docs: Spelling mistakes

docs/README.md

@@ -35,6 +35,6 @@ This can be achieved with:
     make MICROPY_PORT=<port_name> latexpdf
 
 but require rather complete install of LaTeX with various extensions. On
-Debiab/Ubuntu, try (500MB+ download):
+Debian/Ubuntu, try (500MB+ download):
 
     apt-get install texlive-latex-recommended texlive-latex-extra

docs/esp8266/general.rst

@@ -52,7 +52,7 @@ For your convenience, some of technical specifications are provided below:
   external FlashROM, UART, deep sleep wake-up, etc.)
 * UART: One RX/TX UART (no hardware handshaking), one TX-only UART.
 * SPI: 2 SPI interfaces (one used for FlashROM).
-* I2C: No native extenal I2C (bitbang implementation available on any pins).
+* I2C: No native external I2C (bitbang implementation available on any pins).
 * I2S: 1.
 * Programming: using BootROM bootloader from UART. Due to external FlashROM
   and always-available BootROM bootloader, ESP8266 is not brickable.

docs/esp8266/tutorial/repl.rst

@@ -36,7 +36,7 @@ WebREPL - a prompt over WiFi
 WebREPL allows you to use the Python prompt over WiFi, connecting through a
 browser. The latest versions of Firefox and Chrome are supported.
 
-For your convinience, WebREPL client is hosted at
+For your convenience, WebREPL client is hosted at
 `<http://micropython.org/webrepl>`__ . Alternatively, you can install it
 locally from the the GitHub repository
 `<https://github.com/micropython/webrepl>`__ .

docs/library/builtins.rst

@@ -1,7 +1,7 @@
 Builtin Functions
 =================
 
-All builtin functions are described here. They are alse available via
+All builtin functions are described here. They are also available via
 ``builtins`` module.
 
 .. function:: abs()

docs/library/esp.rst

@@ -15,7 +15,7 @@ Functions
     Get or set the sleep type.
 
     If the ``sleep_type`` parameter is provided, sets the sleep type to its
-    value. If the function is called wihout parameters, returns the current
+    value. If the function is called without parameters, returns the current
     sleep type.
 
     The possible sleep types are defined as constants:

docs/library/machine.Pin.rst

@@ -84,7 +84,7 @@ Methods
 
             - ``None`` - no pull up or down resistor.
             - ``Pin.PULL_UP`` - pull up resistor enabled.
-            - ``Pin.PULL_DOWN`` - pull down resitor enabled.
+            - ``Pin.PULL_DOWN`` - pull down resistor enabled.
 
          - ``drive`` can be one of:
 

docs/library/machine.RTC.rst

@@ -39,7 +39,7 @@ Methods
 
 .. method:: RTC.alarm(id, time, /*, repeat=False)
 
-   Set the RTC alarm. Time might be either a milllisecond value to program the alarm to
+   Set the RTC alarm. Time might be either a millisecond value to program the alarm to
    current time + time_in_ms in the future, or a datetimetuple. If the time passed is in
    milliseconds, repeat can be set to ``True`` to make the alarm periodic.
 

docs/library/machine.SPI.rst

@@ -45,7 +45,7 @@ Methods
        respectively.
      - ``bits`` is the width of each transfer, accepted values are 8, 16 and 32.
      - ``firstbit`` can be ``SPI.MSB`` only.
-     - ``pins`` is an optional tupple with the pins to assign to the SPI bus.
+     - ``pins`` is an optional tuple with the pins to assign to the SPI bus.
 
 .. method:: SPI.deinit()
 

docs/library/machine.Timer.rst

@@ -104,7 +104,7 @@ Methods
        If only a channel identifier passed, then a previously initialized channel
        object is returned (or ``None`` if there is no previous channel).
 
-       Othwerwise, a TimerChannel object is initialized and returned.
+       Otherwise, a TimerChannel object is initialized and returned.
        
