
Raw Normal View History

Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new Conflicts: stmhal/pin_named_pins.c stmhal/readline.c Renamed HAL_H to MICROPY_HAL_H. Made stmhal/mphal.h which intends to define the generic Micro Python HAL, which in stmhal sits above the ST HAL.
2014-07-02 13:42:37 +01:00
// We use the ST Cube HAL library for most hardware peripherals
stmhal: Replace #include "stm32f4xx_hal.h" with #include STM32_HAL_H.
2015-07-28 16:36:26 +01:00
#include STM32_HAL_H
stmhal: Add a function for setting the pin alternate function mp_hal_gpio_set_af will search for a given function and unit and set the alternate function to the alternate function index found.
2016-02-11 05:20:14 +00:00
#include "pin.h"
Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new Conflicts: stmhal/pin_named_pins.c stmhal/readline.c Renamed HAL_H to MICROPY_HAL_H. Made stmhal/mphal.h which intends to define the generic Micro Python HAL, which in stmhal sits above the ST HAL.
2014-07-02 13:42:37 +01:00
stmhal: Add define for UNIQUE_ID address (differs per MCU)
2015-10-29 16:03:10 +00:00
// The unique id address differs per MCU. Ideally this define should
// go in some MCU-specific header, but for now it lives here.
#if defined(MCU_SERIES_F4)
#define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7a10)
#elif defined(MCU_SERIES_F7)
#define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff0f420)
stmhal: L4: Modify mphalport to support L4 MCU. __GPIOI_CLK_ENABLE is defined in hal/l4/inc/Legacy/stm32_hal_legacy.h as __HAL_RCC_GPIOI_CLK_ENABLE, and that latter macro is not defined anywhere else (because the L4 does not have port GPIOI). So the test for GPIOI is needed, along with the test for the CLK_ENABLE macro.
2016-03-22 16:21:05 +00:00
#elif defined(MCU_SERIES_L4)
#define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7590)
stmhal: Add define for UNIQUE_ID address (differs per MCU)
2015-10-29 16:03:10 +00:00
#else
all: Add py/mphal.h and use it in all ports. py/mphal.h contains declarations for generic mp_hal_XXX functions, such as stdio and delay/ticks, which ports should provide definitions for. A port will also provide mphalport.h with further HAL declarations.
2015-10-30 23:03:58 +00:00
#error mphalport.h: Unrecognized MCU_SERIES
stmhal: Add define for UNIQUE_ID address (differs per MCU)
2015-10-29 16:03:10 +00:00
#endif
Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new Conflicts: stmhal/pin_named_pins.c stmhal/readline.c Renamed HAL_H to MICROPY_HAL_H. Made stmhal/mphal.h which intends to define the generic Micro Python HAL, which in stmhal sits above the ST HAL.
2014-07-02 13:42:37 +01:00
// Basic GPIO functions
#define GPIO_read_pin(gpio, pin) (((gpio)->IDR >> (pin)) & 1)
stmhal: L4: Modify mphalport to support L4 MCU. __GPIOI_CLK_ENABLE is defined in hal/l4/inc/Legacy/stm32_hal_legacy.h as __HAL_RCC_GPIOI_CLK_ENABLE, and that latter macro is not defined anywhere else (because the L4 does not have port GPIOI). So the test for GPIOI is needed, along with the test for the CLK_ENABLE macro.
2016-03-22 16:21:05 +00:00
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4)
stmhal: Add STM32F7DISC and associated changes.
2015-07-28 19:13:33 +01:00
#define GPIO_set_pin(gpio, pin_mask) (((gpio)->BSRR) = (pin_mask))
#define GPIO_clear_pin(gpio, pin_mask) (((gpio)->BSRR) = ((pin_mask) << 16))
#else
Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new Conflicts: stmhal/pin_named_pins.c stmhal/readline.c Renamed HAL_H to MICROPY_HAL_H. Made stmhal/mphal.h which intends to define the generic Micro Python HAL, which in stmhal sits above the ST HAL.
2014-07-02 13:42:37 +01:00
#define GPIO_set_pin(gpio, pin_mask) (((gpio)->BSRRL) = (pin_mask))
#define GPIO_clear_pin(gpio, pin_mask) (((gpio)->BSRRH) = (pin_mask))
stmhal: Add STM32F7DISC and associated changes.
2015-07-28 19:13:33 +01:00
#endif
Add support for selecting pin alternate functions from python. Converts generted pins to use qstrs instead of string pointers. This patch also adds the following functions: pyb.Pin.names() pyb.Pin.af_list() pyb.Pin.gpio() dir(pyb.Pin.board) and dir(pyb.Pin.cpu) also produce useful results. pyb.Pin now takes kw args. pyb.Pin.__str__ now prints more useful information about the pin configuration. I found the following functions in my boot.py to be useful: ```python def pins(): for pin_name in dir(pyb.Pin.board): pin = pyb.Pin(pin_name) print('{:10s} {:s}'.format(pin_name, str(pin))) def af(): for pin_name in dir(pyb.Pin.board): pin = pyb.Pin(pin_name) print('{:10s} {:s}'.format(pin_name, str(pin.af_list()))) ```
2014-07-22 15:57:36 +01:00
#define GPIO_read_output_pin(gpio, pin) (((gpio)->ODR >> (pin)) & 1)
stmhal: Use OSError with POSIX error code for HAL errors. Addresses issue #921.
