micropython/ports/renesas-ra/mpconfigport.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

234 lines
7.5 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013-2017 Damien P. George
* Copyright (c) 2021,2022 Renesas Electronics Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Options to control how MicroPython is built for this port,
// overriding defaults in py/mpconfig.h.
// board specific definitions
#include "mpconfigboard.h"
#include "mpconfigboard_common.h"
#ifndef MICROPY_CONFIG_ROM_LEVEL
#define MICROPY_CONFIG_ROM_LEVEL (MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES)
#endif
// memory allocation policies
#ifndef MICROPY_GC_STACK_ENTRY_TYPE
#if MICROPY_HW_SDRAM_SIZE
#define MICROPY_GC_STACK_ENTRY_TYPE uint32_t
#else
#define MICROPY_GC_STACK_ENTRY_TYPE uint16_t
#endif
#endif
#define MICROPY_ALLOC_PATH_MAX (128)
// optimisations
#ifndef MICROPY_OPT_COMPUTED_GOTO
#define MICROPY_OPT_COMPUTED_GOTO (1)
#endif
// Don't enable lookup cache on M0 (low RAM)
#ifndef MICROPY_OPT_MAP_LOOKUP_CACHE
#define MICROPY_OPT_MAP_LOOKUP_CACHE (__CORTEX_M > 0)
#endif
// emitters
#define MICROPY_PERSISTENT_CODE_LOAD (1)
#ifndef MICROPY_EMIT_THUMB
#define MICROPY_EMIT_THUMB (1)
#endif
#ifndef MICROPY_EMIT_INLINE_THUMB
#define MICROPY_EMIT_INLINE_THUMB (1)
#endif
// Python internal features
#define MICROPY_READER_VFS (1)
#define MICROPY_ENABLE_GC (1)
#define MICROPY_ENABLE_EMERGENCY_EXCEPTION_BUF (1)
#define MICROPY_EMERGENCY_EXCEPTION_BUF_SIZE (0)
#define MICROPY_REPL_INFO (1)
#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ)
#ifndef MICROPY_FLOAT_IMPL // can be configured by each board via mpconfigboard.mk
#define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT)
#endif
#define MICROPY_USE_INTERNAL_ERRNO (1)
#define MICROPY_SCHEDULER_DEPTH (8)
#define MICROPY_VFS (1)
// control over Python builtins
#ifndef MICROPY_PY_BUILTINS_HELP_TEXT
#define MICROPY_PY_BUILTINS_HELP_TEXT ra_help_text
#endif
#define MICROPY_PY_IO_FILEIO (MICROPY_VFS_FAT || MICROPY_VFS_LFS1 || MICROPY_VFS_LFS2)
#ifndef MICROPY_PY_SYS_PLATFORM // let boards override it if they want
#define MICROPY_PY_SYS_PLATFORM "renesas-ra"
#endif
#ifndef MICROPY_PY_THREAD
#define MICROPY_PY_THREAD (0)
#endif
// extended modules
#define MICROPY_PY_UOS_INCLUDEFILE "ports/renesas-ra/moduos.c"
#define MICROPY_PY_OS_DUPTERM (3)
#define MICROPY_PY_UOS_DUPTERM_BUILTIN_STREAM (1)
#define MICROPY_PY_UOS_DUPTERM_STREAM_DETACHED_ATTACHED (1)
#define MICROPY_PY_UOS_SEP (1)
#define MICROPY_PY_UOS_SYNC (1)
#define MICROPY_PY_UOS_UNAME (1)
#define MICROPY_PY_UOS_URANDOM (MICROPY_HW_ENABLE_RNG)
#ifndef MICROPY_PY_UTIME
#define MICROPY_PY_UTIME (1)
#endif
#define MICROPY_PY_UTIME_MP_HAL (MICROPY_PY_UTIME)
#ifndef MICROPY_PY_UTIMEQ
#define MICROPY_PY_UTIMEQ (1)
#endif
#ifndef MICROPY_PY_MACHINE
#define MICROPY_PY_MACHINE (1)
#ifndef MICROPY_PY_MACHINE_BITSTREAM
#define MICROPY_PY_MACHINE_BITSTREAM (1)
#endif
#define MICROPY_PY_MACHINE_PULSE (1)
#define MICROPY_PY_MACHINE_PIN_MAKE_NEW mp_pin_make_new
#define MICROPY_PY_MACHINE_I2C (1)
#define MICROPY_PY_MACHINE_SOFTI2C (1)
#define MICROPY_PY_MACHINE_SPI (1)
#define MICROPY_PY_MACHINE_SPI_MSB (SPI_FIRSTBIT_MSB)
