cc3200: Reenable active interrupts when waking from suspended mode.

cc3200/boards/cc3200_prefix.c

@@ -50,5 +50,5 @@
     .af       = PIN_MODE_0, \
     .strength = PIN_STRENGTH_4MA, \
     .mode     = GPIO_DIR_MODE_IN, \
-    .used     = false \
+    .isused   = false, \
 }

cc3200/misc/mpcallback.c

@@ -62,6 +62,7 @@ mp_obj_t mpcallback_new (mp_obj_t parent, mp_obj_t handler, const mp_cb_methods_
     self->handler = handler;
     self->parent = parent;
     self->methods = (mp_cb_methods_t *)methods;
+    self->isenabled = true;
     // remove any old callback if present
     mpcallback_remove(self->parent);
     mp_obj_list_append(&MP_STATE_PORT(mpcallback_obj_list), self);
@@ -79,6 +80,16 @@ mpcallback_obj_t *mpcallback_find (mp_obj_t parent) {
     return NULL;
 }
 
+void mpcallback_wake_all (void) {
+    // re-enable all active callback objects one by one
+    for (mp_uint_t i = 0; i < MP_STATE_PORT(mpcallback_obj_list).len; i++) {
+        mpcallback_obj_t *callback_obj = ((mpcallback_obj_t *)(MP_STATE_PORT(mpcallback_obj_list).items[i]));
+        if (callback_obj->isenabled) {
+            callback_obj->methods->enable(callback_obj->parent);
+        }
+    }
+}
+
 void mpcallback_remove (const mp_obj_t parent) {
     mpcallback_obj_t *callback_obj;
     if ((callback_obj = mpcallback_find(parent))) {
@@ -158,6 +169,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(callback_init_obj, 1, callback_init);
 STATIC mp_obj_t callback_enable (mp_obj_t self_in) {
     mpcallback_obj_t *self = self_in;
     self->methods->enable(self->parent);
+    self->isenabled = true;
     return mp_const_none;
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(callback_enable_obj, callback_enable);
@@ -167,6 +179,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(callback_enable_obj, callback_enable);
 STATIC mp_obj_t callback_disable (mp_obj_t self_in) {
     mpcallback_obj_t *self = self_in;
     self->methods->disable(self->parent);
+    self->isenabled = false;
     return mp_const_none;
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(callback_disable_obj, callback_disable);

cc3200/misc/mpcallback.h

@@ -49,6 +49,7 @@ typedef struct {
     mp_obj_t parent;
     mp_obj_t handler;
     mp_cb_methods_t *methods;
+    bool isenabled;
 } mpcallback_obj_t;
 
 /******************************************************************************
@@ -63,6 +64,7 @@ extern const mp_obj_type_t pyb_callback_type;
 void mpcallback_init0 (void);
 mp_obj_t mpcallback_new (mp_obj_t parent, mp_obj_t handler, const mp_cb_methods_t *methods);
 mpcallback_obj_t *mpcallback_find (mp_obj_t parent);
+void mpcallback_wake_all (void);
 void mpcallback_remove (const mp_obj_t parent);
 void mpcallback_handler (mp_obj_t self_in);
 uint mpcallback_translate_priority (uint priority);

cc3200/mods/pybpin.c

@@ -199,13 +199,10 @@ void pin_verify_af (uint af) {
 
 void pin_config (pin_obj_t *self, uint af, uint mode, uint type, uint strength) {
     // configure the pin in analog mode
-    self->af = af;
-    self->mode = mode;
-    self->type = type;
-    self->strength = strength;
+    self->af = af, self->mode = mode, self->type = type, self->strength = strength;
     pin_obj_configure ((const pin_obj_t *)self);
     // mark the pin as used
-    self->used = true;
+    self->isused = true;
     // register it with the sleep module
     pybsleep_add ((const mp_obj_t)self, (WakeUpCB_t)pin_obj_configure);
 }

cc3200/mods/pybpin.h

@@ -42,7 +42,7 @@ typedef struct {
     uint8_t             af;
     uint8_t             strength;
     uint8_t             mode;
-    bool                used;
+    bool                isused;
 } pin_obj_t;
 
 extern const mp_obj_type_t pin_type;

cc3200/mods/pybsleep.c

@@ -322,12 +322,12 @@ STATIC NORETURN void pybsleep_suspend_enter (void) {
         nvic_reg_store->int_priority[i] = base_reg_addr[i];
     }
 
