stm32/usbdev: Convert files to unix line endings.

Also remove trailing whitespace and convert tabs to spaces.
This commit is contained in:
Damien George 2018-05-11 23:03:52 +10:00
parent 56a273ebff
commit abde0fa226
13 changed files with 4029 additions and 4029 deletions

View File

@ -1,151 +1,151 @@
/**
******************************************************************************
* @file usbd_msc_bot.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header for the usbd_msc_bot.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#include "usbd_core.h"
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_BOT_H
#define __USBD_MSC_BOT_H
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_BOT
* @brief This file is the Header file for usbd_bot.c
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
#define USBD_BOT_IDLE 0 /* Idle state */
#define USBD_BOT_DATA_OUT 1 /* Data Out state */
#define USBD_BOT_DATA_IN 2 /* Data In state */
#define USBD_BOT_LAST_DATA_IN 3 /* Last Data In Last */
#define USBD_BOT_SEND_DATA 4 /* Send Immediate data */
#define USBD_BOT_NO_DATA 5 /* No data Stage */
#define USBD_BOT_CBW_SIGNATURE 0x43425355
#define USBD_BOT_CSW_SIGNATURE 0x53425355
#define USBD_BOT_CBW_LENGTH 31
#define USBD_BOT_CSW_LENGTH 13
#define USBD_BOT_MAX_DATA 256
/* CSW Status Definitions */
#define USBD_CSW_CMD_PASSED 0x00
#define USBD_CSW_CMD_FAILED 0x01
#define USBD_CSW_PHASE_ERROR 0x02
/* BOT Status */
#define USBD_BOT_STATUS_NORMAL 0
#define USBD_BOT_STATUS_RECOVERY 1
#define USBD_BOT_STATUS_ERROR 2
#define USBD_DIR_IN 0
#define USBD_DIR_OUT 1
#define USBD_BOTH_DIR 2
/**
* @}
*/
/** @defgroup MSC_CORE_Private_TypesDefinitions
* @{
*/
typedef struct
{
uint32_t dSignature;
uint32_t dTag;
uint32_t dDataLength;
uint8_t bmFlags;
uint8_t bLUN;
uint8_t bCBLength;
uint8_t CB[16];
uint8_t ReservedForAlign;
}
USBD_MSC_BOT_CBWTypeDef;
typedef struct
{
uint32_t dSignature;
uint32_t dTag;
uint32_t dDataResidue;
uint8_t bStatus;
uint8_t ReservedForAlign[3];
}
USBD_MSC_BOT_CSWTypeDef;
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototypes
* @{
*/
void MSC_BOT_Init (USBD_HandleTypeDef *pdev);
void MSC_BOT_Reset (USBD_HandleTypeDef *pdev);
void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev);
void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
uint8_t epnum);
void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
uint8_t epnum);
void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
uint8_t CSW_Status);
void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev,
uint8_t epnum);
/**
* @}
*/
#endif /* __USBD_MSC_BOT_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_msc_bot.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header for the usbd_msc_bot.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#include "usbd_core.h"
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_BOT_H
#define __USBD_MSC_BOT_H
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_BOT
* @brief This file is the Header file for usbd_bot.c
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
#define USBD_BOT_IDLE 0 /* Idle state */
#define USBD_BOT_DATA_OUT 1 /* Data Out state */
#define USBD_BOT_DATA_IN 2 /* Data In state */
#define USBD_BOT_LAST_DATA_IN 3 /* Last Data In Last */
#define USBD_BOT_SEND_DATA 4 /* Send Immediate data */
#define USBD_BOT_NO_DATA 5 /* No data Stage */
#define USBD_BOT_CBW_SIGNATURE 0x43425355
#define USBD_BOT_CSW_SIGNATURE 0x53425355
#define USBD_BOT_CBW_LENGTH 31
#define USBD_BOT_CSW_LENGTH 13
#define USBD_BOT_MAX_DATA 256
/* CSW Status Definitions */
#define USBD_CSW_CMD_PASSED 0x00
#define USBD_CSW_CMD_FAILED 0x01
#define USBD_CSW_PHASE_ERROR 0x02
/* BOT Status */
#define USBD_BOT_STATUS_NORMAL 0
#define USBD_BOT_STATUS_RECOVERY 1
#define USBD_BOT_STATUS_ERROR 2
#define USBD_DIR_IN 0
#define USBD_DIR_OUT 1
#define USBD_BOTH_DIR 2
/**
* @}
*/
/** @defgroup MSC_CORE_Private_TypesDefinitions
* @{
*/
typedef struct
{
uint32_t dSignature;
uint32_t dTag;
uint32_t dDataLength;
uint8_t bmFlags;
uint8_t bLUN;
uint8_t bCBLength;
uint8_t CB[16];
uint8_t ReservedForAlign;
}
USBD_MSC_BOT_CBWTypeDef;
typedef struct
{
uint32_t dSignature;
uint32_t dTag;
uint32_t dDataResidue;
uint8_t bStatus;
uint8_t ReservedForAlign[3];
}
USBD_MSC_BOT_CSWTypeDef;
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototypes
* @{
*/
void MSC_BOT_Init (USBD_HandleTypeDef *pdev);
void MSC_BOT_Reset (USBD_HandleTypeDef *pdev);
void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev);
void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
uint8_t epnum);
void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
uint8_t epnum);
void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
uint8_t CSW_Status);
void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev,
uint8_t epnum);
/**
* @}
*/
#endif /* __USBD_MSC_BOT_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,104 +1,104 @@
/**
******************************************************************************
* @file usbd_msc_data.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header for the usbd_msc_data.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef _USBD_MSC_DATA_H_
#define _USBD_MSC_DATA_H_
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USB_INFO
* @brief general defines for the usb device library file
* @{
*/
/** @defgroup USB_INFO_Exported_Defines
* @{
*/
#define MODE_SENSE6_LEN 8
#define MODE_SENSE10_LEN 8
#define LENGTH_INQUIRY_PAGE00 7
#define LENGTH_FORMAT_CAPACITIES 20
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_Variables
* @{
*/
extern const uint8_t MSC_Page00_Inquiry_Data[];
extern const uint8_t MSC_Mode_Sense6_data[];
extern const uint8_t MSC_Mode_Sense10_data[] ;