#define MICROPY_PY_MACHINE_SPI_LSB (SPI_FIRSTBIT_LSB)
#define MICROPY_PY_MACHINE_SOFTSPI (1)
#endif
#define MICROPY_HW_SOFTSPI_MIN_DELAY (0)
#define MICROPY_HW_SOFTSPI_MAX_BAUDRATE (48000000 / 48)
#ifndef MICROPY_PY_ONEWIRE
#define MICROPY_PY_ONEWIRE (1)
#endif
#ifndef MICROPY_PY_UPLATFORM
#define MICROPY_PY_UPLATFORM (1)
#endif
// fatfs configuration used in ffconf.h
#define MICROPY_FATFS_ENABLE_LFN (1)
#define MICROPY_FATFS_LFN_CODE_PAGE 437 /* 1=SFN/ANSI 437=LFN/U.S.(OEM) */
#define MICROPY_FATFS_USE_LABEL (1)
#define MICROPY_FATFS_RPATH (2)
#define MICROPY_FATFS_MULTI_PARTITION (1)
// TODO these should be generic, not bound to a particular FS implementation
#if MICROPY_VFS_FAT
#define mp_type_fileio mp_type_vfs_fat_fileio
#define mp_type_textio mp_type_vfs_fat_textio
#elif MICROPY_VFS_LFS1
#define mp_type_fileio mp_type_vfs_lfs1_fileio
#define mp_type_textio mp_type_vfs_lfs1_textio
#elif MICROPY_VFS_LFS2
#define mp_type_fileio mp_type_vfs_lfs2_fileio
#define mp_type_textio mp_type_vfs_lfs2_textio
#endif
#if MICROPY_PY_MACHINE
#define MACHINE_BUILTIN_MODULE_CONSTANTS \
{ MP_ROM_QSTR(MP_QSTR_umachine), MP_ROM_PTR(&mp_module_machine) }, \
{ MP_ROM_QSTR(MP_QSTR_machine), MP_ROM_PTR(&mp_module_machine) },
#else
#define MACHINE_BUILTIN_MODULE_CONSTANTS
#endif
// extra constants
#define MICROPY_PORT_CONSTANTS \
MACHINE_BUILTIN_MODULE_CONSTANTS \
#define MP_STATE_PORT MP_STATE_VM
// type definitions for the specific machine
#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((uint32_t)(p) | 1))
#define MP_SSIZE_MAX (0x7fffffff)
// Assume that if we already defined the obj repr then we also defined these items
#ifndef MICROPY_OBJ_REPR
#define UINT_FMT "%u"
#define INT_FMT "%d"
typedef int mp_int_t; // must be pointer size
typedef unsigned int mp_uint_t; // must be pointer size
#endif
typedef long mp_off_t;
// We have inlined IRQ functions for efficiency (they are generally
// 1 machine instruction).
//
// Note on IRQ state: you should not need to know the specific
// value of the state variable, but rather just pass the return
// value from disable_irq back to enable_irq. If you really need
// to know the machine-specific values, see irq.h.
static inline void enable_irq(mp_uint_t state) {
__set_PRIMASK(state);
}
static inline mp_uint_t disable_irq(void) {
mp_uint_t state = __get_PRIMASK();
__disable_irq();
return state;
}
#define MICROPY_BEGIN_ATOMIC_SECTION() disable_irq()
#define MICROPY_END_ATOMIC_SECTION(state) enable_irq(state)
#if MICROPY_PY_THREAD
#define MICROPY_EVENT_POLL_HOOK \
do { \
extern void mp_handle_pending(bool); \
mp_handle_pending(true); \
if (pyb_thread_enabled) { \
MP_THREAD_GIL_EXIT(); \
pyb_thread_yield(); \
MP_THREAD_GIL_ENTER(); \
} else { \
__WFI(); \
} \
} while (0);
#define MICROPY_THREAD_YIELD() pyb_thread_yield()
#else
#define MICROPY_EVENT_POLL_HOOK \
do { \
extern void mp_handle_pending(bool); \
mp_handle_pending(true); \
__WFI(); \
} while (0);
#define MICROPY_THREAD_YIELD()
#endif
// We need an implementation of the log2 function which is not a macro
#define MP_NEED_LOG2 (1)
// We need to provide a declaration/definition of alloca()
#include <alloca.h>