stm32/powerctrl: Move L0's SystemClock_Config to powerctrlboot.c file.

ports/stm32/Makefile

@@ -233,6 +233,7 @@ SRC_C = \
 	pendsv.c \
 	systick.c  \
 	powerctrl.c \
+	powerctrlboot.c \
 	pybthread.c \
 	factoryreset.c \
 	timer.c \

ports/stm32/main.c

@@ -71,8 +71,6 @@
 #include "can.h"
 #include "modnetwork.h"
 
-void SystemClock_Config(void);
-
 #if MICROPY_PY_THREAD
 STATIC pyb_thread_t pyb_thread_main;
 #endif

ports/stm32/powerctrl.c

@@ -84,30 +84,6 @@ void powerctrl_check_enter_bootloader(void) {
     }
 }
 
-#if defined(STM32L0)
-void SystemClock_Config(void) {
-    // Enable power control peripheral
-    __HAL_RCC_PWR_CLK_ENABLE();
-
-    // Use the 16MHz internal oscillator
-    RCC->CR |= RCC_CR_HSION;
-    while (!(RCC->CR & RCC_CR_HSIRDY)) {
-    }
-    const uint32_t sysclk_src = 1;
-
-    // Select SYSCLK source
-    RCC->CFGR |= sysclk_src << RCC_CFGR_SW_Pos;
-    while (((RCC->CFGR >> RCC_CFGR_SWS_Pos) & 0x3) != sysclk_src) {
-        // Wait for SYSCLK source to change
-    }
-
-    SystemCoreClockUpdate();
-
-    HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
-    HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
-}
-#endif
-
 #if !defined(STM32F0) && !defined(STM32L0)
 
 // Assumes that PLL is used as the SYSCLK source

ports/stm32/powerctrl.h

@@ -28,6 +28,8 @@
 
 #include <stdint.h>
 
+void SystemClock_Config(void);
+
 NORETURN void powerctrl_mcu_reset(void);
 NORETURN void powerctrl_enter_bootloader(uint32_t r0, uint32_t bl_addr);
 void powerctrl_check_enter_bootloader(void);

ports/stm32/powerctrlboot.c

@@ -0,0 +1,54 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018-2019 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/mphal.h"
+#include "powerctrl.h"
+
+#if defined(STM32L0)
+
+void SystemClock_Config(void) {
+    // Enable power control peripheral
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    // Use the 16MHz internal oscillator
+    RCC->CR |= RCC_CR_HSION;
+    while (!(RCC->CR & RCC_CR_HSIRDY)) {
+    }
+    const uint32_t sysclk_src = 1;
+
+    // Select SYSCLK source
+    RCC->CFGR |= sysclk_src << RCC_CFGR_SW_Pos;
+    while (((RCC->CFGR >> RCC_CFGR_SWS_Pos) & 0x3) != sysclk_src) {
+        // Wait for SYSCLK source to change
+    }
+
+    SystemCoreClockUpdate();
+
+    HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
+    HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
+}
+
+#endif