ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.
For consistency with other board-level config macros that begin with MICROPY_HW_USB. Also allow boards in the mimxrt, nrf and samd ports to configure these values. Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
parent
45f9a38451
commit
96c6b8cae3
|
@ -26,8 +26,10 @@
|
||||||
|
|
||||||
#include "tusb.h"
|
#include "tusb.h"
|
||||||
|
|
||||||
#define USBD_VID (0xf055)
|
#ifndef MICROPY_HW_USB_VID
|
||||||
#define USBD_PID (0x9802)
|
#define MICROPY_HW_USB_VID (0xf055)
|
||||||
|
#define MICROPY_HW_USB_PID (0x9802)
|
||||||
|
#endif
|
||||||
|
|
||||||
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
||||||
#define USBD_MAX_POWER_MA (250)
|
#define USBD_MAX_POWER_MA (250)
|
||||||
|
@ -57,8 +59,8 @@ static const tusb_desc_device_t usbd_desc_device = {
|
||||||
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
||||||
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
||||||
.bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
|
.bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
|
||||||
.idVendor = USBD_VID,
|
.idVendor = MICROPY_HW_USB_VID,
|
||||||
.idProduct = USBD_PID,
|
.idProduct = MICROPY_HW_USB_PID,
|
||||||
.bcdDevice = 0x0100,
|
.bcdDevice = 0x0100,
|
||||||
.iManufacturer = USBD_STR_MANUF,
|
.iManufacturer = USBD_STR_MANUF,
|
||||||
.iProduct = USBD_STR_PRODUCT,
|
.iProduct = USBD_STR_PRODUCT,
|
||||||
|
|
|
@ -26,8 +26,10 @@
|
||||||
|
|
||||||
#include "tusb.h"
|
#include "tusb.h"
|
||||||
|
|
||||||
#define USBD_VID (0xf055)
|
#ifndef MICROPY_HW_USB_VID
|
||||||
#define USBD_PID (0x9802)
|
#define MICROPY_HW_USB_VID (0xf055)
|
||||||
|
#define MICROPY_HW_USB_PID (0x9802)
|
||||||
|
#endif
|
||||||
|
|
||||||
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
||||||
#define USBD_MAX_POWER_MA (250)
|
#define USBD_MAX_POWER_MA (250)
|
||||||
|
@ -57,8 +59,8 @@ static const tusb_desc_device_t usbd_desc_device = {
|
||||||
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
||||||
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
||||||
.bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
|
.bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
|
||||||
.idVendor = USBD_VID,
|
.idVendor = MICROPY_HW_USB_VID,
|
||||||
.idProduct = USBD_PID,
|
.idProduct = MICROPY_HW_USB_PID,
|
||||||
.bcdDevice = 0x0100,
|
.bcdDevice = 0x0100,
|
||||||
.iManufacturer = USBD_STR_MANUF,
|
.iManufacturer = USBD_STR_MANUF,
|
||||||
.iProduct = USBD_STR_PRODUCT,
|
.iProduct = USBD_STR_PRODUCT,
|
||||||
|
|
|
@ -27,8 +27,10 @@
|
||||||
#include "samd_soc.h"
|
#include "samd_soc.h"
|
||||||
#include "tusb.h"
|
#include "tusb.h"
|
||||||
|
|
||||||
#define USBD_VID (0xf055)
|
#ifndef MICROPY_HW_USB_VID
|
||||||
#define USBD_PID (0x9802)
|
#define MICROPY_HW_USB_VID (0xf055)
|
||||||
|
#define MICROPY_HW_USB_PID (0x9802)
|
||||||
|
#endif
|
||||||
|
|
||||||
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
||||||
#define USBD_MAX_POWER_MA (250)
|
#define USBD_MAX_POWER_MA (250)
|
||||||
|
@ -58,8 +60,8 @@ static const tusb_desc_device_t usbd_desc_device = {
