stm32/boards/LEGO_HUB_NO6: Skip first 1MiB of SPI flash for storage.
The first 1MiB is used by the built-in bootloader and is best left as-is. Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
parent
e3eed26d0b
commit
bac791c5fd
|
@ -10,7 +10,7 @@
|
|||
#define MICROPY_HW_MCU_NAME "STM32F413"
|
||||
|
||||
#define MICROPY_HW_HAS_SWITCH (0)
|
||||
#define MICROPY_HW_HAS_FLASH (0)
|
||||
#define MICROPY_HW_HAS_FLASH (1)
|
||||
#define MICROPY_PY_PYB_LEGACY (0)
|
||||
#define MICROPY_HW_ENTER_BOOTLOADER_VIA_RESET (0)
|
||||
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
||||
|
@ -78,8 +78,12 @@
|
|||
#define MICROPY_HW_BLE_BTSTACK_CHIPSET_INSTANCE btstack_chipset_cc256x_instance()
|
||||
|
||||
// SPI flash, for R/W storage
|
||||
// The first 1MiB is skipped because it's used by the built-in bootloader
|
||||
#define MICROPY_HW_SPIFLASH_OFFSET_BYTES (1024 * 1024)
|
||||
#define MICROPY_HW_SPIFLASH_BLOCKMAP(bl) ((bl) + MICROPY_HW_SPIFLASH_OFFSET_BYTES / FLASH_BLOCK_SIZE)
|
||||
#define MICROPY_HW_SPIFLASH_BLOCKMAP_EXT(bl) ((bl) + MICROPY_HW_SPIFLASH_OFFSET_BYTES / MP_SPIFLASH_ERASE_BLOCK_SIZE)
|
||||
#define MICROPY_HW_SPIFLASH_ENABLE_CACHE (1)
|
||||
#define MICROPY_HW_SPIFLASH_SIZE_BITS (256 * 1024 * 1024)
|
||||
#define MICROPY_HW_SPIFLASH_SIZE_BITS (256 * 1024 * 1024 - MICROPY_HW_SPIFLASH_OFFSET_BYTES * 8)
|
||||
#define MICROPY_HW_SPIFLASH_CS (MICROPY_HW_SPI2_NSS)
|
||||
#define MICROPY_HW_SPIFLASH_SCK (MICROPY_HW_SPI2_SCK)
|
||||
#define MICROPY_HW_SPIFLASH_MISO (MICROPY_HW_SPI2_MISO)
|
||||
|
@ -89,15 +93,25 @@
|
|||
extern int32_t board_bdev_ioctl(void);
|
||||
extern struct _spi_bdev_t spi_bdev;
|
||||
#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \
|
||||
(op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE - 1) : \
|
||||
(op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \
|
||||
(op) == BDEV_IOCTL_INIT ? board_bdev_ioctl() : \
|
||||
spi_bdev_ioctl(&spi_bdev, (op), (arg)) \
|
||||
)
|
||||
|
||||
// Jump over first block (bl + 1) as it is cleared by bootloader
|
||||
#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl + 1), (n))
|
||||
#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl + 1), (n))
|
||||
#define MICROPY_HW_BDEV_SPIFLASH_EXTENDED (&spi_bdev) // for extended block protocol
|
||||
// Configuration for stardard block protocol (block size FLASH_BLOCK_SIZE).
|
||||
#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) \
|
||||
spi_bdev_readblocks(&spi_bdev, (dest), MICROPY_HW_SPIFLASH_BLOCKMAP(bl), (n))
|
||||
#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) \
|
||||
spi_bdev_writeblocks(&spi_bdev, (src), MICROPY_HW_SPIFLASH_BLOCKMAP(bl), (n))
|
||||
|
||||
// Configuration for extended block protocol (block size MP_SPIFLASH_ERASE_BLOCK_SIZE).
|
||||
#define MICROPY_HW_BDEV_BLOCKSIZE_EXT (MP_SPIFLASH_ERASE_BLOCK_SIZE)
|
||||
#define MICROPY_HW_BDEV_READBLOCKS_EXT(dest, bl, off, len) \
|
||||
(spi_bdev_readblocks_raw(&spi_bdev, (dest), MICROPY_HW_SPIFLASH_BLOCKMAP_EXT(bl), (off), (len)))
|
||||
#define MICROPY_HW_BDEV_WRITEBLOCKS_EXT(src, bl, off, len) \
|
||||
(spi_bdev_writeblocks_raw(&spi_bdev, (src), MICROPY_HW_SPIFLASH_BLOCKMAP_EXT(bl), (off), (len)))
|
||||
#define MICROPY_HW_BDEV_ERASEBLOCKS_EXT(bl, len) \
|
||||
(spi_bdev_eraseblocks_raw(&spi_bdev, MICROPY_HW_SPIFLASH_BLOCKMAP_EXT(bl), (len)))
|
||||
|
||||
// Board control config
|
||||
#define MICROPY_BOARD_STARTUP board_init
|
||||
|
|
Loading…
Reference in New Issue