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#endif /* _USBD_MSC_DATA_H_ */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_msc_data.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header for the usbd_msc_data.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef _USBD_MSC_DATA_H_
#define _USBD_MSC_DATA_H_
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USB_INFO
* @brief general defines for the usb device library file
* @{
*/
/** @defgroup USB_INFO_Exported_Defines
* @{
*/
#define MODE_SENSE6_LEN 8
#define MODE_SENSE10_LEN 8
#define LENGTH_INQUIRY_PAGE00 7
#define LENGTH_FORMAT_CAPACITIES 20
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_Variables
* @{
*/
extern const uint8_t MSC_Page00_Inquiry_Data[];
extern const uint8_t MSC_Mode_Sense6_data[];
extern const uint8_t MSC_Mode_Sense10_data[] ;
/**
* @}
*/
/** @defgroup USBD_INFO_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#endif /* _USBD_MSC_DATA_H_ */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,195 +1,195 @@
/**
******************************************************************************
* @file usbd_msc_scsi.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header for the usbd_msc_scsi.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_SCSI_H
#define __USBD_MSC_SCSI_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_SCSI
* @brief header file for the storage disk file
* @{
*/
/** @defgroup USBD_SCSI_Exported_Defines
* @{
*/
#define SENSE_LIST_DEEPTH 4
/* SCSI Commands */
#define SCSI_FORMAT_UNIT 0x04
#define SCSI_INQUIRY 0x12
#define SCSI_MODE_SELECT6 0x15
#define SCSI_MODE_SELECT10 0x55
#define SCSI_MODE_SENSE6 0x1A
#define SCSI_MODE_SENSE10 0x5A
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
#define SCSI_SYNCHRONIZE_CACHE10 0x35
#define SCSI_SYNCHRONIZE_CACHE16 0x91
#define SCSI_READ6 0x08
#define SCSI_READ10 0x28
#define SCSI_READ12 0xA8
#define SCSI_READ16 0x88
#define SCSI_READ_CAPACITY10 0x25
#define SCSI_READ_CAPACITY16 0x9E
#define SCSI_REQUEST_SENSE 0x03
#define SCSI_START_STOP_UNIT 0x1B
#define SCSI_TEST_UNIT_READY 0x00
#define SCSI_WRITE6 0x0A
#define SCSI_WRITE10 0x2A
#define SCSI_WRITE12 0xAA
#define SCSI_WRITE16 0x8A
#define SCSI_VERIFY10 0x2F
#define SCSI_VERIFY12 0xAF
#define SCSI_VERIFY16 0x8F
#define SCSI_SEND_DIAGNOSTIC 0x1D
#define SCSI_READ_FORMAT_CAPACITIES 0x23
#define NO_SENSE 0
#define RECOVERED_ERROR 1
#define NOT_READY 2
#define MEDIUM_ERROR 3
#define HARDWARE_ERROR 4
#define ILLEGAL_REQUEST 5
#define UNIT_ATTENTION 6
#define DATA_PROTECT 7
#define BLANK_CHECK 8
#define VENDOR_SPECIFIC 9
#define COPY_ABORTED 10
#define ABORTED_COMMAND 11
#define VOLUME_OVERFLOW 13
#define MISCOMPARE 14
#define INVALID_CDB 0x20
#define INVALID_FIELED_IN_COMMAND 0x24
#define PARAMETER_LIST_LENGTH_ERROR 0x1A
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
#define ADDRESS_OUT_OF_RANGE 0x21
#define MEDIUM_NOT_PRESENT 0x3A
#define MEDIUM_HAVE_CHANGED 0x28
#define WRITE_PROTECTED 0x27
#define UNRECOVERED_READ_ERROR 0x11
#define WRITE_FAULT 0x03
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
#define READ_CAPACITY10_DATA_LEN 0x08
#define MODE_SENSE10_DATA_LEN 0x08
#define MODE_SENSE6_DATA_LEN 0x04
#define REQUEST_SENSE_DATA_LEN 0x12
#define STANDARD_INQUIRY_DATA_LEN 0x24
#define BLKVFY 0x04
extern uint8_t Page00_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data2[];
extern uint8_t Mode_Sense6_data[];
extern uint8_t Mode_Sense10_data[];
extern uint8_t Scsi_Sense_Data[];
extern uint8_t ReadCapacity10_Data[];
extern uint8_t ReadFormatCapacity_Data [];
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_TypesDefinitions
* @{
*/
typedef struct _SENSE_ITEM {
char Skey;
union {
struct _ASCs {
char ASC;
char ASCQ;
}b;
unsigned int ASC;
char *pData;
} w;
} USBD_SCSI_SenseTypeDef;
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_FunctionsPrototype
* @{
*/
int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev,
uint8_t lun,
uint8_t *cmd);
void SCSI_SenseCode(USBD_HandleTypeDef *pdev,
uint8_t lun,
uint8_t sKey,
uint8_t ASC);
/**
* @}
*/
#endif /* __USBD_MSC_SCSI_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_msc_scsi.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header for the usbd_msc_scsi.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_SCSI_H
#define __USBD_MSC_SCSI_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_SCSI
* @brief header file for the storage disk file
* @{
*/
/** @defgroup USBD_SCSI_Exported_Defines
* @{
*/
#define SENSE_LIST_DEEPTH 4
/* SCSI Commands */
#define SCSI_FORMAT_UNIT 0x04
#define SCSI_INQUIRY 0x12
#define SCSI_MODE_SELECT6 0x15
#define SCSI_MODE_SELECT10 0x55
#define SCSI_MODE_SENSE6 0x1A
#define SCSI_MODE_SENSE10 0x5A
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
#define SCSI_SYNCHRONIZE_CACHE10 0x35
#define SCSI_SYNCHRONIZE_CACHE16 0x91
#define SCSI_READ6 0x08
#define SCSI_READ10 0x28
#define SCSI_READ12 0xA8
#define SCSI_READ16 0x88
#define SCSI_READ_CAPACITY10 0x25
#define SCSI_READ_CAPACITY16 0x9E
#define SCSI_REQUEST_SENSE 0x03
#define SCSI_START_STOP_UNIT 0x1B
#define SCSI_TEST_UNIT_READY 0x00
#define SCSI_WRITE6 0x0A
#define SCSI_WRITE10 0x2A
#define SCSI_WRITE12 0xAA
#define SCSI_WRITE16 0x8A
#define SCSI_VERIFY10 0x2F
#define SCSI_VERIFY12 0xAF
#define SCSI_VERIFY16 0x8F
#define SCSI_SEND_DIAGNOSTIC 0x1D
#define SCSI_READ_FORMAT_CAPACITIES 0x23
#define NO_SENSE 0
#define RECOVERED_ERROR 1
#define NOT_READY 2
#define MEDIUM_ERROR 3
#define HARDWARE_ERROR 4
#define ILLEGAL_REQUEST 5
#define UNIT_ATTENTION 6
#define DATA_PROTECT 7
#define BLANK_CHECK 8
#define VENDOR_SPECIFIC 9
#define COPY_ABORTED 10
#define ABORTED_COMMAND 11
#define VOLUME_OVERFLOW 13
#define MISCOMPARE 14
#define INVALID_CDB 0x20
#define INVALID_FIELED_IN_COMMAND 0x24
#define PARAMETER_LIST_LENGTH_ERROR 0x1A
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
#define ADDRESS_OUT_OF_RANGE 0x21
#define MEDIUM_NOT_PRESENT 0x3A
#define MEDIUM_HAVE_CHANGED 0x28
#define WRITE_PROTECTED 0x27