|
||||||
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
||||||
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
||||||
.bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
|
.bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
|
||||||
.idVendor = USBD_VID,
|
.idVendor = MICROPY_HW_USB_VID,
|
||||||
.idProduct = USBD_PID,
|
.idProduct = MICROPY_HW_USB_PID,
|
||||||
.bcdDevice = 0x0100,
|
.bcdDevice = 0x0100,
|
||||||
.iManufacturer = USBD_STR_MANUF,
|
.iManufacturer = USBD_STR_MANUF,
|
||||||
.iProduct = USBD_STR_PRODUCT,
|
.iProduct = USBD_STR_PRODUCT,
|
||||||
|
|
|
@ -725,7 +725,7 @@ GEN_PINS_AF_PY = $(BUILD)/pins_af.py
|
||||||
INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
|
INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
|
||||||
FILE2H = $(TOP)/tools/file2h.py
|
FILE2H = $(TOP)/tools/file2h.py
|
||||||
|
|
||||||
USB_IDS_FILE = usb.h
|
USB_IDS_FILE = mpconfigboard_common.h
|
||||||
CDCINF_TEMPLATE = pybcdc.inf_template
|
CDCINF_TEMPLATE = pybcdc.inf_template
|
||||||
GEN_CDCINF_FILE = $(HEADER_BUILD)/pybcdc.inf
|
GEN_CDCINF_FILE = $(HEADER_BUILD)/pybcdc.inf
|
||||||
GEN_CDCINF_HEADER = $(HEADER_BUILD)/pybcdc_inf.h
|
GEN_CDCINF_HEADER = $(HEADER_BUILD)/pybcdc_inf.h
|
||||||
|
|
|
@ -582,13 +582,13 @@ soft_reset:
|
||||||
// init USB device to default setting if it was not already configured
|
// init USB device to default setting if it was not already configured
|
||||||
if (!(pyb_usb_flags & PYB_USB_FLAG_USB_MODE_CALLED)) {
|
if (!(pyb_usb_flags & PYB_USB_FLAG_USB_MODE_CALLED)) {
|
||||||
#if MICROPY_HW_USB_MSC
|
#if MICROPY_HW_USB_MSC
|
||||||
const uint16_t pid = USBD_PID_CDC_MSC;
|
const uint16_t pid = MICROPY_HW_USB_PID_CDC_MSC;
|
||||||
const uint8_t mode = USBD_MODE_CDC_MSC;
|
const uint8_t mode = USBD_MODE_CDC_MSC;
|
||||||
#else
|
#else
|
||||||
const uint16_t pid = USBD_PID_CDC;
|
const uint16_t pid = MICROPY_HW_USB_PID_CDC;
|
||||||
const uint8_t mode = USBD_MODE_CDC;
|
const uint8_t mode = USBD_MODE_CDC;
|
||||||
#endif
|
#endif
|
||||||
pyb_usb_dev_init(pyb_usb_dev_detect(), USBD_VID, pid, mode, 0, NULL, NULL);
|
pyb_usb_dev_init(pyb_usb_dev_detect(), MICROPY_HW_USB_VID, pid, mode, 0, NULL, NULL);
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
|
@ -177,6 +177,33 @@
|
||||||
#define MICROPY_HW_UART_IS_RESERVED(uart_id) (false)
|
#define MICROPY_HW_UART_IS_RESERVED(uart_id) (false)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************/
|
||||||
|
// USB configuration
|
||||||
|
|
||||||
|
// The USBD_xxx VID/PID macros have been renamed to MICROPY_HW_USB_xxx.
|
||||||
|
#ifdef USBD_VID
|
||||||
|
#error "Old USBD_VID configuration option used"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Default VID and PID values to use for the USB device. If MICROPY_HW_USB_VID
|
||||||
|
// is defined by a board then all needed PID options must also be defined. The
|
||||||
|
// VID and PID can also be set dynamically in pyb.usb_mode().
|
||||||
|
// Windows needs a different PID to distinguish different device configurations.
