mimxrt: Add new, minimal port to NXP i.MX RT series CPUs.
This is an extremely minimal port to the NXP i.MX RT, in the style of the
SAMD port It's largely based on the TinyUSB mimxrt implementation, using
the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over
the USB-VCP interface.
This commit also adds the NXP SDK submodule (also from TinyUSB) to
lib/nxp_driver.
Note: if you already have the tinyusb submodule initialized recursively you
will need to run the following as the tinyusb sub-submodules have been
rearranged (upstream):
git submodule deinit lib/tinyusb
rm -rf .git/modules/lib/tinyusb
git submodule update --init lib/tinyusb
This commit is contained in:
Jim Mussared
Damien George
parent
211032a5c9
commit
f46782dde9
|
|
@ -33,3 +33,6 @@
|
||||||
[submodule "lib/btstack"]
|
[submodule "lib/btstack"]
|
||||||
path = lib/btstack
|
path = lib/btstack
|
||||||
url = https://github.com/bluekitchen/btstack.git
|
url = https://github.com/bluekitchen/btstack.git
|
||||||
|
[submodule "lib/nxp_driver"]
|
||||||
|
path = lib/nxp_driver
|
||||||
|
url = https://github.com/hathach/nxp_driver.git
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
Subproject commit b618cb1d521cc9e133bdcd0fca154dee2d925dfe
|
||||||
|
|
@ -0,0 +1,133 @@
|
||||||
|
BOARD ?= TEENSY40
|
||||||
|
BOARD_DIR ?= boards/$(BOARD)
|
||||||
|
BUILD ?= build-$(BOARD)
|
||||||
|
|
||||||
|
CROSS_COMPILE ?= arm-none-eabi-
|
||||||
|
|
||||||
|
ifeq ($(wildcard $(BOARD_DIR)/.),)
|
||||||
|
$(error Invalid BOARD specified: $(BOARD_DIR))
|
||||||
|
endif
|
||||||
|
|
||||||
|
include ../../py/mkenv.mk
|
||||||
|
include $(BOARD_DIR)/mpconfigboard.mk
|
||||||
|
|
||||||
|
# Qstr definitions (must come before including py.mk)
|
||||||
|
QSTR_DEFS = qstrdefsport.h
|
||||||
|
QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
|
||||||
|
|
||||||
|
# Include py core make definitions
|
||||||
|
include $(TOP)/py/py.mk
|
||||||
|
|
||||||
|
GIT_SUBMODULES = lib/tinyusb lib/nxp_driver
|
||||||
|
|
||||||
|
MCU_DIR = lib/nxp_driver/sdk/devices/$(MCU_SERIES)
|
||||||
|
LD_FILES = boards/$(MCU_SERIES).ld $(TOP)/$(MCU_DIR)/gcc/$(MCU_SERIES)xxxxx_flexspi_nor.ld
|
||||||
|
|
||||||
|
# mcu driver cause following warnings
|
||||||
|
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
|
||||||
|
CFLAGS += -Wno-error=unused-parameter
|
||||||
|
|
||||||
|
INC += -I.
|
||||||
|
INC += -I$(TOP)
|
||||||
|
INC += -I$(BUILD)
|
||||||
|
INC += -I$(BOARD_DIR)
|
||||||
|
INC += -I$(TOP)/lib/cmsis/inc
|
||||||
|
INC += -I$(TOP)/$(MCU_DIR)
|
||||||
|
INC += -I$(TOP)/$(MCU_DIR)/drivers
|
||||||
|
INC += -I$(TOP)/$(MCU_DIR)/project_template
|
||||||
|
INC += -I$(TOP)/lib/tinyusb/src
|
||||||
|
INC += -I$(TOP)/lib/tinyusb/hw
|
||||||
|
INC += -I$(TOP)/lib/tinyusb/hw/bsp/teensy_40
|
||||||
|
|
||||||
|
CFLAGS_MCU = -mtune=cortex-m7 -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16
|
||||||
|
CFLAGS = $(INC) -Wall -Werror -std=c99 -nostdlib -mthumb $(CFLAGS_MCU)
|
||||||
|
CFLAGS += -DCPU_$(MCU_SERIES) -DCPU_$(MCU_VARIANT)
|
||||||
|
CFLAGS += -DXIP_EXTERNAL_FLASH=1 \
|
||||||
|
-DXIP_BOOT_HEADER_ENABLE=1 \
|
||||||
|
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \
|
||||||
|
-D__STARTUP_CLEAR_BSS \
|
||||||
|
-D__START=main \
|
||||||
|
-DCPU_HEADER_H='<$(MCU_SERIES).h>'
|
||||||
|
|
||||||
|
LDFLAGS = $(addprefix -T,$(LD_FILES)) -Map=$@.map --cref
|
||||||
|
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
|
||||||
|
|
||||||
|
# Tune for Debugging or Optimization
|
||||||
|
ifeq ($(DEBUG),1)
|
||||||
|
CFLAGS += -O0 -ggdb
|
||||||
|
else
|
||||||
|
CFLAGS += -Os -DNDEBUG
|
||||||
|
LDFLAGS += --gc-sections
|
||||||
|
CFLAGS += -fdata-sections -ffunction-sections
|
||||||
|
endif
|
||||||
|
|
||||||
|
# TinyUSB Stack source
|
||||||
|
SRC_TINYUSB_C += \
|
||||||
|
lib/tinyusb/src/tusb.c \
|
||||||
|
lib/tinyusb/src/common/tusb_fifo.c \
|
||||||
|
lib/tinyusb/src/device/usbd.c \
|
||||||
|
lib/tinyusb/src/device/usbd_control.c \
|
||||||
|
lib/tinyusb/src/class/msc/msc_device.c \
|
||||||
|
lib/tinyusb/src/class/cdc/cdc_device.c \
|
||||||
|
lib/tinyusb/src/class/dfu/dfu_rt_device.c \
|
||||||
|
lib/tinyusb/src/class/hid/hid_device.c \
|
||||||
|
lib/tinyusb/src/class/midi/midi_device.c \
|
||||||
|
lib/tinyusb/src/class/usbtmc/usbtmc_device.c \
|
||||||
|
lib/tinyusb/src/class/vendor/vendor_device.c \
|
||||||
|
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c
|
||||||
|
|
||||||
|
SRC_TINYUSB_IMX_C += \
|
||||||
|
$(MCU_DIR)/system_$(MCU_SERIES).c \
|
||||||
|
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
