mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/samd/clock_config.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

35 lines
1.5 KiB
C
Raw Normal View History

samd/clock_config: Set up the clock configuration. Clock settings: - GCLK0: 48 MHz (SAMD21) or 120 MHz(SAMD51). - GCLK1: 32768 Hz for driving the PLL. - GCLK2: 48 MHz for tzhe peripheral clock. - GCLK3: 1 MHz (SAMD21) or 8 MHz (SAMD51) for the µs ticks timer. - GCLK8: 1 kHz for WDT (SAMD21 only). If a 32 kHz crystal is present, it will be used as clock source. Otherwise the DFLL48M in open-loop mode is used. GCLK0 for SAM51 can be changed between 48 MHz and 200 MHz. The specified range is 96 MHz - 120 MHz.
2022-06-04 15:31:46 +01:00
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* This file provides functions for configuring the clocks.
*
* The MIT License (MIT)
*
* Copyright (c) 2022 Robert Hammelrath
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
void init_clocks(uint32_t cpu_freq);
void set_cpu_freq(uint32_t cpu_freq);
uint32_t get_cpu_freq(void);
samd: Change the symbol names for the peripheral clocks. From APB_FREQ to DFLL48M_FREQ, and from apb_freq to peripheral_freq.
2022-06-30 15:50:15 +01:00
uint32_t get_peripheral_freq(void);
samd/clock_config: Add HW_DFLL_USB_SYNC and HW_MCU_OSC32KULP extensions. Two new compile flags are: MICROPY_HW_DFLL_USB_SYNC: Effective only if DFLL48 does not run from the crystal. It will synchronize the DFLL48M clock with the USB's SOF pulse. If no USB is connected, it will fall back to open loop mode. The DFLL48M clock is then pretty precise, but with a higher clock jitter at SAMD51 devices. MICROPY_HW_MCU_OSC32KULP: Effective only if the devics uses a crystal as clock source. Run the MCU clock from the ULP 32kHz oszillator instead of the crystal. This flag was added to cater for a interference problem of the crystal and Neopixel/Debug pins at Adafruit FEATHER Mx boards, which causes the board to crash. Drawback: ticks_ms() and time.time() vs. than ticks_us() and the peripherals like PWM run at not synchronous clocks.
2022-06-15 17:58:02 +01:00
void check_usb_recovery_mode(void);
samd/clock_config: Set up the clock configuration. Clock settings: - GCLK0: 48 MHz (SAMD21) or 120 MHz(SAMD51). - GCLK1: 32768 Hz for driving the PLL. - GCLK2: 48 MHz for tzhe peripheral clock. - GCLK3: 1 MHz (SAMD21) or 8 MHz (SAMD51) for the µs ticks timer. - GCLK8: 1 kHz for WDT (SAMD21 only). If a 32 kHz crystal is present, it will be used as clock source. Otherwise the DFLL48M in open-loop mode is used. GCLK0 for SAM51 can be changed between 48 MHz and 200 MHz. The specified range is 96 MHz - 120 MHz.
2022-06-04 15:31:46 +01:00
void enable_sercom_clock(int id);