mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

docs/wipy: Correct deep sleep current figure.

This commit is contained in:
daniel 2016-10-10 14:22:39 +02:00
parent 5a699a7017
commit a181340ad8
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/wipy/general.rst
View File

@ -14,18 +14,18 @@ all divisions must be performed using '//' instead of '/'. Example::
Before applying power
---------------------
.. warning::
.. warning::
The GPIO pins of the WiPy are NOT 5V tolerant, connecting them to voltages higher
than 3.6V will cause irreparable damage to the board. ADC pins, when configured
than 3.6V will cause irreparable damage to the board. ADC pins, when configured
in analog mode cannot withstand voltages above 1.8V. Keep these considerations in
mind when wiring your electronics.
WLAN default behaviour
----------------------
When the WiPy boots with the default factory configuration starts in Access Point
mode with ``ssid`` that starts with: ``wipy-wlan`` and ``key: www.wipy.io``.
When the WiPy boots with the default factory configuration starts in Access Point
mode with ``ssid`` that starts with: ``wipy-wlan`` and ``key: www.wipy.io``.
Connect to this network and the WiPy will be reachable at ``192.168.1.1``. In order
to gain access to the interactive prompt, open a telnet session to that IP address on
the default port (23). You will be asked for credentials:
@ -98,7 +98,7 @@ the WiPy by pressing the switch on the board, or by typing::
>>> import machine
>>> machine.reset()
Software updates can be found in: https://github.com/wipy/wipy/releases (**Binaries.zip**).
Software updates can be found in: https://github.com/wipy/wipy/releases (**Binaries.zip**).
It's always recommended to update to the latest software, but make sure to
read the **release notes** before.
@ -122,7 +122,7 @@ Boot modes and safe boot
------------------------
If you power up normally, or press the reset button, the WiPy will boot
into standard mode; the ``boot.py`` file will be executed first, then
into standard mode; the ``boot.py`` file will be executed first, then
``main.py`` will run.
You can override this boot sequence by pulling ``GP28`` **up** (connect
@ -178,4 +178,4 @@ Details on sleep modes
configuration required.
* ``machine.sleep()``: 950uA (in WLAN STA mode). Wake sources are ``Pin``, ``RTC``
and ``WLAN``
* ``machine.deepsleep()``: ~5uA. Wake sources are ``Pin`` and ``RTC``.
* ``machine.deepsleep()``: ~350uA. Wake sources are ``Pin`` and ``RTC``.