#define UNRECOVERED_READ_ERROR 0x11
#define WRITE_FAULT 0x03
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
#define READ_CAPACITY10_DATA_LEN 0x08
#define MODE_SENSE10_DATA_LEN 0x08
#define MODE_SENSE6_DATA_LEN 0x04
#define REQUEST_SENSE_DATA_LEN 0x12
#define STANDARD_INQUIRY_DATA_LEN 0x24
#define BLKVFY 0x04
extern uint8_t Page00_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data2[];
extern uint8_t Mode_Sense6_data[];
extern uint8_t Mode_Sense10_data[];
extern uint8_t Scsi_Sense_Data[];
extern uint8_t ReadCapacity10_Data[];
extern uint8_t ReadFormatCapacity_Data [];
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_TypesDefinitions
* @{
*/
typedef struct _SENSE_ITEM {
char Skey;
union {
struct _ASCs {
char ASC;
char ASCQ;
}b;
unsigned int ASC;
char *pData;
} w;
} USBD_SCSI_SenseTypeDef;
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_FunctionsPrototype
* @{
*/
int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev,
uint8_t lun,
uint8_t *cmd);
void SCSI_SenseCode(USBD_HandleTypeDef *pdev,
uint8_t lun,
uint8_t sKey,
uint8_t ASC);
/**
* @}
*/
#endif /* __USBD_MSC_SCSI_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,407 +1,407 @@
/**
******************************************************************************
* @file usbd_msc_bot.c
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief This file provides all the BOT protocol core functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc_bot.h"
#include "usbd_msc_scsi.h"
#include "usbd_cdc_msc_hid.h"
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_BOT
* @brief BOT protocol module
* @{
*/
/** @defgroup MSC_BOT_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_FunctionPrototypes
* @{
*/
static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev);
static void MSC_BOT_SendData (USBD_HandleTypeDef *pdev,
uint8_t* pbuf,
uint16_t len);
static void MSC_BOT_Abort(USBD_HandleTypeDef *pdev);
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Functions
* @{
*/
/**
* @brief MSC_BOT_Init
* Initialize the BOT Process
* @param pdev: device instance
* @retval None
*/
void MSC_BOT_Init (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->bot_state = USBD_BOT_IDLE;
hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
hmsc->scsi_sense_tail = 0;
hmsc->scsi_sense_head = 0;
hmsc->bdev_ops->Init(0);
USBD_LL_FlushEP(pdev, MSC_OUT_EP);
USBD_LL_FlushEP(pdev, MSC_IN_EP);
/* Prapare EP to Receive First BOT Cmd */
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
/**
* @brief MSC_BOT_Reset
* Reset the BOT Machine
* @param pdev: device instance
* @retval None
*/
void MSC_BOT_Reset (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->bot_state = USBD_BOT_IDLE;
hmsc->bot_status = USBD_BOT_STATUS_RECOVERY;
/* Prapare EP to Receive First BOT Cmd */
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
/**
* @brief MSC_BOT_DeInit
* Uninitialize the BOT Machine
* @param pdev: device instance
* @retval None
*/
void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->bot_state = USBD_BOT_IDLE;
}
/**
* @brief MSC_BOT_DataIn
* Handle BOT IN data stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval None
*/
void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
switch (hmsc->bot_state)
{
case USBD_BOT_DATA_IN:
if(SCSI_ProcessCmd(pdev,
hmsc->cbw.bLUN,
&hmsc->cbw.CB[0]) < 0)
{
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
}
break;
case USBD_BOT_SEND_DATA:
case USBD_BOT_LAST_DATA_IN:
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_PASSED);
break;
default:
break;
}
}
/**
* @brief MSC_BOT_DataOut
* Proccess MSC OUT data
* @param pdev: device instance
* @param epnum: endpoint index
* @retval None
*/
void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
switch (hmsc->bot_state)
{
case USBD_BOT_IDLE:
MSC_BOT_CBW_Decode(pdev);
break;
case USBD_BOT_DATA_OUT:
if(SCSI_ProcessCmd(pdev,
hmsc->cbw.bLUN,
&hmsc->cbw.CB[0]) < 0)
{
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
}
break;
default:
break;
}
}
/**
* @brief MSC_BOT_CBW_Decode
* Decode the CBW command and set the BOT state machine accordingtly
* @param pdev: device instance
* @retval None
*/
static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->csw.dTag = hmsc->cbw.dTag;
hmsc->csw.dDataResidue = hmsc->cbw.dDataLength;
if ((USBD_LL_GetRxDataSize (pdev ,MSC_OUT_EP) != USBD_BOT_CBW_LENGTH) ||
(hmsc->cbw.dSignature != USBD_BOT_CBW_SIGNATURE)||
(hmsc->cbw.bLUN > 1) ||
(hmsc->cbw.bCBLength < 1) ||
(hmsc->cbw.bCBLength > 16))
{
SCSI_SenseCode(pdev,
hmsc->cbw.bLUN,
ILLEGAL_REQUEST,
INVALID_CDB);
hmsc->bot_status = USBD_BOT_STATUS_ERROR;
MSC_BOT_Abort(pdev);
}
else
{
if(SCSI_ProcessCmd(pdev,
hmsc->cbw.bLUN,
&hmsc->cbw.CB[0]) < 0)
{
if(hmsc->bot_state == USBD_BOT_NO_DATA)
{
MSC_BOT_SendCSW (pdev,
USBD_CSW_CMD_FAILED);
}
else
{
MSC_BOT_Abort(pdev);
}
}
/*Burst xfer handled internally*/
else if ((hmsc->bot_state != USBD_BOT_DATA_IN) &&
(hmsc->bot_state != USBD_BOT_DATA_OUT) &&
(hmsc->bot_state != USBD_BOT_LAST_DATA_IN))
{
if (hmsc->bot_data_length > 0)
{
MSC_BOT_SendData(pdev,
hmsc->bot_data,
hmsc->bot_data_length);
}
else if (hmsc->bot_data_length == 0)
{
MSC_BOT_SendCSW (pdev,
USBD_CSW_CMD_PASSED);
}
}
}
}
/**
* @brief MSC_BOT_SendData
* Send the requested data
* @param pdev: device instance
* @param buf: pointer to data buffer
* @param len: Data Length
* @retval None
*/
static void MSC_BOT_SendData(USBD_HandleTypeDef *pdev,
uint8_t* buf,
uint16_t len)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
len = MIN (hmsc->cbw.dDataLength, len);
hmsc->csw.dDataResidue -= len;
hmsc->csw.bStatus = USBD_CSW_CMD_PASSED;
hmsc->bot_state = USBD_BOT_SEND_DATA;
USBD_LL_Transmit (pdev, MSC_IN_EP, buf, len);
}
/**
* @brief MSC_BOT_SendCSW
* Send the Command Status Wrapper
* @param pdev: device instance
* @param status : CSW status
* @retval None
*/
