mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/cc3200/hal/prcm.h

281 lines
13 KiB
C
Raw Normal View History

cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
//*****************************************************************************
//
// prcm.h
//
// Prototypes for the PRCM control driver.
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __PRCM_H__
#define __PRCM_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Peripheral clock and reset control registers
//
//*****************************************************************************
typedef struct _PRCM_PeripheralRegs_
{
cc3200: Change PRCM_PeriphRegs_t fields to unsigned char. This helps saving ~300 bytes. Thanks to dpgeorge.
2015-02-25 22:25:23 +00:00
unsigned char ulClkReg;
unsigned char ulRstReg;
cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
}PRCM_PeriphRegs_t;
//*****************************************************************************
// Values that can be passed to PRCMPeripheralEnable() and
// PRCMPeripheralDisable()
//*****************************************************************************
#define PRCM_RUN_MODE_CLK 0x00000001
#define PRCM_SLP_MODE_CLK 0x00000100
#define PRCM_DSLP_MODE_CLK 0x00010000
//*****************************************************************************
// Values that can be passed to PRCMSRAMRetentionEnable() and
// PRCMSRAMRetentionDisable() as ulSramColSel.
//*****************************************************************************
#define PRCM_SRAM_COL_1 0x00000001
#define PRCM_SRAM_COL_2 0x00000002
#define PRCM_SRAM_COL_3 0x00000004
#define PRCM_SRAM_COL_4 0x00000008
//*****************************************************************************
// Values that can be passed to PRCMSRAMRetentionEnable() and
// PRCMSRAMRetentionDisable() as ulModeFlags.
//*****************************************************************************
#define PRCM_SRAM_DSLP_RET 0x00000001
#define PRCM_SRAM_LPDS_RET 0x00000002
//*****************************************************************************
// Values that can be passed to PRCMLPDSWakeupSourceEnable(),
// PRCMLPDSWakeupCauseGet() and PRCMLPDSWakeupSourceDisable().
//*****************************************************************************
#define PRCM_LPDS_HOST_IRQ 0x00000080
#define PRCM_LPDS_GPIO 0x00000010
#define PRCM_LPDS_TIMER 0x00000001
//*****************************************************************************
// Values that can be passed to PRCMLPDSWakeUpGPIOSelect() as Type
//*****************************************************************************
#define PRCM_LPDS_LOW_LEVEL 0x00000002
#define PRCM_LPDS_HIGH_LEVEL 0x00000000
#define PRCM_LPDS_FALL_EDGE 0x00000001
#define PRCM_LPDS_RISE_EDGE 0x00000003
//*****************************************************************************
// Values that can be passed to PRCMLPDSWakeUpGPIOSelect()
//*****************************************************************************
#define PRCM_LPDS_GPIO2 0x00000000
#define PRCM_LPDS_GPIO4 0x00000001
#define PRCM_LPDS_GPIO13 0x00000002
#define PRCM_LPDS_GPIO17 0x00000003
#define PRCM_LPDS_GPIO11 0x00000004
#define PRCM_LPDS_GPIO24 0x00000005
#define PRCM_LPDS_GPIO26 0x00000006
//*****************************************************************************
// Values that can be passed to PRCMHibernateWakeupSourceEnable(),
// PRCMHibernateWakeupSourceDisable().
//*****************************************************************************
#define PRCM_HIB_SLOW_CLK_CTR 0x00000001
//*****************************************************************************
// Values that can be passed to PRCMHibernateWakeUpGPIOSelect() as ulType
//*****************************************************************************
#define PRCM_HIB_LOW_LEVEL 0x00000000
#define PRCM_HIB_HIGH_LEVEL 0x00000001
#define PRCM_HIB_FALL_EDGE 0x00000002
#define PRCM_HIB_RISE_EDGE 0x00000003
//*****************************************************************************
// Values that can be passed to PRCMHibernateWakeupSourceEnable(),
// PRCMHibernateWakeupSourceDisable(), PRCMHibernateWakeUpGPIOSelect()
//*****************************************************************************
#define PRCM_HIB_GPIO2 0x00010000
#define PRCM_HIB_GPIO4 0x00020000
#define PRCM_HIB_GPIO13 0x00040000
#define PRCM_HIB_GPIO17 0x00080000
#define PRCM_HIB_GPIO11 0x00100000
#define PRCM_HIB_GPIO24 0x00200000
#define PRCM_HIB_GPIO26 0x00400000
//*****************************************************************************
// Values that will be returned from PRCMSysResetCauseGet().