|
||||||
|
$(MCU_DIR)/project_template/clock_config.c \
|
||||||
|
$(MCU_DIR)/drivers/fsl_clock.c \
|
||||||
|
$(MCU_DIR)/drivers/fsl_gpio.c \
|
||||||
|
$(MCU_DIR)/drivers/fsl_common.c \
|
||||||
|
$(MCU_DIR)/drivers/fsl_lpuart.c \
|
||||||
|
$(MCU_DIR)/drivers/fsl_flexram.c \
|
||||||
|
|
||||||
|
SRC_C = \
|
||||||
|
main.c \
|
||||||
|
tusb_port.c \
|
||||||
|
board_init.c \
|
||||||
|
$(BOARD_DIR)/flash_config.c \
|
||||||
|
modutime.c \
|
||||||
|
modmachine.c \
|
||||||
|
mphalport.c \
|
||||||
|
lib/mp-readline/readline.c \
|
||||||
|
lib/libc/string0.c \
|
||||||
|
lib/utils/printf.c \
|
||||||
|
lib/utils/pyexec.c \
|
||||||
|
lib/utils/stdout_helpers.c \
|
||||||
|
$(SRC_TINYUSB_C) \
|
||||||
|
$(SRC_TINYUSB_IMX_C) \
|
||||||
|
|
||||||
|
SRC_SS = $(MCU_DIR)/gcc/startup_$(MCU_SERIES).S
|
||||||
|
|
||||||
|
SRC_S = lib/utils/gchelper_m3.s \
|
||||||
|
|
||||||
|
# List of sources for qstr extraction
|
||||||
|
SRC_QSTR += modutime.c modmachine.c
|
||||||
|
|
||||||
|
OBJ += $(PY_O)
|
||||||
|
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
||||||
|
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
|
||||||
|
OBJ += $(addprefix $(BUILD)/, $(SRC_SS:.S=.o))
|
||||||
|
|
||||||
|
# Workaround for bug in older gcc, warning on "static usbd_device_t _usbd_dev = { 0 };"
|
||||||
|
$(BUILD)/lib/tinyusb/src/device/usbd.o: CFLAGS += -Wno-missing-braces
|
||||||
|
|
||||||
|
all: $(BUILD)/firmware.hex
|
||||||
|
|
||||||
|
$(BUILD)/firmware.elf: $(OBJ)
|
||||||
|
$(ECHO) "LINK $@"
|
||||||
|
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
|
||||||
|
$(Q)$(SIZE) $@
|
||||||
|
|
||||||
|
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
|
||||||
|
$(Q)$(OBJCOPY) -O binary $^ $@
|
||||||
|
|
||||||
|
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
|
||||||
|
$(Q)$(OBJCOPY) -O ihex -R .eeprom $< $@
|
||||||
|
|
||||||
|
include $(TOP)/py/mkrules.mk
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
Port of MicroPython to NXP iMX RT 10xx
|
||||||
|
======================================
|
||||||
|
|
||||||
|
Currently supports Teensy 4.0.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
- REPL over USB VCP
|
||||||
|
|
||||||
|
Known issues:
|
||||||
|
- pyboard.py doesn't work with files larger than 64 bytes
|
||||||
|
|
||||||
|
TODO:
|
||||||
|
- Enable TCM
|
||||||
|
- Peripherals (pins, LED, Timers, etc)
|
||||||
|
|
@ -0,0 +1,114 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* Based on tinyusb/hw/bsp/teensy_40/teensy40.c
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2018, hathach (tinyusb.org)
|
||||||
|
* Copyright (c) 2020, Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "py/runtime.h"
|
||||||
|
|
||||||
|
#include "tusb.h"
|
||||||
|
|
||||||
|
#include "fsl_device_registers.h"
|
||||||
|
#include "fsl_gpio.h"
|
||||||
|
#include "fsl_iomuxc.h"
|
||||||
|
#include "fsl_clock.h"
|
||||||
|
#include "fsl_lpuart.h"
|
||||||
|
|
||||||
|
#include "clock_config.h"
|
||||||
|
|
||||||
|
#define LED_STATE_ON (0)
|
||||||
|
|
||||||
|
volatile uint32_t systick_ms = 0;
|
||||||
|
|
||||||
|
const uint8_t dcd_data[] = { 0x00 };
|
||||||
|
|
||||||
|
void board_led_write(bool state);
|
||||||
|
|
||||||
|
void board_init(void) {
|
||||||
|
// Init clock
|
||||||
|
BOARD_BootClockRUN();
|
||||||
|
SystemCoreClockUpdate();
|
||||||
|
|
||||||
|
// Enable IOCON clock
|
||||||
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||||
|
|
||||||
|
// 1ms tick timer
|
||||||
|
SysTick_Config(SystemCoreClock / 1000);
|
||||||
|
|
||||||
|
// LED
|
||||||
|
IOMUXC_SetPinMux(MICROPY_HW_LED_PINMUX, 0U);
|
||||||
|
IOMUXC_SetPinConfig(MICROPY_HW_LED_PINMUX, 0x10B0U);
|
||||||
|
|
||||||
|
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
|
||||||
|
GPIO_PinInit(MICROPY_HW_LED_PORT, MICROPY_HW_LED_PIN, &led_config);
|
||||||
|
board_led_write(true);
|
||||||
|
|
||||||
|
//------------- USB0 -------------//
|
||||||
|
|
||||||
|
// Clock
|
||||||
|
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
|
||||||
|
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
|
||||||
|
|
||||||
|
#ifdef USBPHY1
|
||||||
|
USBPHY_Type *usb_phy = USBPHY1;
|
||||||
|
#else
|
||||||
|
USBPHY_Type *usb_phy = USBPHY;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Enable PHY support for Low speed device + LS via FS Hub
|
||||||
|
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
|
||||||
|
|
||||||
|
// Enable all power for normal operation
|
||||||
|
usb_phy->PWD = 0;
|
||||||
|
|
||||||
|
// TX Timing
|
||||||
|
uint32_t phytx = usb_phy->TX;