void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
uint8_t CSW_Status)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->csw.dSignature = USBD_BOT_CSW_SIGNATURE;
hmsc->csw.bStatus = CSW_Status;
hmsc->bot_state = USBD_BOT_IDLE;
USBD_LL_Transmit (pdev,
MSC_IN_EP,
(uint8_t *)&hmsc->csw,
USBD_BOT_CSW_LENGTH);
/* Prapare EP to Receive next Cmd */
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
/**
* @brief MSC_BOT_Abort
* Abort the current transfer
* @param pdev: device instance
* @retval status
*/
static void MSC_BOT_Abort (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
if ((hmsc->cbw.bmFlags == 0) &&
(hmsc->cbw.dDataLength != 0) &&
(hmsc->bot_status == USBD_BOT_STATUS_NORMAL) )
{
USBD_LL_StallEP(pdev, MSC_OUT_EP );
}
USBD_LL_StallEP(pdev, MSC_IN_EP);
if(hmsc->bot_status == USBD_BOT_STATUS_ERROR)
{
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
}
/**
* @brief MSC_BOT_CplClrFeature
* Complete the clear feature request
* @param pdev: device instance
* @param epnum: endpoint index
* @retval None
*/
void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev, uint8_t epnum)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
if(hmsc->bot_status == USBD_BOT_STATUS_ERROR )/* Bad CBW Signature */
{
USBD_LL_StallEP(pdev, MSC_IN_EP);
hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
}
else if(((epnum & 0x80) == 0x80) && ( hmsc->bot_status != USBD_BOT_STATUS_RECOVERY))
{
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_msc_bot.c
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief This file provides all the BOT protocol core functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc_bot.h"
#include "usbd_msc_scsi.h"
#include "usbd_cdc_msc_hid.h"
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_BOT
* @brief BOT protocol module
* @{
*/
/** @defgroup MSC_BOT_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup MSC_BOT_Private_FunctionPrototypes
* @{
*/
static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev);
static void MSC_BOT_SendData (USBD_HandleTypeDef *pdev,
uint8_t* pbuf,
uint16_t len);
static void MSC_BOT_Abort(USBD_HandleTypeDef *pdev);
/**
* @}
*/
/** @defgroup MSC_BOT_Private_Functions
* @{
*/
/**
* @brief MSC_BOT_Init
* Initialize the BOT Process
* @param pdev: device instance
* @retval None
*/
void MSC_BOT_Init (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->bot_state = USBD_BOT_IDLE;
hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
hmsc->scsi_sense_tail = 0;
hmsc->scsi_sense_head = 0;
hmsc->bdev_ops->Init(0);
USBD_LL_FlushEP(pdev, MSC_OUT_EP);
USBD_LL_FlushEP(pdev, MSC_IN_EP);
/* Prapare EP to Receive First BOT Cmd */
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
/**
* @brief MSC_BOT_Reset
* Reset the BOT Machine
* @param pdev: device instance
* @retval None
*/
void MSC_BOT_Reset (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->bot_state = USBD_BOT_IDLE;
hmsc->bot_status = USBD_BOT_STATUS_RECOVERY;
/* Prapare EP to Receive First BOT Cmd */
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
/**
* @brief MSC_BOT_DeInit
* Uninitialize the BOT Machine
* @param pdev: device instance
* @retval None
*/
void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->bot_state = USBD_BOT_IDLE;
}
/**
* @brief MSC_BOT_DataIn
* Handle BOT IN data stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval None
*/
void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
switch (hmsc->bot_state)
{
case USBD_BOT_DATA_IN:
if(SCSI_ProcessCmd(pdev,
hmsc->cbw.bLUN,
&hmsc->cbw.CB[0]) < 0)
{
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
}
break;
case USBD_BOT_SEND_DATA:
case USBD_BOT_LAST_DATA_IN:
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_PASSED);
break;
default:
break;
}
}
/**
* @brief MSC_BOT_DataOut
* Proccess MSC OUT data
* @param pdev: device instance
* @param epnum: endpoint index
* @retval None
*/
void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
switch (hmsc->bot_state)
{
case USBD_BOT_IDLE:
MSC_BOT_CBW_Decode(pdev);
break;
case USBD_BOT_DATA_OUT:
if(SCSI_ProcessCmd(pdev,
hmsc->cbw.bLUN,
&hmsc->cbw.CB[0]) < 0)
{
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
}
break;
default:
break;
}
}
/**
* @brief MSC_BOT_CBW_Decode
* Decode the CBW command and set the BOT state machine accordingtly
* @param pdev: device instance
* @retval None
*/
static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->csw.dTag = hmsc->cbw.dTag;
hmsc->csw.dDataResidue = hmsc->cbw.dDataLength;
if ((USBD_LL_GetRxDataSize (pdev ,MSC_OUT_EP) != USBD_BOT_CBW_LENGTH) ||
(hmsc->cbw.dSignature != USBD_BOT_CBW_SIGNATURE)||
(hmsc->cbw.bLUN > 1) ||
(hmsc->cbw.bCBLength < 1) ||
(hmsc->cbw.bCBLength > 16))
{
SCSI_SenseCode(pdev,
hmsc->cbw.bLUN,
ILLEGAL_REQUEST,
INVALID_CDB);
hmsc->bot_status = USBD_BOT_STATUS_ERROR;
MSC_BOT_Abort(pdev);
}
else
{
if(SCSI_ProcessCmd(pdev,
hmsc->cbw.bLUN,
&hmsc->cbw.CB[0]) < 0)
{
if(hmsc->bot_state == USBD_BOT_NO_DATA)
{
MSC_BOT_SendCSW (pdev,
USBD_CSW_CMD_FAILED);
}
else
{
MSC_BOT_Abort(pdev);
}
}
/*Burst xfer handled internally*/
else if ((hmsc->bot_state != USBD_BOT_DATA_IN) &&
(hmsc->bot_state != USBD_BOT_DATA_OUT) &&
(hmsc->bot_state != USBD_BOT_LAST_DATA_IN))
{
if (hmsc->bot_data_length > 0)
{
MSC_BOT_SendData(pdev,
hmsc->bot_data,
hmsc->bot_data_length);
}
else if (hmsc->bot_data_length == 0)
{
MSC_BOT_SendCSW (pdev,
USBD_CSW_CMD_PASSED);
}
}
}
}
/**
* @brief MSC_BOT_SendData
* Send the requested data
* @param pdev: device instance
* @param buf: pointer to data buffer
* @param len: Data Length
* @retval None
*/
static void MSC_BOT_SendData(USBD_HandleTypeDef *pdev,
uint8_t* buf,
uint16_t len)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
len = MIN (hmsc->cbw.dDataLength, len);
hmsc->csw.dDataResidue -= len;
hmsc->csw.bStatus = USBD_CSW_CMD_PASSED;
hmsc->bot_state = USBD_BOT_SEND_DATA;
USBD_LL_Transmit (pdev, MSC_IN_EP, buf, len);
