stm32/boards/LEGO_HUB_NO6: Add comment to readme about powering off.

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2022-06-09 12:23:07 +10:00
parent 45a0c6da5b
commit 3452ee58d3
1 changed files with 4 additions and 2 deletions

View File

@ -33,7 +33,8 @@ Backing up original Hub firmware
Before install MicroPython it is advised to backup the original LEGO firmware that
the Hub comes installed with. To do this, enter the built-in bootloader by holding
down the Bluetooth button for 5 seconds while powering up the Hub via USB. Then
down the Bluetooth button for 5 seconds while powering up the Hub via USB (you may
need to take out the battery and disconnect USB to power off the Hub first). Then
run the following command from the root of this repository:
$ cd ports/stm32
@ -58,7 +59,8 @@ the root of this repository run:
$ make BOARD=LEGO_HUB_NO6
Now enter the built-in bootloader by holding down the Bluetooth button for 5
seconds while powering up the Hub via USB. Then run:
seconds while powering up the Hub via USB (you may need to take out the battery
and disconnect USB to power off the Hub first). Then run:
$ make BOARD=LEGO_HUB_NO6 deploy