|
||||||
|
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
|
||||||
|
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
|
||||||
|
usb_phy->TX = phytx;
|
||||||
|
|
||||||
|
// USB1
|
||||||
|
// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
|
||||||
|
// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U);
|
||||||
|
}
|
||||||
|
|
||||||
|
void board_led_write(bool state) {
|
||||||
|
GPIO_PinWrite(MICROPY_HW_LED_PORT, MICROPY_HW_LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
|
||||||
|
}
|
||||||
|
|
||||||
|
void SysTick_Handler(void) {
|
||||||
|
systick_ms++;
|
||||||
|
}
|
||||||
|
|
||||||
|
void USB_OTG1_IRQHandler(void) {
|
||||||
|
tud_isr(0);
|
||||||
|
tud_task();
|
||||||
|
}
|
||||||
|
|
||||||
|
void USB_OTG2_IRQHandler(void) {
|
||||||
|
tud_isr(1);
|
||||||
|
tud_task();
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,8 @@
|
||||||
|
/* 32kiB stack. */
|
||||||
|
__stack_size__ = 0x8000;
|
||||||
|
_estack = __StackTop;
|
||||||
|
_sstack = __StackLimit;
|
||||||
|
|
||||||
|
/* Use second OCRAM bank for GC heap. */
|
||||||
|
_gc_heap_start = ORIGIN(m_data2);
|
||||||
|
_gc_heap_end = ORIGIN(m_data2) + LENGTH(m_data2);
|
||||||
|
|
@ -0,0 +1,51 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2018 NXP
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c
|
||||||
|
|
||||||
|
#include "teensy40_flexspi_nor_config.h"
|
||||||
|
|
||||||
|
/* Component ID definition, used by tools. */
|
||||||
|
#ifndef FSL_COMPONENT_ID
|
||||||
|
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* Code
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
|
||||||
|
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
|
||||||
|
__attribute__((section(".boot_hdr.conf")))
|
||||||
|
#elif defined(__ICCARM__)
|
||||||
|
#pragma location = ".boot_hdr.conf"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
const flexspi_nor_config_t qspiflash_config = {
|
||||||
|
.memConfig =
|
||||||
|
{
|
||||||
|
.tag = FLEXSPI_CFG_BLK_TAG,
|
||||||
|
.version = FLEXSPI_CFG_BLK_VERSION,
|
||||||
|
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
|
||||||
|
.csHoldTime = 3u,
|
||||||
|
.csSetupTime = 3u,
|
||||||
|
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
|
||||||
|
.sflashPadType = kSerialFlash_4Pads,
|
||||||
|
.serialClkFreq = kFlexSpiSerialClk_100MHz,
|
||||||
|
.sflashA1Size = 2u * 1024u * 1024u,
|
||||||
|
.lookupTable =
|
||||||
|
{
|
||||||
|
// Read LUTs
|
||||||
|
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
|
||||||
|
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
|
||||||
|
},
|
||||||
|
},
|
||||||
|
.pageSize = 256u,
|
||||||
|
.sectorSize = 4u * 1024u,
|
||||||
|
.blockSize = 256u * 1024u,
|
||||||
|
.isUniformBlockSize = false,
|
||||||
|
};
|
||||||
|
#endif /* XIP_BOOT_HEADER_ENABLE */
|
||||||
|
|
@ -0,0 +1,8 @@
|
||||||
|
#define MICROPY_HW_BOARD_NAME "Teensy 4.0"
|
||||||
|
#define MICROPY_HW_MCU_NAME "MIMXRT1062DVJ6A"
|
||||||
|
|
||||||
|
#define BOARD_FLASH_SIZE (2 * 1024 * 1024)
|
||||||
|
|
||||||
|
#define MICROPY_HW_LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13
|
||||||
|
#define MICROPY_HW_LED_PORT GPIO2
|
||||||
|
#define MICROPY_HW_LED_PIN 3
|
||||||
|
|
@ -0,0 +1,5 @@
|
||||||
|
MCU_SERIES = MIMXRT1062
|
||||||
|
MCU_VARIANT = MIMXRT1062DVJ6A
|
||||||
|
|
||||||
|
deploy: $(BUILD)/firmware.hex
|
||||||
|
teensy_loader_cli --mcu=imxrt1062 -v -w $<
|
||||||
|
|
@ -0,0 +1,270 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2018 NXP
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h
|
||||||
|
|
||||||
|
#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__
|
||||||
|
#define __TEENSY40_FLEXSPI_NOR_CONFIG__
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include "fsl_common.h"
|
||||||
|
|
||||||
|
/*! @name Driver version */
|
||||||
|
/*@{*/
|
||||||
|
/*! @brief XIP_BOARD driver version 2.0.0. */
|
||||||
|
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
|
||||||
|
/*@}*/
|
||||||
|
|
||||||
|
/* FLEXSPI memory config block related defintions */
|
||||||
|
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
|
||||||
|
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
|
||||||
|
#define FLEXSPI_CFG_BLK_SIZE (512)
|
||||||
|
|
||||||
|
/* FLEXSPI Feature related definitions */
|
||||||
|
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
|
||||||
|
|
||||||
|
/* Lookup table related defintions */
|
||||||
|
#define CMD_INDEX_READ 0
|
||||||
|
#define CMD_INDEX_READSTATUS 1
|
||||||
|
#define CMD_INDEX_WRITEENABLE 2
|
||||||
