stamhal: Add definitions for MCU_SERIES_F4 and MCU_SERIES_F7
This commit is contained in:
parent
be66a9ecf6
commit
8f59bacb92
|
@ -45,8 +45,8 @@ INC += -I../lib/netutils
|
|||
INC += -I../lib/timeutils
|
||||
|
||||
CFLAGS_CORTEX_M = -mthumb -mabi=aapcs-linux -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
|
||||
CFLAGS_MCU_f4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4
|
||||
CFLAGS_MCU_f7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7
|
||||
CFLAGS_MCU_f4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4 -DMCU_SERIES_F4
|
||||
CFLAGS_MCU_f7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7 -DMCU_SERIES_F7
|
||||
|
||||
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -ansi -std=gnu99 -nostdlib $(CFLAGS_MOD)
|
||||
CFLAGS += $(CFLAGS_MCU_$(MCU_SERIES))
|
||||
|
|
|
@ -188,7 +188,7 @@ void extint_enable(uint line) {
|
|||
if (line >= EXTI_NUM_VECTORS) {
|
||||
return;
|
||||
}
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
// The Cortex-M7 doesn't have bitband support.
|
||||
mp_uint_t irq_state = disable_irq();
|
||||
if (pyb_extint_mode[line] == EXTI_Mode_Interrupt) {
|
||||
|
@ -210,7 +210,7 @@ void extint_disable(uint line) {
|
|||
return;
|
||||
}
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
// The Cortex-M7 doesn't have bitband support.
|
||||
mp_uint_t irq_state = disable_irq();
|
||||
EXTI->IMR &= ~(1 << line);
|
||||
|
|
|
@ -36,7 +36,7 @@
|
|||
#define EXTI_USB_OTG_HS_WAKEUP (20)
|
||||
#define EXTI_RTC_TIMESTAMP (21)
|
||||
#define EXTI_RTC_WAKEUP (22)
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
#define EXTI_LPTIM1_ASYNC_EVENT (23)
|
||||
#endif
|
||||
|
||||
|
|
|
@ -28,13 +28,11 @@
|
|||
|
||||
#include "flash.h"
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
|
||||
// FLASH_FLAG_PGSERR (Programming Sequence Error) was renamed to
|
||||
// FLASH_FLAG_ERSERR (Erasing Sequence Error) in STM32F7
|
||||
#define FLASH_FLAG_PGSERR FLASH_FLAG_ERSERR
|
||||
#endif
|
||||
|
||||
#if defined(STM32F7)
|
||||
|
||||
/* Base address of the Flash sectors */
|
||||
#define ADDR_FLASH_SECTOR_0 ((uint32_t)0x08000000) /* Base @ of Sector 0, 32 Kbytes */
|
||||
|
@ -68,7 +66,7 @@
|
|||
#define ADDR_FLASH_END ((uint32_t)0x08100000) /* 1 Mbytes total */
|
||||
#endif
|
||||
|
||||
#endif
|
||||
#endif // MCU_SERIES_F7
|
||||
|
||||
static const uint32_t flash_info_table[26] = {
|
||||
ADDR_FLASH_SECTOR_0, FLASH_SECTOR_0,
|
||||
|
|
|
@ -74,7 +74,7 @@ STATIC NORETURN mp_obj_t pyb_bootloader(void) {
|
|||
HAL_RCC_DeInit();
|
||||
HAL_DeInit();
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
// arm-none-eabi-gcc 4.9.0 does not correctly inline this
|
||||
// MSP function, so we write it out explicitly here.