+    // switch off the heartbeat led (this makes sure it will blink as soon as we wake up)
+    mperror_heartbeat_switch_off();
+
     // park the gpio pins
     pybsleep_iopark();
 
-    // turn-off the heartbeat led
-    mperror_heartbeat_switch_off();
-
     // store the cpu registers
     sleep_store();
 
@@ -384,12 +384,15 @@ void pybsleep_suspend_exit (void) {
     // ungate the clock to the shared spi bus
     MAP_PRCMPeripheralClkEnable(PRCM_SSPI, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
 
-    // reinitialize simplelink's bus
+    // reinitialize simplelink's interface
     sl_IfOpen (NULL, 0);
 
     // restore the configuration of all active peripherals
     pybsleep_obj_wakeup();
 
+    // reconfigure all the previously enabled interrupts
+    mpcallback_wake_all();
+
     // trigger a sw interrupt
     MAP_IntPendSet(INT_PRCM);
 
@@ -450,11 +453,11 @@ STATIC void pybsleep_iopark (void) {
 #endif
             break;
         default:
-            if (!pin->used) {
-                // enable the pull-down in unused pins
+            // enable a weak pull-down if the pin is unused
+            if (!pin->isused) {
                 MAP_PinConfigSet(pin->pin_num, pin->strength, PIN_TYPE_STD_PD);
             }
-            // make the pin an input
+            // make it an input
             MAP_PinDirModeSet(pin->pin_num, PIN_DIR_MODE_IN);
             break;
         }
@@ -610,8 +613,9 @@ STATIC mp_obj_t pyb_sleep_hibernate (mp_obj_t self_in) {
         }
     }
     wlan_stop(SL_STOP_TIMEOUT);
-    mperror_heartbeat_switch_off();
     pybsleep_flash_powerdown();
+    // must be done just before entering hibernate mode
+    pybsleep_iopark();
     MAP_PRCMHibernateEnter();
     return mp_const_none;
 }

cc3200/mods/pybuart.c

@@ -346,7 +346,7 @@ STATIC void pyb_uart_print(void (*print)(void *env, const char *fmt, ...), void
     }
 }
 
-/// \method init(baudrate, bits=8, parity=None, stop=1, *, timeout=1000, timeout_char=0, read_buf_len=128)
+/// \method init(baudrate, bits=8, parity=None, stop=1, *, timeout=1000, timeout_char=0)
 ///
 /// Initialise the UART bus with the given parameters:
 ///

cc3200/telnet/telnet.c

@@ -110,7 +110,7 @@ static telnet_data_t telnet_data;
 static const char* telnet_welcome_msg       = "Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n";
 static const char* telnet_request_user      = "Login as:";
 static const char* telnet_request_password  = "Password:";
-static const char* telnet_invalid_loggin    = "\r\nInvalid credentials, try again\r\n";
+static const char* telnet_invalid_loggin    = "\r\nInvalid credentials, try again.\r\n";
 static const char* telnet_loggin_success    = "\r\nLogin succeeded!\r\nType \"help()\" for more information.\r\n";
 static const uint8_t telnet_options_user[]  = // IAC   WONT ECHO IAC   WONT SUPPRESS_GO_AHEAD IAC  WILL LINEMODE
                                                { 255,  252,   1, 255,  252,       3,          255, 251,   34 };
@@ -217,10 +217,8 @@ void telnet_run (void) {
                 break;
             case E_TELNET_STE_SUB_LOGGIN_SUCCESS:
                 if (E_TELNET_RESULT_OK == telnet_send_non_blocking((void *)telnet_loggin_success, strlen(telnet_loggin_success))) {
-                    // clear the current line
+                    // clear the current line and force the prompt
                     telnet_reset_buffer();
-                    // fake an "enter" key pressed to display the prompt
-                    telnet_data.rxBuffer[telnet_data.rxWindex++] = '\r';
                     telnet_data.state= E_TELNET_STE_LOGGED_IN;
                 }
             default:
@@ -478,7 +476,10 @@ static void telnet_reset (void) {
 }
 
 static void telnet_reset_buffer (void) {
+    // erase any characters present in the current line
     memset (telnet_data.rxBuffer, '\b', TELNET_RX_BUFFER_SIZE / 2);
     telnet_data.rxWindex = TELNET_RX_BUFFER_SIZE / 2;
+    // fake an "enter" key pressed to display the prompt
+    telnet_data.rxBuffer[telnet_data.rxWindex++] = '\r';
 }