|
#define CMD_INDEX_WRITE 4
|
||||||
|
|
||||||
|
#define CMD_LUT_SEQ_IDX_READ 0
|
||||||
|
#define CMD_LUT_SEQ_IDX_READSTATUS 1
|
||||||
|
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
|
||||||
|
#define CMD_LUT_SEQ_IDX_WRITE 9
|
||||||
|
|
||||||
|
#define CMD_SDR 0x01
|
||||||
|
#define CMD_DDR 0x21
|
||||||
|
#define RADDR_SDR 0x02
|
||||||
|
#define RADDR_DDR 0x22
|
||||||
|
#define CADDR_SDR 0x03
|
||||||
|
#define CADDR_DDR 0x23
|
||||||
|
#define MODE1_SDR 0x04
|
||||||
|
#define MODE1_DDR 0x24
|
||||||
|
#define MODE2_SDR 0x05
|
||||||
|
#define MODE2_DDR 0x25
|
||||||
|
#define MODE4_SDR 0x06
|
||||||
|
#define MODE4_DDR 0x26
|
||||||
|
#define MODE8_SDR 0x07
|
||||||
|
#define MODE8_DDR 0x27
|
||||||
|
#define WRITE_SDR 0x08
|
||||||
|
#define WRITE_DDR 0x28
|
||||||
|
#define READ_SDR 0x09
|
||||||
|
#define READ_DDR 0x29
|
||||||
|
#define LEARN_SDR 0x0A
|
||||||
|
#define LEARN_DDR 0x2A
|
||||||
|
#define DATSZ_SDR 0x0B
|
||||||
|
#define DATSZ_DDR 0x2B
|
||||||
|
#define DUMMY_SDR 0x0C
|
||||||
|
#define DUMMY_DDR 0x2C
|
||||||
|
#define DUMMY_RWDS_SDR 0x0D
|
||||||
|
#define DUMMY_RWDS_DDR 0x2D
|
||||||
|
#define JMP_ON_CS 0x1F
|
||||||
|
#define STOP 0
|
||||||
|
|
||||||
|
#define FLEXSPI_1PAD 0
|
||||||
|
#define FLEXSPI_2PAD 1
|
||||||
|
#define FLEXSPI_4PAD 2
|
||||||
|
#define FLEXSPI_8PAD 3
|
||||||
|
|
||||||
|
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
|
||||||
|
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
|
||||||
|
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
|
||||||
|
|
||||||
|
//!@brief Definitions for FlexSPI Serial Clock Frequency
|
||||||
|
typedef enum _FlexSpiSerialClockFreq
|
||||||
|
{
|
||||||
|
kFlexSpiSerialClk_30MHz = 1,
|
||||||
|
kFlexSpiSerialClk_50MHz = 2,
|
||||||
|
kFlexSpiSerialClk_60MHz = 3,
|
||||||
|
kFlexSpiSerialClk_75MHz = 4,
|
||||||
|
kFlexSpiSerialClk_80MHz = 5,
|
||||||
|
kFlexSpiSerialClk_100MHz = 6,
|
||||||
|
kFlexSpiSerialClk_120MHz = 7,
|
||||||
|
kFlexSpiSerialClk_133MHz = 8,
|
||||||
|
kFlexSpiSerialClk_166MHz = 9,
|
||||||
|
} flexspi_serial_clk_freq_t;
|
||||||
|
|
||||||
|
//!@brief FlexSPI clock configuration type
|
||||||
|
enum
|
||||||
|
{
|
||||||
|
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
|
||||||
|
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
|
||||||
|
};
|
||||||
|
|
||||||
|
//!@brief FlexSPI Read Sample Clock Source definition
|
||||||
|
typedef enum _FlashReadSampleClkSource
|
||||||
|
{
|
||||||
|
kFlexSPIReadSampleClk_LoopbackInternally = 0,
|
||||||
|
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
|
||||||
|
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
|
||||||
|
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
|
||||||
|
} flexspi_read_sample_clk_t;
|
||||||
|
|
||||||
|
//!@brief Misc feature bit definitions
|
||||||
|
enum
|
||||||
|
{
|
||||||
|
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
|
||||||
|
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
|
||||||
|
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
|
||||||
|
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
|
||||||
|
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
|
||||||
|
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
|
||||||
|
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
|
||||||
|
};
|
||||||
|
|
||||||
|
//!@brief Flash Type Definition
|
||||||
|
enum
|
||||||
|
{
|
||||||
|
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
|
||||||
|
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
|
||||||
|
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
|
||||||
|
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
|
||||||
|
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
|
||||||
|
};
|
||||||
|
|
||||||
|
//!@brief Flash Pad Definitions
|
||||||
|
enum
|
||||||
|
{
|
||||||
|
kSerialFlash_1Pad = 1,
|
||||||
|
kSerialFlash_2Pads = 2,
|
||||||
|
kSerialFlash_4Pads = 4,
|
||||||
|
kSerialFlash_8Pads = 8,
|
||||||
|
};
|
||||||
|
|
||||||
|
//!@brief FlexSPI LUT Sequence structure
|
||||||
|
typedef struct _lut_sequence
|
||||||
|
{
|
||||||
|
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
|
||||||
|
uint8_t seqId; //!< Sequence Index, valid number: 0-15
|
||||||
|
uint16_t reserved;
|
||||||
|
} flexspi_lut_seq_t;
|
||||||
|
|
||||||
|
//!@brief Flash Configuration Command Type
|
||||||
|
enum
|
||||||
|
{
|
||||||
|
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
|
||||||
|
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
|
||||||
|
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