|
||||||
|
#ifndef MICROPY_HW_USB_VID
|
||||||
|
#define MICROPY_HW_USB_VID (0xf055)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC_MSC (0x9800)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC_HID (0x9801)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC (0x9802)
|
||||||
|
#define MICROPY_HW_USB_PID_MSC (0x9803)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC2_MSC (0x9804)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC2 (0x9805)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC3 (0x9806)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC3_MSC (0x9807)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC_MSC_HID (0x9808)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC2_MSC_HID (0x9809)
|
||||||
|
#define MICROPY_HW_USB_PID_CDC3_MSC_HID (0x980a)
|
||||||
|
#endif
|
||||||
|
|
||||||
/*****************************************************************************/
|
/*****************************************************************************/
|
||||||
// General configuration
|
// General configuration
|
||||||
|
|
||||||
|
|
|
@ -412,7 +412,7 @@ STATIC mp_obj_t pyb_usb_mode(size_t n_args, const mp_obj_t *pos_args, mp_map_t *
|
||||||
static const mp_arg_t allowed_args[] = {
|
static const mp_arg_t allowed_args[] = {
|
||||||
{ MP_QSTR_mode, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_NONE} },
|
{ MP_QSTR_mode, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_NONE} },
|
||||||
{ MP_QSTR_port, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
|
{ MP_QSTR_port, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
|
||||||
{ MP_QSTR_vid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = USBD_VID} },
|
{ MP_QSTR_vid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = MICROPY_HW_USB_VID} },
|
||||||
{ MP_QSTR_pid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
|
{ MP_QSTR_pid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
|
||||||
#if MICROPY_HW_USB_MSC
|
#if MICROPY_HW_USB_MSC
|
||||||
{ MP_QSTR_msc, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_PTR(&mp_const_empty_tuple_obj)} },
|
{ MP_QSTR_msc, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_PTR(&mp_const_empty_tuple_obj)} },
|
||||||
|
@ -489,61 +489,61 @@ STATIC mp_obj_t pyb_usb_mode(size_t n_args, const mp_obj_t *pos_args, mp_map_t *
|
||||||
uint8_t mode;
|
uint8_t mode;
|
||||||
if (strcmp(mode_str, "CDC+MSC") == 0 || strcmp(mode_str, "VCP+MSC") == 0) {
|
if (strcmp(mode_str, "CDC+MSC") == 0 || strcmp(mode_str, "VCP+MSC") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC_MSC;
|
pid = MICROPY_HW_USB_PID_CDC_MSC;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC_MSC;
|
mode = USBD_MODE_CDC_MSC;
|
||||||
} else if (strcmp(mode_str, "VCP+MSC+HID") == 0) {
|
} else if (strcmp(mode_str, "VCP+MSC+HID") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC_MSC_HID;
|
pid = MICROPY_HW_USB_PID_CDC_MSC_HID;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC_MSC_HID;
|
mode = USBD_MODE_CDC_MSC_HID;
|
||||||
#if MICROPY_HW_USB_CDC_NUM >= 2
|
#if MICROPY_HW_USB_CDC_NUM >= 2
|
||||||
} else if (strcmp(mode_str, "VCP+VCP") == 0) {
|
} else if (strcmp(mode_str, "VCP+VCP") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC2;
|
pid = MICROPY_HW_USB_PID_CDC2;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC2;
|
mode = USBD_MODE_CDC2;
|
||||||
} else if (strcmp(mode_str, "VCP+VCP+MSC") == 0) {
|
} else if (strcmp(mode_str, "VCP+VCP+MSC") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC2_MSC;
|
pid = MICROPY_HW_USB_PID_CDC2_MSC;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC2_MSC;
|
mode = USBD_MODE_CDC2_MSC;
|
||||||
} else if (strcmp(mode_str, "2xVCP+MSC+HID") == 0) {
|
} else if (strcmp(mode_str, "2xVCP+MSC+HID") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC2_MSC_HID;
|
pid = MICROPY_HW_USB_PID_CDC2_MSC_HID;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC2_MSC_HID;
|
mode = USBD_MODE_CDC2_MSC_HID;
|
||||||
#endif
|
#endif
|
||||||
#if MICROPY_HW_USB_CDC_NUM >= 3
|
#if MICROPY_HW_USB_CDC_NUM >= 3
|
||||||
} else if (strcmp(mode_str, "3xVCP") == 0) {
|