        The operating mode is is the one configured to the Timer object that was used to
        create the channel.
@@ -152,7 +152,7 @@ Methods
 
     .. method:: timerchannel.irq(\*, trigger, priority=1, handler=None)
 
-        The behavior of this callback is heaviliy dependent on the operating
+        The behavior of this callback is heavily dependent on the operating
         mode of the timer channel:
 
             - If mode is ``Timer.PERIODIC`` the callback is executed periodically

docs/library/machine.UART.rst

@@ -167,7 +167,7 @@ Methods
     .. data:: UART.EVEN
     .. data:: UART.ODD
 
-        parity types (anlong with ``None``)
+        parity types (along with ``None``)
 
     .. data:: UART.RX_ANY
 

docs/library/machine.rst

@@ -57,7 +57,7 @@ Power related functions
    Gates the clock to the CPU, useful to reduce power consumption at any time during
    short or long periods. Peripherals continue working and execution resumes as soon
    as any interrupt is triggered (on many ports this includes system timer
-   interrupt occuring at regular intervals on the order of millisecond).
+   interrupt occurring at regular intervals on the order of millisecond).
 
 .. function:: sleep()
 
@@ -96,7 +96,7 @@ Miscellaneous functions
 
 .. function:: unique_id()
 
-   Returns a byte string with a unique idenifier of a board/SoC. It will vary
+   Returns a byte string with a unique identifier of a board/SoC. It will vary
    from a board/SoC instance to another, if underlying hardware allows. Length
    varies by hardware (so use substring of a full value if you expect a short
    ID). In some MicroPython ports, ID corresponds to the network MAC address.

docs/library/network.rst

@@ -237,7 +237,7 @@ For example::
         Get or set the PHY mode.
 
         If the ``mode`` parameter is provided, sets the mode to its value. If
-        the function is called wihout parameters, returns the current mode.
+        the function is called without parameters, returns the current mode.
 
         The possible modes are defined as constants:
             * ``MODE_11B`` -- IEEE 802.11b,
@@ -319,7 +319,7 @@ For example::
             * ``STAT_WRONG_PASSWORD`` -- failed due to incorrect password,
             * ``STAT_NO_AP_FOUND`` -- failed because no access point replied,
             * ``STAT_CONNECT_FAIL`` -- failed due to other problems,
-            * ``STAT_GOT_IP`` -- connection susccessful.
+            * ``STAT_GOT_IP`` -- connection successful.
 
     .. method:: wlan.isconnected()
 
@@ -329,7 +329,7 @@ For example::
 
     .. method:: wlan.ifconfig([(ip, subnet, gateway, dns)])
 
-       Get/set IP-level network interface paremeters: IP address, subnet mask,
+       Get/set IP-level network interface parameters: IP address, subnet mask,
        gateway and DNS server. When called with no arguments, this method returns
        a 4-tuple with the above information. To set the above values, pass a
        4-tuple with the required information.  For example::
@@ -343,8 +343,8 @@ For example::
        with additional parameters beyond standard IP configuration (as dealt with by
        ``wlan.ifconfig()``). These include network-specific and hardware-specific
        parameters. For setting parameters, keyword argument syntax should be used,
-       multiple parameters can be set at once. For querying, paremeters name should
-       be quoted as a string, and only one paramter can be queries at time::
+       multiple parameters can be set at once. For querying, parameters name should
+       be quoted as a string, and only one parameter can be queries at time::
 
         # Set WiFi access point name (formally known as ESSID) and WiFi channel
         ap.config(essid='My AP', channel=11)
@@ -397,7 +397,7 @@ For example::
     .. note::
 
        The ``WLAN`` constructor is special in the sense that if no arguments besides the id are given,
-       it will return the already exisiting ``WLAN`` instance without re-configuring it. This is
+       it will return the already existing ``WLAN`` instance without re-configuring it. This is
        because ``WLAN`` is a system feature of the WiPy. If the already existing instance is not
        initialized it will do the same as the other constructors an will initialize it with default
        values.

