2014-11-29 15:06:20 +00:00
|
|
|
Micro Python port to ESP8266
|
|
|
|
============================
|
|
|
|
|
|
|
|
This is a port of Micro Python to the Espressif ESP8266 wifi module.
|
|
|
|
|
|
|
|
Currently implemented features include:
|
|
|
|
- REPL (Python prompt) over UART0.
|
|
|
|
- 24k heap RAM available for Python code.
|
|
|
|
- Garbage collector, exceptions.
|
|
|
|
- Unicode support.
|
2015-06-17 11:12:49 +01:00
|
|
|
- Builtin modules: gc, array, collections, io, struct, sys, esp, network.
|
|
|
|
- C long-long type used as bignum implementation (gives 64 bit signed ints).
|
|
|
|
- Rudimentary WiFi support in station mode.
|
|
|
|
- Sockets with callbacks.
|
|
|
|
- Basic GPIO support.
|
2014-11-29 15:06:20 +00:00
|
|
|
|
|
|
|
Note that floating-point numbers are not supported.
|
|
|
|
|
|
|
|
On the TODO list:
|
2015-06-17 11:12:49 +01:00
|
|
|
- Full wifi support.
|
2014-11-29 15:06:20 +00:00
|
|
|
- Internal filesystem using the flash.
|
|
|
|
- ...
|
|
|
|
|
|
|
|
Build instructions
|
|
|
|
------------------
|
|
|
|
|
|
|
|
The tool chain required for the build is the OpenSource ESP SDK, which can be
|
|
|
|
found at <https://github.com/pfalcon/esp-open-sdk>. Clone this repository and
|
2014-12-06 11:34:18 +00:00
|
|
|
run `make` in its directory to build and install the SDK locally.
|
2014-11-29 15:06:20 +00:00
|
|
|
|
|
|
|
Then, to build Micro Python for the ESP8266, just run:
|
|
|
|
```bash
|
|
|
|
$ make
|
|
|
|
```
|
|
|
|
This should produce binary images in the `build/` subdirectory. To flash them
|
|
|
|
to your ESP8266, use:
|
|
|
|
```bash
|
|
|
|
$ make deploy
|
|
|
|
```
|
|
|
|
This will use the `esptool.py` script to download the images. You must have
|
|
|
|
your ESP module in the bootloader, and connected to a serial port on your PC.
|
|
|
|
The default serial port is `/dev/ttyACM0`. To specify another, use, eg:
|
|
|
|
```bash
|
|
|
|
$ make PORT=/dev/ttyUSB0 deploy
|
|
|
|
```
|
|
|
|
|
|
|
|
The images that are built are:
|
|
|
|
- `firmware.elf-0x00000.bin`: to be flashed at 0x00000
|
|
|
|
- `firmware.elf-0x10000.bin`: to be flashed at 0x10000
|
|
|
|
|
|
|
|
There is also a combined image, made up of the above 2 binary files with the
|
|
|
|
appropriate padding:
|
|
|
|
- `firmware-combined.bin`: to be flashed at 0x00000
|