} else if (strcmp(mode_str, "3xVCP") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC3;
|
pid = MICROPY_HW_USB_PID_CDC3;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC3;
|
mode = USBD_MODE_CDC3;
|
||||||
} else if (strcmp(mode_str, "3xVCP+MSC") == 0) {
|
} else if (strcmp(mode_str, "3xVCP+MSC") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC3_MSC;
|
pid = MICROPY_HW_USB_PID_CDC3_MSC;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC3_MSC;
|
mode = USBD_MODE_CDC3_MSC;
|
||||||
} else if (strcmp(mode_str, "3xVCP+MSC+HID") == 0) {
|
} else if (strcmp(mode_str, "3xVCP+MSC+HID") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC3_MSC_HID;
|
pid = MICROPY_HW_USB_PID_CDC3_MSC_HID;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC3_MSC_HID;
|
mode = USBD_MODE_CDC3_MSC_HID;
|
||||||
#endif
|
#endif
|
||||||
} else if (strcmp(mode_str, "CDC+HID") == 0 || strcmp(mode_str, "VCP+HID") == 0) {
|
} else if (strcmp(mode_str, "CDC+HID") == 0 || strcmp(mode_str, "VCP+HID") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC_HID;
|
pid = MICROPY_HW_USB_PID_CDC_HID;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC_HID;
|
mode = USBD_MODE_CDC_HID;
|
||||||
} else if (strcmp(mode_str, "CDC") == 0 || strcmp(mode_str, "VCP") == 0) {
|
} else if (strcmp(mode_str, "CDC") == 0 || strcmp(mode_str, "VCP") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_CDC;
|
pid = MICROPY_HW_USB_PID_CDC;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_CDC;
|
mode = USBD_MODE_CDC;
|
||||||
} else if (strcmp(mode_str, "MSC") == 0) {
|
} else if (strcmp(mode_str, "MSC") == 0) {
|
||||||
if (pid == -1) {
|
if (pid == -1) {
|
||||||
pid = USBD_PID_MSC;
|
pid = MICROPY_HW_USB_PID_MSC;
|
||||||
}
|
}
|
||||||
mode = USBD_MODE_MSC;
|
mode = USBD_MODE_MSC;
|
||||||
} else {
|
} else {
|
||||||
|
|
|
@ -30,22 +30,6 @@
|
||||||
|
|
||||||
#define PYB_USB_FLAG_USB_MODE_CALLED (0x0002)
|
#define PYB_USB_FLAG_USB_MODE_CALLED (0x0002)
|
||||||
|
|
||||||
#ifndef USBD_VID
|
|
||||||
// Windows needs a different PID to distinguish different device configurations
|
|
||||||
#define USBD_VID (0xf055)
|
|
||||||
#define USBD_PID_CDC_MSC (0x9800)
|
|
||||||
#define USBD_PID_CDC_HID (0x9801)
|
|
||||||
#define USBD_PID_CDC (0x9802)
|
|
||||||
#define USBD_PID_MSC (0x9803)
|
|
||||||
#define USBD_PID_CDC2_MSC (0x9804)
|
|
||||||
#define USBD_PID_CDC2 (0x9805)
|
|
||||||
#define USBD_PID_CDC3 (0x9806)
|
|
||||||
#define USBD_PID_CDC3_MSC (0x9807)
|
|
||||||
#define USBD_PID_CDC_MSC_HID (0x9808)
|
|
||||||
#define USBD_PID_CDC2_MSC_HID (0x9809)
|
|
||||||
#define USBD_PID_CDC3_MSC_HID (0x980a)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
typedef enum {
|
typedef enum {
|
||||||
PYB_USB_STORAGE_MEDIUM_NONE = 0,
|
PYB_USB_STORAGE_MEDIUM_NONE = 0,
|
||||||
PYB_USB_STORAGE_MEDIUM_FLASH,
|
PYB_USB_STORAGE_MEDIUM_FLASH,
|
||||||
|
|
|
@ -8,6 +8,7 @@ import sys
|
||||||
import re
|
import re
|
||||||
import string
|
import string
|
||||||
|
|
||||||
|
config_prefix = "MICROPY_HW_USB_"
|
||||||
needed_keys = ("USB_PID_CDC_MSC", "USB_PID_CDC_HID", "USB_PID_CDC", "USB_VID")
|
needed_keys = ("USB_PID_CDC_MSC", "USB_PID_CDC_HID", "USB_PID_CDC", "USB_VID")
|
||||||
|
|
||||||
|
|
||||||
|
@ -16,10 +17,10 @@ def parse_usb_ids(filename):
|
||||||
for line in open(filename).readlines():
|
for line in open(filename).readlines():
|
||||||
line = line.rstrip("\r\n")
|
line = line.rstrip("\r\n")
|
||||||
match = re.match("^#define\s+(\w+)\s+\(0x([0-9A-Fa-f]+)\)$", line)
|
match = re.match("^#define\s+(\w+)\s+\(0x([0-9A-Fa-f]+)\)$", line)
|
||||||
if match and match.group(1).startswith("USBD_"):
|
if match and match.group(1).startswith(config_prefix):
|
||||||
key = match.group(1).replace("USBD", "USB")
|
key = match.group(1).replace(config_prefix, "USB_")
|
||||||
val = match.group(2)
|
val = match.group(2)
|
||||||
print("key =", key, "val =", val)
|
# print("key =", key, "val =", val)
|
||||||
if key in needed_keys:
|
if key in needed_keys:
|
||||||
rv[key] = val
|
rv[key] = val
|
||||||
for k in needed_keys:
|
for k in needed_keys:
|
||||||
|
|
Loading…
Reference in New Issue