docs/library/pyb.ADC.rst

@@ -13,7 +13,7 @@ class ADC -- analog to digital conversion
         adc = pyb.ADC(pin)              # create an analog object from a pin
         val = adc.read()                # read an analog value
     
-        adc = pyb.ADCAll(resolution)    # creale an ADCAll object
+        adc = pyb.ADCAll(resolution)    # create an ADCAll object
         val = adc.read_channel(channel) # read the given channel
         val = adc.read_core_temp()      # read MCU temperature
         val = adc.read_core_vbat()      # read MCU VBAT

docs/library/pyb.DAC.rst

@@ -79,7 +79,7 @@ Methods
 .. method:: DAC.triangle(freq)
 
    Generate a triangle wave.  The value on the DAC output changes at
-   the given frequency, and the frequence of the repeating triangle wave
+   the given frequency, and the frequency of the repeating triangle wave
    itself is 2048 times smaller.
 
 .. method:: DAC.write(value)

docs/library/pyb.ExtInt.rst

@@ -7,7 +7,7 @@ class ExtInt -- configure I/O pins to interrupt on external events
 There are a total of 22 interrupt lines. 16 of these can come from GPIO pins
 and the remaining 6 are from internal sources.
 
-For lines 0 thru 15, a given line can map to the corresponding line from an
+For lines 0 through 15, a given line can map to the corresponding line from an
 arbitrary port. So line 0 can map to Px0 where x is A, B, C, ... and
 line 1 can map to Px1 where x is A, B, C, ... ::
 
@@ -27,7 +27,7 @@ explanation, along with various techniques for debouncing.
 Trying to register 2 callbacks onto the same pin will throw an exception.
 
 If pin is passed as an integer, then it is assumed to map to one of the
-internal interrupt sources, and must be in the range 16 thru 22.
+internal interrupt sources, and must be in the range 16 through 22.
 
 All other pin objects go through the pin mapper to come up with one of the
 gpio pins. ::

docs/library/pyb.I2C.rst

@@ -39,7 +39,7 @@ Printing the i2c object gives you information about its configuration.
 
     You can specify a timeout (in ms)::
 
-        i2c.send(b'123', timeout=2000)   # timout after 2 seconds
+        i2c.send(b'123', timeout=2000)   # timeout after 2 seconds
 
     A master must specify the recipient's address::
 

docs/library/pyb.Pin.rst

@@ -231,7 +231,7 @@ Constants
     class PinAF -- Pin Alternate Functions
     ======================================
     
-    A Pin represents a physical pin on the microcprocessor. Each pin
+    A Pin represents a physical pin on the microprocessor. Each pin
     can have a variety of functions (GPIO, I2C SDA, etc). Each PinAF
     object represents a particular function for a pin.
     
@@ -240,7 +240,7 @@ Constants
         x3 = pyb.Pin.board.X3
         x3_af = x3.af_list()
     
-    x3_af will now contain an array of PinAF objects which are availble on
+    x3_af will now contain an array of PinAF objects which are available on
     pin X3.
     
     For the pyboard, x3_af would contain:

docs/library/pyb.RTC.rst

@@ -73,7 +73,7 @@ Methods
        value, which is an integer in the range [-511 : 512].  With one
        argument it sets the RTC calibration.
     
-       The RTC Smooth Calibration mechanism addjusts the RTC clock rate by
+       The RTC Smooth Calibration mechanism adjusts the RTC clock rate by
        adding or subtracting the given number of ticks from the 32768 Hz
        clock over a 32 second period (corresponding to 2^20 clock ticks.)
        Each tick added will speed up the clock by 1 part in 2^20, or 0.954

docs/library/pyb.Timer.rst

@@ -78,7 +78,7 @@ Methods
        
        Keyword arguments:
        
-         - ``freq`` --- specifies the periodic frequency of the timer. You migh also
+         - ``freq`` --- specifies the periodic frequency of the timer. You might also
            view this as the frequency with which the timer goes through one complete cycle.
        