|
||||||
|
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
|
||||||
|
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
|
||||||
|
kDeviceConfigCmdType_Reset, //!< Reset device command
|
||||||
|
};
|
||||||
|
|
||||||
|
//!@brief FlexSPI Memory Configuration Block
|
||||||
|
typedef struct _FlexSPIConfig
|
||||||
|
{
|
||||||
|
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
|
||||||
|
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
|
||||||
|
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
|
||||||
|
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
|
||||||
|
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
|
||||||
|
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
|
||||||
|
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
|
||||||
|
//! Serial NAND, need to refer to datasheet
|
||||||
|
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
|
||||||
|
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
|
||||||
|
//! Generic configuration, etc.
|
||||||
|
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
|
||||||
|
//! DPI/QPI/OPI switch or reset command
|
||||||
|
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
|
||||||
|
//! sequence number, [31:16] Reserved
|
||||||
|
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
|
||||||
|
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
|
||||||
|
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
|
||||||
|
flexspi_lut_seq_t
|
||||||
|
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
|
||||||
|
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
|
||||||
|
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
|
||||||
|
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
|
||||||
|
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
|
||||||
|
//! details
|
||||||
|
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
|
||||||
|
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
|
||||||
|
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
|
||||||
|
//! Chapter for more details
|
||||||
|
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
|
||||||
|
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
|
||||||
|
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
|
||||||
|
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
|
||||||
|
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
|
||||||
|
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
|
||||||
|
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
|
||||||
|
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
|
||||||
|
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
|
||||||
|
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
|
||||||
|
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
|
||||||
|
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
|
||||||
|
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
|
||||||
|
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
|
||||||
|
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
|
||||||
|
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
|
||||||
|
//! busy flag is 0 when flash device is busy
|
||||||
|
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
|
||||||
|
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
|
||||||
|
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
|
||||||
|
} flexspi_mem_config_t;
|
||||||
|
|
||||||
|
/* */
|
||||||
|
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
|
||||||
|
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
|
||||||
|
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
|
||||||
|
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
|
||||||
|
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
|
||||||
|
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
|
||||||
|
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
|
||||||
|
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
|
||||||
|
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
|
||||||
|
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
|
||||||
|
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
|
||||||
|
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
|
||||||
|
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
|
||||||
|
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
|
||||||
|
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
|
||||||
|
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
|
||||||
|
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Serial NOR configuration block
