mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/stm32/boards/NETDUINO_PLUS_2/pins.csv

38 lines
350 B
Plaintext
Raw Normal View History

Initial checkin with STM HAL This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything.
2014-03-12 06:55:41 +00:00
D0,PC7
D1,PC6
D2,PA3
D3,PA2
D4,PB12
D5,PB8
D6,PB9
D7,PA1
D8,PA0
D9,PA6
D10,PB10
D11,PB15
D12,PB14
D13,PB13
stmhal: Some NETDUINO_PLUS_2 cleanup - Put the I2C bus on the corect pins - Add the appropriate board_init to power the shield
2016-02-13 05:25:00 +00:00
SDA,PB6
SCL,PB7
Initial checkin with STM HAL This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything.
2014-03-12 06:55:41 +00:00
A0,PC0
A1,PC1
A2,PC2
A3,PC3
A4,PC4
A5,PC5
LED,PA10
SW,PB11
PWR_LED,PC13
PWR_SD,PB1
PWR_HDR,PB2
PWR_ETH,PC15
RST_ETH,PD2
stmhal: Refactor UART configuration to use pin objects. This follows the pattern of other peripherals (I2C, SPI) to specify the pins using pin objects instead of a pair of GPIO port and pin number. It makes it easier to customise the UART pins for a particular board.
2016-12-05 01:21:45 +00:00
UART1_TX,PA9
UART3_TX,PD8
UART3_RX,PD9
UART3_RTS,PD12
UART3_CTS,PD11
UART5_TX,PC12
stm32/boards: Update pins.csv to include USB pins where needed.
2018-05-01 08:38:51 +01:00
USB_DM,PA11
USB_DP,PA12