}
/**
* @brief MSC_BOT_SendCSW
* Send the Command Status Wrapper
* @param pdev: device instance
* @param status : CSW status
* @retval None
*/
void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
uint8_t CSW_Status)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
hmsc->csw.dSignature = USBD_BOT_CSW_SIGNATURE;
hmsc->csw.bStatus = CSW_Status;
hmsc->bot_state = USBD_BOT_IDLE;
USBD_LL_Transmit (pdev,
MSC_IN_EP,
(uint8_t *)&hmsc->csw,
USBD_BOT_CSW_LENGTH);
/* Prapare EP to Receive next Cmd */
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
/**
* @brief MSC_BOT_Abort
* Abort the current transfer
* @param pdev: device instance
* @retval status
*/
static void MSC_BOT_Abort (USBD_HandleTypeDef *pdev)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
if ((hmsc->cbw.bmFlags == 0) &&
(hmsc->cbw.dDataLength != 0) &&
(hmsc->bot_status == USBD_BOT_STATUS_NORMAL) )
{
USBD_LL_StallEP(pdev, MSC_OUT_EP );
}
USBD_LL_StallEP(pdev, MSC_IN_EP);
if(hmsc->bot_status == USBD_BOT_STATUS_ERROR)
{
USBD_LL_PrepareReceive (pdev,
MSC_OUT_EP,
(uint8_t *)&hmsc->cbw,
USBD_BOT_CBW_LENGTH);
}
}
/**
* @brief MSC_BOT_CplClrFeature
* Complete the clear feature request
* @param pdev: device instance
* @param epnum: endpoint index
* @retval None
*/
void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev, uint8_t epnum)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
if(hmsc->bot_status == USBD_BOT_STATUS_ERROR )/* Bad CBW Signature */
{
USBD_LL_StallEP(pdev, MSC_IN_EP);
hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
}
else if(((epnum & 0x80) == 0x80) && ( hmsc->bot_status != USBD_BOT_STATUS_RECOVERY))
{
MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,134 +1,134 @@
/**
******************************************************************************
* @file usbd_msc_data.c
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief This file provides all the vital inquiry pages and sense data.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc_data.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_DATA
* @brief Mass storage info/data module
* @{
*/
/** @defgroup MSC_DATA_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Variables
* @{
*/
/* USB Mass storage Page 0 Inquiry Data */
const uint8_t MSC_Page00_Inquiry_Data[] = {//7
0x00,
0x00,
0x00,
(LENGTH_INQUIRY_PAGE00 - 4),
0x00,
0x80,
0x83
};
/* USB Mass storage sense 6 Data */
const uint8_t MSC_Mode_Sense6_data[] = {
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00
};
/* USB Mass storage sense 10 Data */
const uint8_t MSC_Mode_Sense10_data[] = {
0x00,
0x06,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00
};
/**
* @}
*/
/** @defgroup MSC_DATA_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_msc_data.c
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief This file provides all the vital inquiry pages and sense data.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc_data.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_DATA
* @brief Mass storage info/data module
* @{
*/
/** @defgroup MSC_DATA_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Variables
* @{
*/
/* USB Mass storage Page 0 Inquiry Data */
const uint8_t MSC_Page00_Inquiry_Data[] = {//7
0x00,
0x00,
0x00,
(LENGTH_INQUIRY_PAGE00 - 4),
0x00,
0x80,
0x83
};
/* USB Mass storage sense 6 Data */
const uint8_t MSC_Mode_Sense6_data[] = {
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00
};
/* USB Mass storage sense 10 Data */
const uint8_t MSC_Mode_Sense10_data[] = {
0x00,
0x06,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00
};
/**
* @}
*/
/** @defgroup MSC_DATA_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup MSC_DATA_Private_Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

File diff suppressed because it is too large Load Diff

View File

@ -1,159 +1,159 @@
/**
******************************************************************************
* @file usbd_core.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief Header file for usbd_core.c
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CORE_H
#define __USBD_CORE_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
#include "usbd_def.h"
#include "usbd_ioreq.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief This file is the Header file for usbd_core.c file
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Variables
* @{
*/
#define USBD_SOF USBD_LL_SOF
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, const USBD_ClassTypeDef *pclass);
USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
/* USBD Low Level Driver */
USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev, int high_speed);
USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t ep_type,
uint16_t ep_mps);
USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
void USBD_LL_Delay (uint32_t Delay);
/**
* @}
*/
#endif /* __USBD_CORE_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_core.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief Header file for usbd_core.c
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CORE_H
#define __USBD_CORE_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
#include "usbd_def.h"
#include "usbd_ioreq.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief This file is the Header file for usbd_core.c file
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Variables
* @{
*/
#define USBD_SOF USBD_LL_SOF
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, const USBD_ClassTypeDef *pclass);
USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
/* USBD Low Level Driver */
USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev, int high_speed);
USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t ep_type,
uint16_t ep_mps);
USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
void USBD_LL_Delay (uint32_t Delay);
/**
* @}
*/
