qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
#include <stdint.h>
|
2017-02-16 06:23:06 +00:00
|
|
|
#include <stdlib.h>
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <string.h>
|
2015-01-12 12:07:42 +00:00
|
|
|
#include <malloc.h>
|
2017-12-19 00:15:41 +00:00
|
|
|
#include <setjmp.h>
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
|
2015-01-08 22:12:44 +00:00
|
|
|
#include "py/compile.h"
|
|
|
|
|
#include "py/runtime.h"
|
|
|
|
|
#include "py/stackctrl.h"
|
2015-01-12 12:07:42 +00:00
|
|
|
#include "py/gc.h"
|
2017-03-14 00:25:52 +00:00
|
|
|
#include "py/mperrno.h"
|
2021-07-09 05:19:15 +01:00
|
|
|
#include "shared/runtime/gchelper.h"
|
2019-12-17 02:18:08 +00:00
|
|
|
#include "lib/tinytest/tinytest.h"
|
|
|
|
|
#include "lib/tinytest/tinytest_macros.h"
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
|
2018-09-24 03:09:28 +01:00
|
|
|
#define HEAP_SIZE (100 * 1024)
|
2016-03-15 13:42:36 +00:00
|
|
|
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
#include "genhdr/tests.h"
|
|
|
|
|
|
|
|
|
|
int main() {
|
2016-01-28 23:05:53 +00:00
|
|
|
mp_stack_ctrl_init();
|
2015-01-08 22:12:44 +00:00
|
|
|
mp_stack_set_limit(10240);
|
2018-09-24 03:09:28 +01:00
|
|
|
static uint32_t heap[HEAP_SIZE / sizeof(uint32_t)];
|
2017-12-11 18:04:27 +00:00
|
|
|
upytest_set_heap(heap, (char *)heap + HEAP_SIZE);
|
2017-12-08 17:15:45 +00:00
|
|
|
int r = tinytest_main(0, NULL, groups);
|
|
|
|
|
printf("status: %d\n", r);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
return r;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void gc_collect(void) {
|
2015-01-12 12:07:42 +00:00
|
|
|
gc_collect_start();
|
2020-04-23 07:12:55 +01:00
|
|
|
gc_helper_collect_regs_and_stack();
|
2015-01-12 12:07:42 +00:00
|
|
|
gc_collect_end();
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
}
|
|
|
|
|
|
2023-09-27 04:43:50 +01:00
|
|
|
mp_lexer_t *mp_lexer_new_from_file(qstr filename) {
|
2017-03-14 00:25:52 +00:00
|
|
|
mp_raise_OSError(MP_ENOENT);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void nlr_jump_fail(void *val) {
|
2017-02-16 06:23:06 +00:00
|
|
|
printf("uncaught NLR\n");
|
|
|
|
|
exit(1);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
2014-05-05 17:06:45 +01:00
|
|
|
}
|