//*****************************************************************************
#define PRCM_POWER_ON 0x00000000
#define PRCM_LPDS_EXIT 0x00000001
#define PRCM_CORE_RESET 0x00000003
#define PRCM_MCU_RESET 0x00000004
#define PRCM_WDT_RESET 0x00000005
#define PRCM_SOC_RESET 0x00000006
#define PRCM_HIB_EXIT 0x00000007
//*****************************************************************************
// Values that can be passed to PRCMHibernateWakeupCauseGet().
//*****************************************************************************
#define PRCM_HIB_WAKEUP_CAUSE_SLOW_CLOCK 0x00000002
#define PRCM_HIB_WAKEUP_CAUSE_GPIO 0x00000004
//*****************************************************************************
cc3200: Make peripheral objects static. This prevents duplication of objects in the sleep list. Also helps with reducing the code size by ~100 bytes.
2015-03-17 10:05:59 +00:00
// Values that can be passed to PRCMIntEnable
cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
//*****************************************************************************
#define PRCM_INT_SLOW_CLK_CTR 0x00004000
//*****************************************************************************
// Values that can be passed to PRCMPeripheralClkEnable(),
// PRCMPeripheralClkDisable(), PRCMPeripheralReset()
//*****************************************************************************
#define PRCM_CAMERA 0x00000000
#define PRCM_I2S 0x00000001
#define PRCM_SDHOST 0x00000002
#define PRCM_GSPI 0x00000003
#define PRCM_LSPI 0x00000004
#define PRCM_UDMA 0x00000005
#define PRCM_GPIOA0 0x00000006
#define PRCM_GPIOA1 0x00000007
#define PRCM_GPIOA2 0x00000008
#define PRCM_GPIOA3 0x00000009
#define PRCM_GPIOA4 0x0000000A
#define PRCM_WDT 0x0000000B
#define PRCM_UARTA0 0x0000000C
#define PRCM_UARTA1 0x0000000D
#define PRCM_TIMERA0 0x0000000E
#define PRCM_TIMERA1 0x0000000F
#define PRCM_TIMERA2 0x00000010
#define PRCM_TIMERA3 0x00000011
#define PRCM_DTHE 0x00000012
#define PRCM_SSPI 0x00000013
#define PRCM_I2CA0 0x00000014
// Note : PRCM_ADC is a dummy define for pinmux utility code generation
// PRCM_ADC should never be used in any user code.
#define PRCM_ADC 0x000000FF
//*****************************************************************************
//
// API Function prototypes
//
//*****************************************************************************
cc3200: Rewrite the PRCM RTC functionality methods. This allows to use the On-Chip retention registers for both the RTC and to share notification flags between the bootloader and the application. The two flags being shared right now are the "safe boot" request and the WDT reset cause. we still have 2 more bits free for future use.