#endif /* __USBD_CORE_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,106 +1,106 @@
/**
******************************************************************************
* @file usbd_req.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header file for the usbd_req.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_REQUEST_H_
#define __USB_REQUEST_H_
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_REQ
* @brief header file for the usbd_ioreq.c file
* @{
*/
/** @defgroup USBD_REQ_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
/**
* @}
*/
#endif /* __USB_REQUEST_H_ */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_req.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header file for the usbd_req.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_REQUEST_H_
#define __USB_REQUEST_H_
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_REQ
* @brief header file for the usbd_ioreq.c file
* @{
*/
/** @defgroup USBD_REQ_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
/**
* @}
*/
#endif /* __USB_REQUEST_H_ */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,313 +1,313 @@
/**
******************************************************************************
* @file usbd_def.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief general defines for the usb device library
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_DEF_H
#define __USBD_DEF_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
/** @addtogroup STM32_USBD_DEVICE_LIBRARY
* @{
*/
/** @defgroup USB_DEF
* @brief general defines for the usb device library file
* @{
*/
/** @defgroup USB_DEF_Exported_Defines
* @{
*/
#ifndef NULL
#define NULL ((void *)0)
#endif
#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
#define USB_LEN_DEV_DESC 0x12
#define USB_LEN_CFG_DESC 0x09
#define USB_LEN_IF_DESC 0x09
#define USB_LEN_EP_DESC 0x07
#define USB_LEN_OTG_DESC 0x03
#define USB_LEN_LANGID_STR_DESC 0x04
#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
#define USBD_IDX_LANGID_STR 0x00
#define USBD_IDX_MFC_STR 0x01
#define USBD_IDX_PRODUCT_STR 0x02
#define USBD_IDX_SERIAL_STR 0x03
#define USBD_IDX_CONFIG_STR 0x04
#define USBD_IDX_INTERFACE_STR 0x05
#define USB_REQ_TYPE_STANDARD 0x00
#define USB_REQ_TYPE_CLASS 0x20
#define USB_REQ_TYPE_VENDOR 0x40
#define USB_REQ_TYPE_MASK 0x60
#define USB_REQ_RECIPIENT_DEVICE 0x00
#define USB_REQ_RECIPIENT_INTERFACE 0x01
#define USB_REQ_RECIPIENT_ENDPOINT 0x02
#define USB_REQ_RECIPIENT_MASK 0x03
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_DESC_TYPE_DEVICE 1
#define USB_DESC_TYPE_CONFIGURATION 2
#define USB_DESC_TYPE_STRING 3
#define USB_DESC_TYPE_INTERFACE 4
#define USB_DESC_TYPE_ENDPOINT 5
#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
#define USB_CONFIG_REMOTE_WAKEUP 2
#define USB_CONFIG_SELF_POWERED 1
#define USB_FEATURE_EP_HALT 0
#define USB_FEATURE_REMOTE_WAKEUP 1
#define USB_FEATURE_TEST_MODE 2
#define USB_HS_MAX_PACKET_SIZE 512
#define USB_FS_MAX_PACKET_SIZE 64
#define USB_MAX_EP0_SIZE 64
/* Device Status */
#define USBD_STATE_DEFAULT 1
#define USBD_STATE_ADDRESSED 2
#define USBD_STATE_CONFIGURED 3
#define USBD_STATE_SUSPENDED 4
/* EP0 State */
#define USBD_EP0_IDLE 0
#define USBD_EP0_SETUP 1
#define USBD_EP0_DATA_IN 2
#define USBD_EP0_DATA_OUT 3
#define USBD_EP0_STATUS_IN 4
#define USBD_EP0_STATUS_OUT 5
#define USBD_EP0_STALL 6
#define USBD_EP_TYPE_CTRL 0
#define USBD_EP_TYPE_ISOC 1
#define USBD_EP_TYPE_BULK 2
#define USBD_EP_TYPE_INTR 3
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_TypesDefinitions
* @{
*/
typedef struct usb_setup_req
{
uint8_t bmRequest;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
}USBD_SetupReqTypedef;
struct _USBD_HandleTypeDef;
typedef struct _Device_cb
{
uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
/* Control Endpoints*/
uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
/* Class Specific Endpoints*/
uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t *(*GetHSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetFSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetOtherSpeedConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetDeviceQualifierDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
} USBD_ClassTypeDef;
/* Following USB Device Speed */
typedef enum
{
USBD_SPEED_HIGH = 0,
USBD_SPEED_FULL = 1,
USBD_SPEED_LOW = 2,
}USBD_SpeedTypeDef;
/* Following USB Device status */
typedef enum {
USBD_OK = 0,
USBD_BUSY,
USBD_FAIL,
}USBD_StatusTypeDef;
struct _USBD_HandleTypeDef;
/* USB Device descriptors structure */
typedef struct
{
uint8_t *(*GetDeviceDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t idx, uint16_t *length);
} USBD_DescriptorsTypeDef;
/* USB Device handle structure */
typedef struct
{
uint32_t status;
uint32_t total_length;
uint32_t rem_length;
uint32_t maxpacket;
} USBD_EndpointTypeDef;
/* USB Device handle structure */
typedef struct _USBD_HandleTypeDef
{
uint8_t id;
uint32_t dev_config;
uint32_t dev_default_config;
uint32_t dev_config_status;
USBD_SpeedTypeDef dev_speed;
USBD_EndpointTypeDef ep_in[15];
USBD_EndpointTypeDef ep_out[15];
uint32_t ep0_state;
uint32_t ep0_data_len;
uint8_t dev_state;
uint8_t dev_old_state;
uint8_t dev_address;
uint8_t dev_connection_status;
uint8_t dev_test_mode;
uint32_t dev_remote_wakeup;
USBD_SetupReqTypedef request;
USBD_DescriptorsTypeDef *pDesc;
const USBD_ClassTypeDef *pClass;
void *pClassData;
void *pUserData;
void *pData;
} USBD_HandleTypeDef;
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_Macros
* @{
*/
#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
(((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#if defined ( __GNUC__ )
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* In HS mode and when the DMA is used, all variables and data structures dealing
with the DMA during the transaction process should be 4-bytes aligned */