          - ``prescaler`` [0-0xffff] - specifies the value to be loaded into the
@@ -97,7 +97,7 @@ Methods
     
            - ``Timer.UP`` - configures the timer to count from 0 to ARR (default)
            - ``Timer.DOWN`` - configures the timer to count from ARR down to 0.
-           - ``Timer.CENTER`` - confgures the timer to count from 0 to ARR and
+           - ``Timer.CENTER`` - configures the timer to count from 0 to ARR and
              then back down to 0.
        
          - ``div`` can be one of 1, 2, or 4. Divides the timer clock to determine
@@ -109,7 +109,7 @@ Methods
            transitions on complimentary channels (both channels will be inactive)
            for this time). ``deadtime`` may be an integer between 0 and 1008, with
            the following restrictions: 0-128 in steps of 1. 128-256 in steps of
-           2, 256-512 in steps of 8, and 512-1008 in steps of 16. ``deadime``
+           2, 256-512 in steps of 8, and 512-1008 in steps of 16. ``deadtime``
            measures ticks of ``source_freq`` divided by ``div`` clock ticks.
            ``deadtime`` is only available on timers 1 and 8.
        
@@ -141,7 +141,7 @@ Methods
        If only a channel number is passed, then a previously initialized channel
        object is returned (or ``None`` if there is no previous channel).
        
-       Othwerwise, a TimerChannel object is initialized and returned.
+       Otherwise, a TimerChannel object is initialized and returned.
        
        Each channel can be configured to perform pwm, output compare, or
        input capture. All channels share the same underlying timer, which means
@@ -183,7 +183,7 @@ Methods
          - ``polarity`` can be one of:
     
            - ``Timer.HIGH`` - output is active high
-           - ``Timer.LOW`` - output is acive low
+           - ``Timer.LOW`` - output is active low
        
        Optional keyword arguments for Timer.IC modes:
        

docs/library/ubinascii.rst

@@ -17,7 +17,7 @@ Functions
    .. admonition:: Difference to CPython
       :class: attention
 
-      If additional argument, `sep` is supplied, it is used as a seperator
+      If additional argument, `sep` is supplied, it is used as a separator
       between hexadecimal values.
 
 .. function:: unhexlify(data)

docs/library/ucollections.rst

@@ -13,10 +13,10 @@ Classes
 .. function:: namedtuple(name, fields)
 
     This is factory function to create a new namedtuple type with a specific
-    name and set of fields. A namedtyple is a subclass of tuple which allows
+    name and set of fields. A namedtuple is a subclass of tuple which allows
     to access its fields not just by numeric index, but also with an attribute
     access syntax using symbolic field names. Fields is a sequence of strings
-    specifying field names. For compatibily with CPython it can also be a
+    specifying field names. For compatibility with CPython it can also be a
     a string with space-separated field named (but this is less efficient).
     Example of use::
 

docs/library/uctypes.rst

@@ -118,7 +118,7 @@ Module contents
 
 .. data:: BIG_ENDIAN
 
-   Layour type for a big-endian packed structure.
+   Layout type for a big-endian packed structure.
 
 .. data:: NATIVE
 
@@ -184,7 +184,7 @@ Subscripting a pointer with other integer values but 0 are supported too,
 with the same semantics as in C.
 
 Summing up, accessing structure fields generally follows C syntax,
-except for pointer derefence, when you need to use ``[0]`` operator
+except for pointer dereference, when you need to use ``[0]`` operator
 instead of ``*``.
 