|
||||||
|
*/
|
||||||
|
typedef struct _flexspi_nor_config
|
||||||
|
{
|
||||||
|
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
|
||||||
|
uint32_t pageSize; //!< Page size of Serial NOR
|
||||||
|
uint32_t sectorSize; //!< Sector size of Serial NOR
|
||||||
|
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
|
||||||
|
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
|
||||||
|
uint8_t reserved0[2]; //!< Reserved for future use
|
||||||
|
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
|
||||||
|
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
|
||||||
|
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
|
||||||
|
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
|
||||||
|
uint32_t blockSize; //!< Block size
|
||||||
|
uint32_t reserve2[11]; //!< Reserved for future use
|
||||||
|
} flexspi_nor_config_t;
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */
|
||||||
|
|
@ -0,0 +1,108 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
* Copyright (c) 2020 Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "py/compile.h"
|
||||||
|
#include "py/runtime.h"
|
||||||
|
#include "py/gc.h"
|
||||||
|
#include "py/mperrno.h"
|
||||||
|
#include "py/stackctrl.h"
|
||||||
|
#include "lib/utils/gchelper.h"
|
||||||
|
#include "lib/utils/pyexec.h"
|
||||||
|
#include "tusb.h"
|
||||||
|
|
||||||
|
extern uint8_t _sstack, _estack, _gc_heap_start, _gc_heap_end;
|
||||||
|
|
||||||
|
void board_init(void);
|
||||||
|
|
||||||
|
int main(void) {
|
||||||
|
board_init();
|
||||||
|
tusb_init();
|
||||||
|
|
||||||
|
mp_stack_set_top(&_estack);
|
||||||
|
mp_stack_set_limit(&_estack - &_sstack - 1024);
|
||||||
|
|
||||||
|
for (;;) {
|
||||||
|
gc_init(&_gc_heap_start, &_gc_heap_end);
|
||||||
|
mp_init();
|
||||||
|
|
||||||
|
mp_obj_list_init(MP_OBJ_TO_PTR(mp_sys_path), 0);
|
||||||
|
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR_));
|
||||||
|
mp_obj_list_init(MP_OBJ_TO_PTR(mp_sys_argv), 0);
|
||||||
|
|
||||||
|
for (;;) {
|
||||||
|
if (pyexec_mode_kind == PYEXEC_MODE_RAW_REPL) {
|
||||||
|
if (pyexec_raw_repl() != 0) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
if (pyexec_friendly_repl() != 0) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
mp_printf(MP_PYTHON_PRINTER, "MPY: soft reboot\n");
|
||||||
|
gc_sweep_all();
|
||||||
|
mp_deinit();
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void gc_collect(void) {
|
||||||
|
gc_collect_start();
|
||||||
|
uintptr_t regs[10];
|
||||||
|
uintptr_t sp = gc_helper_get_regs_and_sp(regs);
|
||||||
|
gc_collect_root((void **)sp, ((uintptr_t)MP_STATE_THREAD(stack_top) - sp) / sizeof(uint32_t));
|
||||||
|
gc_collect_end();
|
||||||
|
}
|
||||||
|
|
||||||
|
mp_lexer_t *mp_lexer_new_from_file(const char *filename) {
|
||||||
|
mp_raise_OSError(MP_ENOENT);
|
||||||
|
}
|
||||||
|
|
||||||
|
mp_import_stat_t mp_import_stat(const char *path) {
|
||||||
|
return MP_IMPORT_STAT_NO_EXIST;
|
||||||
|
}
|
||||||
|
|
||||||
|
mp_obj_t mp_builtin_open(size_t n_args, const mp_obj_t *args, mp_map_t *kwargs) {
|
||||||
|
return mp_const_none;
|
||||||
|
}
|
||||||
|
MP_DEFINE_CONST_FUN_OBJ_KW(mp_builtin_open_obj, 1, mp_builtin_open);
|
||||||
|
|
||||||
|
void nlr_jump_fail(void *val) {
|
||||||
|
for (;;) {
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef NDEBUG
|
||||||
|
void MP_WEAK __assert_func(const char *file, int line, const char *func, const char *expr) {
|
||||||
|
mp_printf(MP_PYTHON_PRINTER, "Assertion '%s' failed, at file %s:%d\n", expr, file, line);
|
||||||
|
for (;;) {
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,57 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
* Copyright (c) 2020 Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "py/runtime.h"
|
||||||
|
#include "extmod/machine_mem.h"
|
||||||
|
|
||||||
|
#include CPU_HEADER_H
|
||||||
|
|
||||||
|
STATIC mp_obj_t machine_reset(void) {
|
||||||
|
NVIC_SystemReset();
|
||||||
|
return mp_const_none;
|
||||||
|
}
|
||||||
|
MP_DEFINE_CONST_FUN_OBJ_0(machine_reset_obj, machine_reset);
|
||||||
|
|
||||||
|
STATIC mp_obj_t machine_freq(void) {
|
||||||
|
return MP_OBJ_NEW_SMALL_INT(0);
|
||||||
|
}
|
||||||
|
MP_DEFINE_CONST_FUN_OBJ_0(machine_freq_obj, machine_freq);
|
||||||
|
|
||||||
|
STATIC const mp_rom_map_elem_t machine_module_globals_table[] = {