#if defined (__GNUC__) /* GNU Compiler */
#define __ALIGN_END __attribute__ ((aligned (4)))
#define __ALIGN_BEGIN
#else
#define __ALIGN_END
#if defined (__CC_ARM) /* ARM Compiler */
#define __ALIGN_BEGIN __align(4)
#elif defined (__ICCARM__) /* IAR Compiler */
#define __ALIGN_BEGIN
#elif defined (__TASKING__) /* TASKING Compiler */
#define __ALIGN_BEGIN __align(4)
#endif /* __CC_ARM */
#endif /* __GNUC__ */
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#endif /* __USBD_DEF_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_def.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief general defines for the usb device library
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_DEF_H
#define __USBD_DEF_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
/** @addtogroup STM32_USBD_DEVICE_LIBRARY
* @{
*/
/** @defgroup USB_DEF
* @brief general defines for the usb device library file
* @{
*/
/** @defgroup USB_DEF_Exported_Defines
* @{
*/
#ifndef NULL
#define NULL ((void *)0)
#endif
#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
#define USB_LEN_DEV_DESC 0x12
#define USB_LEN_CFG_DESC 0x09
#define USB_LEN_IF_DESC 0x09
#define USB_LEN_EP_DESC 0x07
#define USB_LEN_OTG_DESC 0x03
#define USB_LEN_LANGID_STR_DESC 0x04
#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
#define USBD_IDX_LANGID_STR 0x00
#define USBD_IDX_MFC_STR 0x01
#define USBD_IDX_PRODUCT_STR 0x02
#define USBD_IDX_SERIAL_STR 0x03
#define USBD_IDX_CONFIG_STR 0x04
#define USBD_IDX_INTERFACE_STR 0x05
#define USB_REQ_TYPE_STANDARD 0x00
#define USB_REQ_TYPE_CLASS 0x20
#define USB_REQ_TYPE_VENDOR 0x40
#define USB_REQ_TYPE_MASK 0x60
#define USB_REQ_RECIPIENT_DEVICE 0x00
#define USB_REQ_RECIPIENT_INTERFACE 0x01
#define USB_REQ_RECIPIENT_ENDPOINT 0x02
#define USB_REQ_RECIPIENT_MASK 0x03
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_DESC_TYPE_DEVICE 1
#define USB_DESC_TYPE_CONFIGURATION 2
#define USB_DESC_TYPE_STRING 3
#define USB_DESC_TYPE_INTERFACE 4
#define USB_DESC_TYPE_ENDPOINT 5
#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
#define USB_CONFIG_REMOTE_WAKEUP 2
#define USB_CONFIG_SELF_POWERED 1
#define USB_FEATURE_EP_HALT 0
#define USB_FEATURE_REMOTE_WAKEUP 1
#define USB_FEATURE_TEST_MODE 2
#define USB_HS_MAX_PACKET_SIZE 512
#define USB_FS_MAX_PACKET_SIZE 64
#define USB_MAX_EP0_SIZE 64
/* Device Status */
#define USBD_STATE_DEFAULT 1
#define USBD_STATE_ADDRESSED 2
#define USBD_STATE_CONFIGURED 3
#define USBD_STATE_SUSPENDED 4
/* EP0 State */
#define USBD_EP0_IDLE 0
#define USBD_EP0_SETUP 1
#define USBD_EP0_DATA_IN 2
#define USBD_EP0_DATA_OUT 3
#define USBD_EP0_STATUS_IN 4
#define USBD_EP0_STATUS_OUT 5
#define USBD_EP0_STALL 6
#define USBD_EP_TYPE_CTRL 0
#define USBD_EP_TYPE_ISOC 1
#define USBD_EP_TYPE_BULK 2
#define USBD_EP_TYPE_INTR 3
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_TypesDefinitions
* @{
*/
typedef struct usb_setup_req
{
uint8_t bmRequest;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
}USBD_SetupReqTypedef;
struct _USBD_HandleTypeDef;
typedef struct _Device_cb
{
uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
/* Control Endpoints*/
uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
/* Class Specific Endpoints*/
uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
uint8_t *(*GetHSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetFSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetOtherSpeedConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetDeviceQualifierDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
} USBD_ClassTypeDef;
/* Following USB Device Speed */
typedef enum
{
USBD_SPEED_HIGH = 0,
USBD_SPEED_FULL = 1,
USBD_SPEED_LOW = 2,
}USBD_SpeedTypeDef;
/* Following USB Device status */
typedef enum {
USBD_OK = 0,
USBD_BUSY,
USBD_FAIL,
}USBD_StatusTypeDef;
struct _USBD_HandleTypeDef;
/* USB Device descriptors structure */
typedef struct
{
uint8_t *(*GetDeviceDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
uint8_t *(*GetStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t idx, uint16_t *length);
} USBD_DescriptorsTypeDef;
/* USB Device handle structure */
typedef struct
{
uint32_t status;
uint32_t total_length;
uint32_t rem_length;
uint32_t maxpacket;
} USBD_EndpointTypeDef;
/* USB Device handle structure */
typedef struct _USBD_HandleTypeDef
{
uint8_t id;
uint32_t dev_config;
uint32_t dev_default_config;
uint32_t dev_config_status;
USBD_SpeedTypeDef dev_speed;
USBD_EndpointTypeDef ep_in[15];
USBD_EndpointTypeDef ep_out[15];
uint32_t ep0_state;
uint32_t ep0_data_len;
uint8_t dev_state;
uint8_t dev_old_state;
uint8_t dev_address;
uint8_t dev_connection_status;
uint8_t dev_test_mode;
uint32_t dev_remote_wakeup;
USBD_SetupReqTypedef request;
USBD_DescriptorsTypeDef *pDesc;
const USBD_ClassTypeDef *pClass;
void *pClassData;
void *pUserData;
void *pData;
} USBD_HandleTypeDef;
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_Macros
* @{
*/
#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
(((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#if defined ( __GNUC__ )
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* In HS mode and when the DMA is used, all variables and data structures dealing
with the DMA during the transaction process should be 4-bytes aligned */
#if defined (__GNUC__) /* GNU Compiler */
#define __ALIGN_END __attribute__ ((aligned (4)))
#define __ALIGN_BEGIN
#else
#define __ALIGN_END
#if defined (__CC_ARM) /* ARM Compiler */
#define __ALIGN_BEGIN __align(4)
#elif defined (__ICCARM__) /* IAR Compiler */
#define __ALIGN_BEGIN
#elif defined (__TASKING__) /* TASKING Compiler */
#define __ALIGN_BEGIN __align(4)
#endif /* __CC_ARM */
#endif /* __GNUC__ */
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#endif /* __USBD_DEF_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -1,121 +1,121 @@
/**