 Limitations

docs/library/uhashlib.rst

@@ -53,7 +53,7 @@ Constructors
       
        Example::
       
-           hash = uhashlib.sha1('abcd1234', 1001)    # lenght of the initial piece is multiple of 4 bytes
+           hash = uhashlib.sha1('abcd1234', 1001)    # length of the initial piece is multiple of 4 bytes
            hash.update('1234')                       # also multiple of 4 bytes
            ...
            hash.update('12345')                      # last chunk may be of any length
@@ -68,7 +68,7 @@ Methods
 
 .. method:: hash.digest()
 
-   Return hash for all data passed thru hash, as a bytes object. After this
+   Return hash for all data passed through hash, as a bytes object. After this
    method is called, more data cannot be fed into hash any longer.
 
    .. only:: port_wipy

docs/library/uio.rst

@@ -12,7 +12,7 @@ Functions
 
 .. function:: open(name, mode='r', **kwargs)
 
-    Open a file. Builtin ``open()`` function is alised to this function.
+    Open a file. Builtin ``open()`` function is aliased to this function.
     All ports (which provide access to file system) are required to support
     `mode` parameter, but support for other arguments vary by port.
 

docs/library/uos.rst

@@ -81,7 +81,7 @@ Functions
 
     .. function:: unmount(path)
 
-       Unmounts a prevoulsy mounted block device from the given path.
+       Unmounts a previously mounted block device from the given path.
 
     .. function:: mkfs(block_device or path)
 

docs/library/utime.rst

@@ -117,7 +117,7 @@ Functions
 .. function:: time()
 
    Returns the number of seconds, as an integer, since the Epoch, assuming that underlying
-   RTC is set and maintained as decsribed above. If an RTC is not set, this function returns
+   RTC is set and maintained as described above. If an RTC is not set, this function returns
    number of seconds since a port-specific reference point in time (for embedded boards without
    a battery-backed RTC, usually since power up or reset). If you want to develop portable
    MicroPython application, you should not rely on this function to provide higher than second

docs/pyboard/tutorial/timer.rst

@@ -95,7 +95,7 @@ We set up timer 2 as follows::
 
 The prescaler is set at 83, which makes this timer count at 1 MHz.
 This is because the CPU clock, running at 168 MHz, is divided by
-2 and then by prescaler+1, giving a freqency of 168 MHz/2/(83+1)=1 MHz
+2 and then by prescaler+1, giving a frequency of 168 MHz/2/(83+1)=1 MHz
 for timer 2.  The period is set to a large number so that the timer
 can count up to a large number before wrapping back around to zero.
 In this case it will take about 17 minutes before it cycles back to

docs/pyboard/tutorial/usb_mouse.rst

@@ -61,7 +61,7 @@ The first argument to the function ``osc`` is the number of mouse events to send
 and the second argument is the delay (in milliseconds) between events.  Try
 playing around with different numbers.
 
-**Excercise: make the mouse go around in a circle.**
+**Exercise: make the mouse go around in a circle.**
 
 Making a mouse with the accelerometer
 -------------------------------------
@@ -92,7 +92,7 @@ In safe mode, the ``boot.py`` and ``main.py`` files are not executed, and so
 the pyboard boots up with default settings.  This means you now have access
 to the filesystem (the USB drive should appear), and you can edit ``main.py``.
 (Leave ``boot.py`` as-is, because we still want to go back to HID-mode after
-we finish editting ``main.py``.)
+we finish editing ``main.py``.)
 
 In ``main.py`` put the following code::
 