2015-03-14 08:59:47 +00:00
extern void PRCMRequestSafeBoot(void);
extern void PRCMClearSafeBootRequest(void);
extern tBoolean PRCMIsSafeBootRequested(void);
extern void PRCMSignalWDTReset(void);
extern void PRCMClearWDTResetSignal(void);
extern tBoolean PRCMWasResetBecauseOfWDT(void);
cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
extern void PRCMSOCReset(void);
extern void PRCMMCUReset(tBoolean bIncludeSubsystem);
extern unsigned long PRCMSysResetCauseGet(void);
extern void PRCMPeripheralClkEnable(unsigned long ulPeripheral,
unsigned long ulClkFlags);
extern void PRCMPeripheralClkDisable(unsigned long ulPeripheral,
unsigned long ulClkFlags);
extern void PRCMPeripheralReset(unsigned long ulPeripheral);
extern tBoolean PRCMPeripheralStatusGet(unsigned long ulPeripheral);
extern void PRCMI2SClockFreqSet(unsigned long ulI2CClkFreq);
extern unsigned long PRCMPeripheralClockGet(unsigned long ulPeripheral);
extern void PRCMSleepEnter(void);
extern void PRCMDeepSleepEnter(void);
extern void PRCMSRAMRetentionEnable(unsigned long ulSramColSel,
unsigned long ulFlags);
extern void PRCMSRAMRetentionDisable(unsigned long ulSramColSel,
unsigned long ulFlags);
extern void PRCMLPDSRestoreInfoSet(unsigned long ulRestoreSP,
unsigned long ulRestorePC);
extern void PRCMLPDSEnter(void);
extern void PRCMLPDSIntervalSet(unsigned long ulTicks);
extern void PRCMLPDSWakeupSourceEnable(unsigned long ulLpdsWakeupSrc);
extern unsigned long PRCMLPDSWakeupCauseGet(void);
extern void PRCMLPDSWakeUpGPIOSelect(unsigned long ulGPIOPin,
unsigned long ulType);
extern void PRCMLPDSWakeupSourceDisable(unsigned long ulLpdsWakeupSrc);
extern void PRCMHibernateEnter(void);
extern void PRCMHibernateWakeupSourceEnable(unsigned long ulHIBWakupSrc);
extern unsigned long PRCMHibernateWakeupCauseGet(void);
extern void PRCMHibernateWakeUpGPIOSelect(unsigned long ulMultiGPIOBitMap,
unsigned long ulType);
extern void PRCMHibernateWakeupSourceDisable(unsigned long ulHIBWakupSrc);
extern void PRCMHibernateIntervalSet(unsigned long long ullTicks);
extern unsigned long long PRCMSlowClkCtrGet(void);
extern void PRCMSlowClkCtrMatchSet(unsigned long long ullTicks);
extern unsigned long long PRCMSlowClkCtrMatchGet(void);
extern void PRCMOCRRegisterWrite(unsigned char ucIndex,
unsigned long ulRegValue);
extern unsigned long PRCMOCRRegisterRead(unsigned char ucIndex);
extern void PRCMIntRegister(void (*pfnHandler)(void));
extern void PRCMIntUnregister(void);
extern void PRCMIntEnable(unsigned long ulIntFlags);
extern void PRCMIntDisable(unsigned long ulIntFlags);
extern unsigned long PRCMIntStatus(void);
extern void PRCMRTCInUseSet(void);
cc3200: Rewrite the PRCM RTC functionality methods. This allows to use the On-Chip retention registers for both the RTC and to share notification flags between the bootloader and the application. The two flags being shared right now are the "safe boot" request and the WDT reset cause. we still have 2 more bits free for future use.
2015-03-14 08:59:47 +00:00
extern void PRCMRTCInUseClear(void);
cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
extern tBoolean PRCMRTCInUseGet(void);
extern void PRCMRTCSet(unsigned long ulSecs, unsigned short usMsec);
extern void PRCMRTCGet(unsigned long *ulSecs, unsigned short *usMsec);
extern void PRCMRTCMatchSet(unsigned long ulSecs, unsigned short usMsec);
extern void PRCMRTCMatchGet(unsigned long *ulSecs, unsigned short *usMsec);
extern void PRCMCC3200MCUInit(void);
extern unsigned long PRCMHIBRegRead(unsigned long ulRegAddr);
extern void PRCMHIBRegWrite(unsigned long ulRegAddr, unsigned long ulValue);
cc3200: Update HAL to SDK release version 1.1.0.
2015-03-15 09:05:15 +00:00
extern unsigned long PRCMCameraFreqSet(unsigned char ulDivider, unsigned char ulWidth);
cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __PRCM_H__