mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/mimxrt/hal/qspi_hyper_flash_config.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

187 lines
12 KiB
C
Raw Normal View History

mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
mimxrt: Allow for board-specific flash driver files. If in a board's mkconfigboard.mk the following symbol is set: MICROPY_HW_BOARD_FLASH_FILES = 1 then the files: ($BOARD)_flexspi_flash_config.h and qspi_nor_flash_config.c and/or qspi_hyper_flash_config.c are expected in the board directory. Otherwise the common files from the hal directory are used.
2021-12-17 15:29:26 +00:00
#include BOARD_FLASH_CONFIG_HEADER_H
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
.sflashA1Size = MICROPY_HW_FLASH_SIZE,
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */