mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/mimxrt/boards/SEEED_ARCH_MIX/mpconfigboard.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

19 lines
411 B
Makefile
Raw Normal View History

mimxrt/boards: Add the Seeed ARCH MIX board. The ARCH MIX board exposes the Ethernet Pins at it's connectors. Therefore the software is configured for using a LAN8720 PHY device. Breakout boards with the LAN8720 are easily available.
2021-10-06 19:30:46 +01:00
MCU_SERIES = MIMXRT1052
MCU_VARIANT = MIMXRT1052DVL6B
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
mimxrt/boards: Remove conditional assignment of flash type/size. Removes conditional assignment because respective variables should only be set in board makefile fragments. Hence no conditional assignment needed.
2022-06-23 18:00:54 +01:00
MICROPY_HW_FLASH_TYPE = qspi_nor_flash
MICROPY_HW_FLASH_SIZE = 0x800000 # 8MB
mimxrt/boards: Add the Seeed ARCH MIX board. The ARCH MIX board exposes the Ethernet Pins at it's connectors. Therefore the software is configured for using a LAN8720 PHY device. Breakout boards with the LAN8720 are easily available.
2021-10-06 19:30:46 +01:00
MICROPY_HW_SDRAM_AVAIL = 1
MICROPY_HW_SDRAM_SIZE = 0x2000000 # 32MB
MICROPY_PY_LWIP = 1
MICROPY_PY_USSL = 1
MICROPY_SSL_MBEDTLS = 1
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 20:24:20 +01:00
ports: Make all network-capable boards use bundle-networking. This will ensure that any board with networking support gets: - webrepl - mip - urequests - ntptime This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-27 03:17:19 +00:00
FROZEN_MANIFEST ?= $(BOARD_DIR)/manifest.py
CFLAGS += -DSPI_RETRY_TIMES=1000000