docs/reference/asm_thumb2_hints_tips.rst

@@ -129,7 +129,7 @@ Non-integer data types
 ~~~~~~~~~~~~~~~~~~~~~~
 
 These may be handled by means of arrays of the appropriate data type. For
-example, single precison floating point data may be processed as follows.
+example, single precision floating point data may be processed as follows.
 This code example takes an array of floats and replaces its contents with
 their squares.
 
@@ -172,7 +172,7 @@ thus:
 
 The const() construct causes MicroPython to replace the variable name
 with its value at compile time. If constants are declared in an outer
-Python scope they can be shared between mutiple assembler functions and
+Python scope they can be shared between multiple assembler functions and
 with Python code.
 
 Assembler code as class methods

docs/reference/asm_thumb2_label_branch.rst

@@ -23,7 +23,7 @@ specifiers:
 * ne Not equal
 * cs Carry set
 * cc Carry clear
-* mi Minus (negaive)
+* mi Minus (negative)
 * pl Plus (positive)
 * vs Overflow set
 * vc Overflow clear

docs/reference/isr_rules.rst

@@ -24,7 +24,7 @@ This summarises the points detailed below and lists the principal recommendation
 * Where an ISR returns multiple bytes use a pre-allocated ``bytearray``. If multiple integers are to be
   shared between an ISR and the main program consider an array (``array.array``).
 * Where data is shared between the main program and an ISR, consider disabling interrupts prior to accessing
-  the data in the main program and re-enabling them immediately afterwards (see Critcal Sections).
+  the data in the main program and re-enabling them immediately afterwards (see Critical Sections).
 * Allocate an emergency exception buffer (see below).
 
 

docs/reference/repl.rst

@@ -50,7 +50,7 @@ Finally type ``print(i)``, press RETURN, press BACKSPACE and press RETURN again:
     >>>
 
 Auto-indent won't be applied if the previous two lines were all spaces.  This
-means that you can finish entering a compound statment by pressing RETURN
+means that you can finish entering a compound statement by pressing RETURN
 twice, and then a third press will finish and execute.
 
 Auto-completion
@@ -80,7 +80,7 @@ expansions:
 Interrupting a running program
 ------------------------------
 
-You can interupt a running program by pressing Ctrl-C. This will raise a KeyboardInterrupt
+You can interrupt a running program by pressing Ctrl-C. This will raise a KeyboardInterrupt
 which will bring you back to the REPL, providing your program doesn't intercept the
 KeyboardInterrupt exception.
 
@@ -184,8 +184,8 @@ variables no longer exist:
 The special variable _ (underscore)
 -----------------------------------
 
-When you use the REPL, you may perfom computations and see the results.
-MicroPython stores the results of the previous statment in the variable _ (underscore).
+When you use the REPL, you may perform computations and see the results.
+MicroPython stores the results of the previous statement in the variable _ (underscore).
 So you can use the underscore to save the result in a variable. For example:
 
     >>> 1 + 2 + 3 + 4 + 5

docs/wipy/general.rst

@@ -16,7 +16,7 @@ Before applying power
 
 .. warning:: 
 
-   The GPIO pins of the WiPy are NOT 5V tolerant, connecting them to voltages higer
+   The GPIO pins of the WiPy are NOT 5V tolerant, connecting them to voltages higher
    than 3.6V will cause irreparable damage to the board. ADC pins, when configured 
    in analog mode cannot withstand voltages above 1.8V. Keep these considerations in
    mind when wiring your electronics.

docs/wipy/quickref.rst

@@ -205,7 +205,7 @@ See :ref:`network.Server <network.Server>` ::
     server = Server(login=('user', 'password'), timeout=60)
     server.timeout(300) # change the timeout
     server.timeout() # get the timeout
-    server.isrunning() # check wether the server is running or not
+    server.isrunning() # check whether the server is running or not
 
 Heart beat LED
 --------------

docs/wipy/tutorial/intro.rst

@@ -17,7 +17,7 @@ Because the WiPy/expansion board does not have a housing it needs a bit of care:
     If you experience a lot of static electricity in your area (eg dry and cold
     climates), take extra care not to shock the WiPy.  If your WiPy came
     in a ESD bag, then this bag is the best way to store and carry the
-    WiPy as it will protect it agains static discharges.
+    WiPy as it will protect it against static discharges.
 
 As long as you take care of the hardware, you should be okay.  It's almost
 impossible to break the software on the WiPy, so feel free to play around