docs/machine: Add initial docs for new machine.SDCard class.
This commit is contained in:
Nicko van Someren
Damien George
parent
8e3af7d4c8
commit
6077d17150
|
|
@ -1,8 +1,8 @@
|
|||
.. currentmodule:: machine
|
||||
.. _machine.SD:
|
||||
|
||||
class SD -- secure digital memory card
|
||||
======================================
|
||||
class SD -- secure digital memory card (cc3200 port only)
|
||||
=========================================================
|
||||
|
||||
.. warning::
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,122 @@
|
|||
.. currentmodule:: machine
|
||||
.. _machine.SDCard:
|
||||
|
||||
class SDCard -- secure digital memory card
|
||||
==========================================
|
||||
|
||||
SD cards are one of the most common small form factor removable storage media.
|
||||
SD cards come in a variety of sizes and phsyical form factors. MMC cards are
|
||||
similar removable storage devices while eMMC devices are electically similar
|
||||
storage devices designed to be embedded into other systems. All three form
|
||||
share a common protocol for communication with their host system and high-level
|
||||
support looks the same for them all. As such in MicroPython they are implemented
|
||||
in a single class called :class:`machine.SDCard` .
|
||||
|
||||
Both SD and MMC interfaces support being accessed with a variety of bus widths.
|
||||
When being accessed with a 1-bit wide interface they can be accessed using the
|
||||
SPI protocol. Different MicroPython hardware platforms support different widths
|
||||
and pin configurations but for most platforms there is a standard configuation
|
||||
for any given hardware. In general constructing an `SDCard`` object with without
|
||||
passing any parameters will initialise the interface to the default card slot
|
||||
for the current hardware. The arguments listed below represent the common
|
||||
arguments that might need to be set in order to use either a non-stanard slot
|
||||
or a non-standard pin assignment. The exact subset of arguments suported will
|
||||
vary from platform to platform.
|
||||
|
||||
.. class:: SDCard(slot=1, width=1, cd=None, wp=None, sck=None, miso=None, mosi=None, cs=None)
|
||||
|
||||
This class provides access to SD or MMC storage cards using either
|
||||
a dedicated SD/MMC interface hardware or through an SPI channel.
|
||||
The class implements the block protocol defined by :class:`uos.AbstractBlockDev`.
|
||||
This allows the mounting of an SD card to be as simple as::
|
||||
|
||||
uos.mount(storage.SDCard(), "/sd")
|
||||
|
||||
The constrcutor takes the following paramters:
|
||||
|
||||
- *slot* selects which of the available interfaces to use. Leaving this
|
||||
unset will select the default interface.
|
||||
|
||||
- *width* selects the bus width for the SD/MMC interface.
|
||||
|
||||
- *cd* can be used to specify a card-detect pin.
|
||||
|
||||
- *wp* can be used to specify a write-protect pin.
|
||||
|
||||
- *sck* can be used to specify an SPI clock pin.
|
||||
|
||||
- *miso* can be used to specify an SPI miso pin.
|
||||
|
||||
- *mosi* can be used to specify an SPI mosi pin.
|
||||
|
||||
- *cs* can be used to specify an SPI chip select pin.
|
||||
|
||||
Implementation-specific details
|
||||
-------------------------------
|
||||
|
||||
Different implementations of the ``SDCard`` class on different hardware support
|
||||
varying subsets of the options above.
|
||||
|
||||
PyBoard
|
||||
```````
|
||||
|
||||
The standard PyBoard has just one slot. No arguments are necessary or supported.
|
||||
|
||||
ESP32
|
||||
`````
|
||||
|
||||
The ESP32 provides two channels of SD/MMC hardware and also supports
|
||||
access to SD Cards through either of the two SPI ports that are
|
||||
generally available to the user. As a result the *slot* argument can
|
||||
take a value between 0 and 3, inclusive. Slots 0 and 1 use the
|
||||
built-in SD/MMC hardware while slots 2 and 3 use the SPI ports. Slot 0
|
||||
supports 1, 4 or 8-bit wide access while slot 1 supports 1 or 4-bit
|
||||
access; the SPI slots only support 1-bit access.
|
||||
|
||||
.. note:: Slot 0 is used to communicate with on-board flash memory
|
||||
on most ESP32 modules and so will be unavailable to the
|
||||
user.
|
||||
|
||||
.. note:: Most ESP32 modules that provide an SD card slot using the
|
||||
dedicated hardware only wire up 1 data pin, so the default
|
||||
value for *width* is 1.
|
||||
|
||||
The pins used by the dedicated SD/MMC hardware are fixed. The pins
|
||||
used by the SPI hardware can be reassigned.
|
||||
|
||||
.. note:: If any of the SPI signals are remapped then all of the SPI
|
||||
signals will pass through a GPIO multiplexer unit which
|
||||
can limit the performance of high frequency signals. Since
|
||||
the normal operating speed for SD cards is 40MHz this can
|
||||
cause problems on some cards.
|
||||
|
||||
The default (and preferred) pin assignment are as follows:
|
||||
|
||||
====== ====== ====== ====== ======
|
||||
Slot 0 1 2 3
|
||||
------ ------ ------ ------ ------
|
||||
Signal Pin Pin Pin Pin
|
||||
====== ====== ====== ====== ======
|
||||
sck 6 14 18 14
|
||||
cmd 11 15
|
||||
cs 5 15
|
||||
miso 19 12
|
||||
mosi 23 13
|
||||
D0 7 2
|
||||
D1 8 4
|
||||
D2 9 12
|
||||
D3 10 13
|
||||
D4 16
|
||||
D5 17
|
||||
D6 5
|
||||
D7 18
|
||||
====== ====== ====== ====== ======
|
||||
|
||||
cc3200
|
||||
``````
|
||||
|
||||
You can set the pins used for SPI access by passing a tuple as the
|
||||
*pins* argument.
|
||||
|
||||
*Note:* The current cc3200 SD card implementation names the this class
|
||||
:class:`machine.SD` rather than :class:`machine.SDCard` .
|
||||
|
|
@ -168,3 +168,4 @@ Classes
|
|||
machine.Timer.rst
|
||||
machine.WDT.rst
|
||||
machine.SD.rst
|
||||
machine.SDCard.rst
|
||||
|
|
|
|||
Loading…
Reference in New Issue