2014-10-23 14:25:32 +01:00
stmhal: Factor GPIO clock enable logic into mp_hal_gpio_clock_enable. Extracted GPIO clock enable logic into mp_hal_gpio_clock_enable and called from anyplace which might need to use GPIO functions on ports other than A-D. Thanks to Dave Hylands for the patch.
2015-08-03 00:05:16 +01:00
void mp_hal_gpio_clock_enable(GPIO_TypeDef *gpio);
stmhal: Implement basic C-level pin HAL.
2016-04-12 13:50:47 +01:00
void mp_hal_gpio_config(GPIO_TypeDef *gpio, uint32_t pin, uint32_t mode, uint32_t pull, uint32_t alt);
stmhal: Add a function for setting the pin alternate function mp_hal_gpio_set_af will search for a given function and unit and set the alternate function to the alternate function index found.
2016-02-11 05:20:14 +00:00
bool mp_hal_gpio_set_af(const pin_obj_t *pin, GPIO_InitTypeDef *init, uint8_t fn, uint8_t unit);
stmhal: Factor GPIO clock enable logic into mp_hal_gpio_clock_enable. Extracted GPIO clock enable logic into mp_hal_gpio_clock_enable and called from anyplace which might need to use GPIO functions on ports other than A-D. Thanks to Dave Hylands for the patch.
2015-08-03 00:05:16 +01:00
all: Add py/mphal.h and use it in all ports. py/mphal.h contains declarations for generic mp_hal_XXX functions, such as stdio and delay/ticks, which ports should provide definitions for. A port will also provide mphalport.h with further HAL declarations.
2015-10-30 23:03:58 +00:00
extern const unsigned char mp_hal_status_to_errno_table[4];
stmhal: Use OSError with POSIX error code for HAL errors. Addresses issue #921.
2014-10-23 14:25:32 +01:00
NORETURN void mp_hal_raise(HAL_StatusTypeDef status);
stmhal: Reduce coupling between USB driver and readline. This makes it easier to re-use readline.c and pyexec.c from stmhal in other ports.
2014-11-27 16:58:31 +00:00
void mp_hal_set_interrupt_char(int c); // -1 to disable
stmhal: Make pybstdio usable by other ports, and use it. Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
stmhal: Enable machine.time_pulse_us() function.
2016-10-06 02:12:20 +01:00
// timing functions
stmhal: Use new generic I2C object in machine module.
2016-04-12 13:51:39 +01:00
#include "stmhal/systick.h"
stmhal: Enable machine.time_pulse_us() function.
2016-10-06 02:12:20 +01:00
#define mp_hal_delay_ms HAL_Delay
stmhal: Use new generic I2C object in machine module.
2016-04-12 13:51:39 +01:00
#define mp_hal_delay_us_fast(us) sys_tick_udelay(us)
stmhal: Enable machine.time_pulse_us() function.
2016-10-06 02:12:20 +01:00
#define mp_hal_ticks_ms HAL_GetTick
#define mp_hal_ticks_us() sys_tick_get_microseconds()
stmhal: Use new generic I2C object in machine module.
2016-04-12 13:51:39 +01:00
stmhal: Implement basic C-level pin HAL.
2016-04-12 13:50:47 +01:00
// C-level pin HAL
#include "stmhal/pin.h"
stmhal/mphalport: Change pin obj type to const pointer, to avoid casts.
2016-10-05 05:51:40 +01:00
#define mp_hal_pin_obj_t const pin_obj_t*
#define mp_hal_get_pin_obj(o) pin_find(o)
stmhal/mphalport: Implement mp_hal_pin_{input,output,write}.
2016-10-03 06:44:34 +01:00
#define mp_hal_pin_input(p) mp_hal_gpio_config((p)->gpio, (p)->pin, 0, 0, 0)
#define mp_hal_pin_output(p) mp_hal_gpio_config((p)->gpio, (p)->pin, 1, 0, 0)
extmod/machine_i2c: Redo mp_hal_pin macros to use open_drain and od_low. mp_hal_pin_config_od is renamed mp_hal_pin_open_drain, and mp_hal_pin_low is mp_hal_pin_od_low.
2016-05-26 17:06:40 +01:00
#define mp_hal_pin_open_drain(p) mp_hal_gpio_config((p)->gpio, (p)->pin, 5, 0, 0)
#define mp_hal_pin_od_low(p) GPIO_clear_pin((p)->gpio, (p)->pin_mask)
stmhal: Implement basic C-level pin HAL.
2016-04-12 13:50:47 +01:00
#define mp_hal_pin_od_high(p) GPIO_set_pin((p)->gpio, (p)->pin_mask)
#define mp_hal_pin_read(p) GPIO_read_pin((p)->gpio, (p)->pin)
stmhal/mphalport: Fix mp_hal_pin_write to use correct pin_mask.
2016-10-03 08:06:58 +01:00
#define mp_hal_pin_write(p, v) do { if (v) { GPIO_set_pin((p)->gpio, (p)->pin_mask); } else { GPIO_clear_pin((p)->gpio, (p)->pin_mask); } } while (0)