docs: Update to use new WLAN argument names for ssid/security/key.

Addresses issue #8083.

docs/esp32/quickref.rst

@@ -76,12 +76,12 @@ The :mod:`network` module::
     wlan.active(True)       # activate the interface
     wlan.scan()             # scan for access points
     wlan.isconnected()      # check if the station is connected to an AP
-    wlan.connect('essid', 'password') # connect to an AP
+    wlan.connect('ssid', 'key') # connect to an AP
     wlan.config('mac')      # get the interface's MAC address
     wlan.ifconfig()         # get the interface's IP/netmask/gw/DNS addresses
 
     ap = network.WLAN(network.AP_IF) # create access-point interface
-    ap.config(essid='ESP-AP') # set the ESSID of the access point
+    ap.config(ssid='ESP-AP') # set the SSID of the access point
     ap.config(max_clients=10) # set how many clients can connect to the network
     ap.active(True)         # activate the interface
 
@@ -93,7 +93,7 @@ A useful function for connecting to your local WiFi network is::
         wlan.active(True)
         if not wlan.isconnected():
             print('connecting to network...')
-            wlan.connect('essid', 'password')
+            wlan.connect('ssid', 'key')
             while not wlan.isconnected():
                 pass
         print('network config:', wlan.ifconfig())

docs/esp8266/quickref.rst

@@ -57,13 +57,13 @@ The :mod:`network` module::
     wlan.active(True)       # activate the interface
     wlan.scan()             # scan for access points
     wlan.isconnected()      # check if the station is connected to an AP
-    wlan.connect('essid', 'password') # connect to an AP
+    wlan.connect('ssid', 'key') # connect to an AP
     wlan.config('mac')      # get the interface's MAC address
     wlan.ifconfig()         # get the interface's IP/netmask/gw/DNS addresses
 
     ap = network.WLAN(network.AP_IF) # create access-point interface
     ap.active(True)         # activate the interface
-    ap.config(essid='ESP-AP') # set the ESSID of the access point
+    ap.config(ssid='ESP-AP') # set the SSID of the access point
 
 A useful function for connecting to your local WiFi network is::
 
@@ -73,7 +73,7 @@ A useful function for connecting to your local WiFi network is::
         wlan.active(True)
         if not wlan.isconnected():
             print('connecting to network...')
-            wlan.connect('essid', 'password')
+            wlan.connect('ssid', 'key')
             while not wlan.isconnected():
                 pass
         print('network config:', wlan.ifconfig())

docs/esp8266/tutorial/network_basics.rst

@@ -37,7 +37,7 @@ First activate the station interface::
 
 Then connect to your WiFi network::
 
-    >>> sta_if.connect('<your ESSID>', '<your password>')
+    >>> sta_if.connect('<your SSID>', '<your key>')
 
 To check if the connection is established use::
 
@@ -61,7 +61,7 @@ connect to your WiFi network::
         if not sta_if.isconnected():
             print('connecting to network...')
             sta_if.active(True)
-            sta_if.connect('<essid>', '<password>')
+            sta_if.connect('<ssid>', '<key>')
             while not sta_if.isconnected():
                 pass
         print('network config:', sta_if.ifconfig())

docs/library/network.WLAN.rst

@@ -10,7 +10,7 @@ This class provides a driver for WiFi network processors.  Example usage::
     # enable station interface and connect to WiFi access point
     nic = network.WLAN(network.STA_IF)
     nic.active(True)
-    nic.connect('your-ssid', 'your-password')
+    nic.connect('your-ssid', 'your-key')
     # now use sockets as usual
 
 Constructors
@@ -32,9 +32,9 @@ Methods
     argument is passed. Otherwise, query current state if no argument is
     provided. Most other methods require active interface.
 
-.. method:: WLAN.connect(ssid=None, password=None, *, bssid=None)
+.. method:: WLAN.connect(ssid=None, key=None, *, bssid=None)
 
-    Connect to the specified wireless network, using the specified password.
+    Connect to the specified wireless network, using the specified key.
     If *bssid* is given then the connection will be restricted to the
     access-point with that MAC address (the *ssid* must also be specified
     in this case).
@@ -52,12 +52,12 @@ Methods
     Scanning is only possible on STA interface. Returns list of tuples with
     the information about WiFi access points:
 
-        (ssid, bssid, channel, RSSI, authmode, hidden)
+        (ssid, bssid, channel, RSSI, security, hidden)
 
     *bssid* is hardware address of an access point, in binary form, returned as
     bytes object. You can use `binascii.hexlify()` to convert it to ASCII form.
 
-    There are five values for authmode:
+    There are five values for security:
 
         * 0 -- open
         * 1 -- WEP
@@ -112,10 +112,10 @@ Methods
    multiple parameters can be set at once. For querying, parameters name should
    be quoted as a string, and only one parameter can be queries at time::
 
-    # Set WiFi access point name (formally known as ESSID) and WiFi channel
+    # Set WiFi access point name (formally known as SSID) and WiFi channel
-    ap.config(essid='My AP', channel=11)
+    ap.config(ssid='My AP', channel=11)
     # Query params one by one
-    print(ap.config('essid'))
+    print(ap.config('ssid'))
     print(ap.config('channel'))
 
    Following are commonly supported parameters (availability of a specific parameter
@@ -125,11 +125,11 @@ Methods
    Parameter      Description
    =============  ===========
    mac            MAC address (bytes)
-   essid          WiFi access point name (string)
+   ssid           WiFi access point name (string)
    channel        WiFi channel (integer)
-   hidden         Whether ESSID is hidden (boolean)
+   hidden         Whether SSID is hidden (boolean)
-   authmode       Authentication mode supported (enumeration, see module constants)
+   security       Security protocol supported (enumeration, see module constants)
-   password       Access password (string)
+   key            Access key (string)
    dhcp_hostname  The DHCP hostname to use
    reconnects     Number of reconnect attempts to make (integer, 0=none, -1=unlimited)
    txpower        Maximum transmit power in dBm (integer or float)

docs/library/network.rst

@@ -89,7 +89,7 @@ parameter should be `id`.
        network media, there are different variants of predefined/
        recommended tuple formats, among them:
 
-       * WiFi: (ssid, bssid, channel, RSSI, authmode, hidden). There
+       * WiFi: (ssid, bssid, channel, RSSI, security, hidden). There
          may be further fields, specific to a particular device.
 
        The function may accept additional keyword arguments to filter scan
@@ -133,10 +133,10 @@ parameter should be `id`.
        querying, a parameter name should be quoted as a string, and only one
        parameter can be queried at a time::
 
-        # Set WiFi access point name (formally known as ESSID) and WiFi channel
+        # Set WiFi access point name (formally known as SSID) and WiFi channel
-        ap.config(essid='My AP', channel=11)
+        ap.config(ssid='My AP', channel=11)
         # Query params one by one
-        print(ap.config('essid'))
+        print(ap.config('ssid'))
         print(ap.config('channel'))
 
 Specific network class implementations