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_umachine) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_reset), MP_ROM_PTR(&machine_reset_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_freq), MP_ROM_PTR(&machine_freq_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_mem8), MP_ROM_PTR(&machine_mem8_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_mem16), MP_ROM_PTR(&machine_mem16_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_mem32), MP_ROM_PTR(&machine_mem32_obj) },
|
||||||
|
};
|
||||||
|
STATIC MP_DEFINE_CONST_DICT(machine_module_globals, machine_module_globals_table);
|
||||||
|
|
||||||
|
const mp_obj_module_t mp_module_machine = {
|
||||||
|
.base = { &mp_type_module },
|
||||||
|
.globals = (mp_obj_dict_t *)&machine_module_globals,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,48 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
* Copyright (c) 2020 Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "extmod/utime_mphal.h"
|
||||||
|
|
||||||
|
STATIC const mp_rom_map_elem_t time_module_globals_table[] = {
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_utime) },
|
||||||
|
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_sleep), MP_ROM_PTR(&mp_utime_sleep_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_sleep_ms), MP_ROM_PTR(&mp_utime_sleep_ms_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_sleep_us), MP_ROM_PTR(&mp_utime_sleep_us_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_ticks_ms), MP_ROM_PTR(&mp_utime_ticks_ms_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_ticks_us), MP_ROM_PTR(&mp_utime_ticks_us_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_ticks_cpu), MP_ROM_PTR(&mp_utime_ticks_cpu_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_ticks_add), MP_ROM_PTR(&mp_utime_ticks_add_obj) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_ticks_diff), MP_ROM_PTR(&mp_utime_ticks_diff_obj) },
|
||||||
|
};
|
||||||
|
|
||||||
|
STATIC MP_DEFINE_CONST_DICT(time_module_globals, time_module_globals_table);
|
||||||
|
|
||||||
|
const mp_obj_module_t mp_module_utime = {
|
||||||
|
.base = { &mp_type_module },
|
||||||
|
.globals = (mp_obj_dict_t *)&time_module_globals,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,109 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Options controlling how MicroPython is built, overriding defaults in py/mpconfig.h
|
||||||
|
|
||||||
|
// Board specific definitions
|
||||||
|
#include "mpconfigboard.h"
|
||||||
|
|
||||||
|
// Memory allocation policies
|
||||||
|
#define MICROPY_GC_STACK_ENTRY_TYPE uint16_t
|
||||||
|
#define MICROPY_GC_ALLOC_THRESHOLD (0)
|
||||||
|
#define MICROPY_ALLOC_PARSE_CHUNK_INIT (32)
|
||||||
|
#define MICROPY_ALLOC_PATH_MAX (256)
|
||||||
|
#define MICROPY_QSTR_BYTES_IN_HASH (1)
|
||||||
|
|
||||||
|
// Compiler configuration
|
||||||
|
#define MICROPY_COMP_CONST (0)
|
||||||
|
|
||||||
|
// Python internal features
|
||||||
|
#define MICROPY_ENABLE_GC (1)
|
||||||
|
#define MICROPY_KBD_EXCEPTION (1)
|
||||||
|
#define MICROPY_HELPER_REPL (1)
|
||||||
|
#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ)
|
||||||
|
#define MICROPY_ENABLE_SOURCE_LINE (1)
|
||||||
|
#define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_TERSE)
|
||||||
|
#define MICROPY_CPYTHON_COMPAT (0)
|
||||||
|
#define MICROPY_CAN_OVERRIDE_BUILTINS (1)
|
||||||
|
|
||||||
|
// Control over Python builtins
|
||||||
|
#define MICROPY_PY_ASYNC_AWAIT (0)
|
||||||
|
#define MICROPY_PY_BUILTINS_STR_COUNT (0)
|
||||||
|
#define MICROPY_PY_BUILTINS_MEMORYVIEW (1)
|
||||||
|
#define MICROPY_PY_BUILTINS_SET (1)
|
||||||
|
#define MICROPY_PY_BUILTINS_FROZENSET (0)
|
||||||
|
#define MICROPY_PY_BUILTINS_PROPERTY (0)
|
||||||
|
#define MICROPY_PY_BUILTINS_ENUMERATE (0)
|
||||||
|
#define MICROPY_PY_BUILTINS_FILTER (0)
|
||||||
|
#define MICROPY_PY_BUILTINS_REVERSED (1)
|
||||||
|
#define MICROPY_PY_BUILTINS_MIN_MAX (0)
|
||||||
|
#define MICROPY_PY___FILE__ (0)
|
||||||
|
#define MICROPY_PY_MICROPYTHON_MEM_INFO (1)
|
||||||
|
#define MICROPY_PY_ARRAY_SLICE_ASSIGN (1)
|
||||||
|
#define MICROPY_PY_ATTRTUPLE (0)
|
||||||
|
#define MICROPY_PY_COLLECTIONS (0)
|
||||||
|
#define MICROPY_PY_SYS_MAXSIZE (1)
|
||||||
|
|
||||||
|
// Extended modules
|
||||||
|
#define MICROPY_PY_UTIME_MP_HAL (1)
|
||||||
|
#define MICROPY_PY_MACHINE (1)
|
||||||
|
|
||||||
|
// Hooks to add builtins
|
||||||
|
|
||||||
|
#define MICROPY_PORT_BUILTINS \
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_open), MP_ROM_PTR(&mp_builtin_open_obj) },
|
||||||
|
|
||||||
|
extern const struct _mp_obj_module_t mp_module_machine;
|
||||||
|
extern const struct _mp_obj_module_t mp_module_utime;
|
||||||
|
|
||||||
|
#define MICROPY_PORT_BUILTIN_MODULES \