|
||||
//__set_MSP(*((uint32_t*) 0x1FF00000));
|
||||
|
@ -462,7 +462,7 @@ MP_DEFINE_CONST_FUN_OBJ_0(pyb_stop_obj, pyb_stop);
|
|||
|
||||
/// \function standby()
|
||||
STATIC mp_obj_t pyb_standby(void) {
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
printf("pyb.standby not supported yet\n");
|
||||
#else
|
||||
// We need to clear the PWR wake-up-flag before entering standby, since
|
||||
|
|
|
@ -135,7 +135,7 @@ extern const struct _mp_obj_module_t mp_module_network;
|
|||
{ MP_OBJ_NEW_QSTR(MP_QSTR_pyb), (mp_obj_t)&pyb_module }, \
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_stm), (mp_obj_t)&stm_module }, \
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
#define PYB_EXTI_NUM_VECTORS (24)
|
||||
#else
|
||||
#define PYB_EXTI_NUM_VECTORS (23)
|
||||
|
|
|
@ -3,7 +3,7 @@
|
|||
|
||||
// Basic GPIO functions
|
||||
#define GPIO_read_pin(gpio, pin) (((gpio)->IDR >> (pin)) & 1)
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
#define GPIO_set_pin(gpio, pin_mask) (((gpio)->BSRR) = (pin_mask))
|
||||
#define GPIO_clear_pin(gpio, pin_mask) (((gpio)->BSRR) = ((pin_mask) << 16))
|
||||
#else
|
||||
|
|
|
@ -44,7 +44,7 @@
|
|||
*/
|
||||
|
||||
.syntax unified
|
||||
#if STM32F7
|
||||
#if defined(MCU_SERIES_M7)
|
||||
.cpu cortex-m7
|
||||
#else
|
||||
.cpu cortex-m4
|
||||
|
@ -211,7 +211,7 @@ g_pfnVectors:
|
|||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
.word FMC_IRQHandler /* FMC */
|
||||
.word SDMMC1_IRQHandler /* SDMMC1 */
|
||||
#else
|
||||
|
@ -251,7 +251,7 @@ g_pfnVectors:
|
|||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
.word FPU_IRQHandler /* FPU */
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
.word UART7_IRQHandler /* UART7 */
|
||||
.word UART8_IRQHandler /* UART8 */
|
||||
.word SPI4_IRQHandler /* SPI4 */
|
||||
|
@ -448,7 +448,7 @@ g_pfnVectors:
|
|||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
.weak FMC_IRQHandler
|
||||
.thumb_set FMC_IRQHandler,Default_Handler
|
||||
|
||||
|
@ -554,7 +554,7 @@ g_pfnVectors:
|
|||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
.weak UART7_IRQHandler
|
||||
.thumb_set UART7_IRQHandler,Default_Handler
|
||||
|
||||
|
|
|
@ -283,7 +283,7 @@ void SystemClock_Config(void)
|
|||
__fatal_error("HAL_RCC_OscConfig");
|
||||
}
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
/* Activate the OverDrive to reach the 200 MHz Frequency */
|
||||
if (HAL_PWREx_EnableOverDrive() != HAL_OK)
|
||||
{
|
||||
|
@ -308,7 +308,7 @@ void SystemClock_Config(void)
|
|||
__fatal_error("HAL_RCC_ClockConfig");
|
||||
}
|
||||
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
// The DFU bootloader changes the clocksource register from its default power
|
||||
// on reset value, so we set it back here, so the clocksources are the same
|
||||
// whether we were started from DFU or from a power on reset.
|
||||
|
|
|
@ -36,7 +36,7 @@
|
|||
#include "pybioctl.h"
|
||||
#include MICROPY_HAL_H
|
||||
|
||||
//TODO: Add UART7/8 support for STM32F7
|
||||
//TODO: Add UART7/8 support for MCU_SERIES_F7
|
||||
|
||||
/// \moduleref pyb
|
||||
/// \class UART - duplex serial communication bus
|
||||
|
@ -316,7 +316,7 @@ int uart_rx_char(pyb_uart_obj_t *self) {
|
|||
return data;
|
||||
} else {
|
||||
// no buffering
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
return self->uart.Instance->RDR & self->char_mask;
|
||||
#else
|
||||
return self->uart.Instance->DR & self->char_mask;
|
||||
|
@ -354,7 +354,7 @@ void uart_irq_handler(mp_uint_t uart_id) {
|
|||
}
|
||||
|
||||
if (__HAL_UART_GET_FLAG(&self->uart, UART_FLAG_RXNE) != RESET) {
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
int data = self->uart.Instance->RDR; // clears UART_FLAG_RXNE
|
||||
#else
|
||||
int data = self->uart.Instance->DR; // clears UART_FLAG_RXNE
|
||||
|
@ -714,7 +714,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_uart_readchar_obj, pyb_uart_readchar);
|
|||
// uart.sendbreak()
|
||||
STATIC mp_obj_t pyb_uart_sendbreak(mp_obj_t self_in) {
|
||||
pyb_uart_obj_t *self = self_in;
|
||||
#if defined(STM32F7)
|
||||
#if defined(MCU_SERIES_F7)
|
||||
self->uart.Instance->RQR = USART_RQR_SBKRQ; // write-only register
|
||||
#else
|
||||
self->uart.Instance->CR1 |= USART_CR1_SBK;
|
||||
|
|
Loading…
Reference in New Issue