******************************************************************************
* @file usbd_ioreq.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header file for the usbd_ioreq.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_IOREQ_H_
#define __USBD_IOREQ_H_
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
#include "usbd_core.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief header file for the usbd_ioreq.c file
* @{
*/
/** @defgroup USBD_IOREQ_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
uint8_t *buf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
uint8_t epnum);
/**
* @}
*/
#endif /* __USBD_IOREQ_H_ */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_ioreq.h
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief header file for the usbd_ioreq.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_IOREQ_H_
#define __USBD_IOREQ_H_
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
#include "usbd_core.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief header file for the usbd_ioreq.c file
* @{
*/
/** @defgroup USBD_IOREQ_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
uint8_t *buf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
uint8_t epnum);
/**
* @}
*/
#endif /* __USBD_IOREQ_H_ */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -1,236 +1,236 @@
/**
******************************************************************************
* @file usbd_ioreq.c
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief This file provides the IO requests APIs for control endpoints.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief control I/O requests module
* @{
*/
/** @defgroup USBD_IOREQ_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Functions
* @{
*/
/**
* @brief USBD_CtlSendData
* send data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_DATA_IN;
pdev->ep_in[0].total_length = len;
pdev->ep_in[0].rem_length = len;
/* Start the transfer */
USBD_LL_Transmit (pdev, 0x00, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlContinueSendData
* continue sending data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
/* Start the next transfer */
USBD_LL_Transmit (pdev, 0x00, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlPrepareRx
* receive data on the ctl pipe
* @param pdev: USB OTG device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_DATA_OUT;
pdev->ep_out[0].total_length = len;
pdev->ep_out[0].rem_length = len;
/* Start the transfer */
USBD_LL_PrepareReceive (pdev,
0,
pbuf,
len);
return USBD_OK;
}
/**
* @brief USBD_CtlContinueRx
* continue receive data on the ctl pipe
* @param pdev: USB OTG device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
USBD_LL_PrepareReceive (pdev,
0,
pbuf,
len);
return USBD_OK;
}
/**
* @brief USBD_CtlSendStatus
* send zero lzngth packet on the ctl pipe
* @param pdev: USB OTG device instance
* @retval status
*/
USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_STATUS_IN;
/* Start the transfer */
USBD_LL_Transmit (pdev, 0x00, NULL, 0);
return USBD_OK;
}
/**
* @brief USBD_CtlReceiveStatus
* receive zero lzngth packet on the ctl pipe
* @param pdev: USB OTG device instance
* @retval status
*/
USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_STATUS_OUT;
/* Start the transfer */
USBD_LL_PrepareReceive ( pdev,
0,
NULL,
0);
return USBD_OK;
}
/**
* @brief USBD_GetRxCount
* returns the received data length
* @param pdev: USB OTG device instance
* epnum: endpoint index
* @retval Rx Data blength
*/
uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
{
return USBD_LL_GetRxDataSize(pdev, ep_addr);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usbd_ioreq.c
* @author MCD Application Team
* @version V2.0.0
* @date 18-February-2014
* @brief This file provides the IO requests APIs for control endpoints.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief control I/O requests module
* @{
*/
/** @defgroup USBD_IOREQ_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Functions
* @{
*/
/**
* @brief USBD_CtlSendData
* send data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_DATA_IN;
pdev->ep_in[0].total_length = len;
pdev->ep_in[0].rem_length = len;
/* Start the transfer */
USBD_LL_Transmit (pdev, 0x00, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlContinueSendData
* continue sending data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
/* Start the next transfer */
USBD_LL_Transmit (pdev, 0x00, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlPrepareRx
* receive data on the ctl pipe
* @param pdev: USB OTG device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_DATA_OUT;
pdev->ep_out[0].total_length = len;
pdev->ep_out[0].rem_length = len;
/* Start the transfer */
USBD_LL_PrepareReceive (pdev,
0,
pbuf,
len);
return USBD_OK;
}
/**
* @brief USBD_CtlContinueRx
* continue receive data on the ctl pipe
* @param pdev: USB OTG device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len)
{
USBD_LL_PrepareReceive (pdev,
0,
pbuf,
len);
return USBD_OK;
}
/**
* @brief USBD_CtlSendStatus
* send zero lzngth packet on the ctl pipe
* @param pdev: USB OTG device instance
* @retval status
*/
USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_STATUS_IN;
/* Start the transfer */
USBD_LL_Transmit (pdev, 0x00, NULL, 0);
return USBD_OK;
}
/**
* @brief USBD_CtlReceiveStatus
* receive zero lzngth packet on the ctl pipe
* @param pdev: USB OTG device instance
* @retval status
*/
USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_STATUS_OUT;
/* Start the transfer */
USBD_LL_PrepareReceive ( pdev,
0,
NULL,
0);
return USBD_OK;
}
/**
* @brief USBD_GetRxCount
* returns the received data length
* @param pdev: USB OTG device instance
* epnum: endpoint index
* @retval Rx Data blength
*/
uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
{
return USBD_LL_GetRxDataSize(pdev, ep_addr);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/