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_machine), MP_ROM_PTR(&mp_module_machine) }, \
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_utime), MP_ROM_PTR(&mp_module_utime) }, \
|
||||||
|
|
||||||
|
#define MICROPY_PORT_ROOT_POINTERS \
|
||||||
|
const char *readline_hist[8];
|
||||||
|
|
||||||
|
#define MP_STATE_PORT MP_STATE_VM
|
||||||
|
|
||||||
|
// Miscellaneous settings
|
||||||
|
|
||||||
|
#define MICROPY_EVENT_POLL_HOOK \
|
||||||
|
do { \
|
||||||
|
extern void mp_handle_pending(bool); \
|
||||||
|
mp_handle_pending(true); \
|
||||||
|
__WFI(); \
|
||||||
|
} while (0);
|
||||||
|
|
||||||
|
#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((mp_uint_t)(p) | 1))
|
||||||
|
#define MP_PLAT_PRINT_STRN(str, len) mp_hal_stdout_tx_strn_cooked(str, len)
|
||||||
|
|
||||||
|
#define MP_SSIZE_MAX (0x7fffffff)
|
||||||
|
typedef int mp_int_t; // must be pointer size
|
||||||
|
typedef unsigned mp_uint_t; // must be pointer size
|
||||||
|
typedef long mp_off_t;
|
||||||
|
|
||||||
|
// Need to provide a declaration/definition of alloca()
|
||||||
|
#include <alloca.h>
|
||||||
|
|
@ -0,0 +1,103 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
* Copyright (c) 2020 Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "py/runtime.h"
|
||||||
|
#include "py/mphal.h"
|
||||||
|
#include "tusb.h"
|
||||||
|
|
||||||
|
#include CPU_HEADER_H
|
||||||
|
|
||||||
|
#if MICROPY_KBD_EXCEPTION
|
||||||
|
|
||||||
|
void tud_cdc_rx_wanted_cb(uint8_t itf, char wanted_char) {
|
||||||
|
(void)itf;
|
||||||
|
(void)wanted_char;
|
||||||
|
tud_cdc_read_char(); // discard interrupt char
|
||||||
|
mp_keyboard_interrupt();
|
||||||
|
}
|
||||||
|
|
||||||
|
void mp_hal_set_interrupt_char(int c) {
|
||||||
|
tud_cdc_set_wanted_char(c);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void mp_hal_delay_ms(mp_uint_t ms) {
|
||||||
|
ms += 1;
|
||||||
|
uint32_t t0 = systick_ms;
|
||||||
|
while (systick_ms - t0 < ms) {
|
||||||
|
MICROPY_EVENT_POLL_HOOK
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void mp_hal_delay_us(mp_uint_t us) {
|
||||||
|
uint32_t ms = us / 1000 + 1;
|
||||||
|
uint32_t t0 = systick_ms;
|
||||||
|
while (systick_ms - t0 < ms) {
|
||||||
|
__WFI();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
int mp_hal_stdin_rx_chr(void) {
|
||||||
|
for (;;) {
|
||||||
|
// TODO
|
||||||
|
// if (USARTx->USART.INTFLAG.bit.RXC) {
|
||||||
|
// return USARTx->USART.DATA.bit.DATA;
|
||||||
|
// }
|
||||||
|
if (tud_cdc_connected() && tud_cdc_available()) {
|
||||||
|
uint8_t buf[1];
|
||||||
|
uint32_t count = tud_cdc_read(buf, sizeof(buf));
|
||||||
|
if (count) {
|
||||||
|
return buf[0];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
__WFI();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void mp_hal_stdout_tx_strn(const char *str, mp_uint_t len) {
|
||||||
|
if (tud_cdc_connected()) {
|
||||||
|
for (size_t i = 0; i < len;) {
|
||||||
|
uint32_t n = len - i;
|
||||||
|
uint32_t n2 = tud_cdc_write(str + i, n);
|
||||||
|
if (n2 < n) {
|
||||||
|
while (!tud_cdc_write_flush()) {
|
||||||
|
__WFI();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
i += n2;
|
||||||
|
}
|
||||||
|
while (!tud_cdc_write_flush()) {
|
||||||
|
__WFI();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// TODO
|
||||||
|
// while (len--) {
|
||||||
|
// while (!(USARTx->USART.INTFLAG.bit.DRE)) { }
|
||||||
|
// USARTx->USART.DATA.bit.DATA = *str++;
|
||||||
|
// }
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,48 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
* Copyright (c) 2020 Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
#ifndef MICROPY_INCLUDED_MIMXRT_MPHALPORT_H
|
||||||
|
#define MICROPY_INCLUDED_MIMXRT_MPHALPORT_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
extern volatile uint32_t systick_ms;
|
||||||
|
|
||||||
|
void mp_hal_set_interrupt_char(int c);
|
||||||
|
|
||||||
|
static inline mp_uint_t mp_hal_ticks_ms(void) {
|
||||||
|
return systick_ms;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline mp_uint_t mp_hal_ticks_us(void) {
|
||||||
|
return systick_ms * 1000;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline mp_uint_t mp_hal_ticks_cpu(void) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // MICROPY_INCLUDED_MIMXRT_MPHALPORT_H
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
// qstrs specific to this port
|
||||||
|
// *FORMAT-OFF*
|
||||||
|
|
@ -0,0 +1,36 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020 Jim Mussared
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#ifndef MICROPY_INCLUDED_MIMXRT_TUSB_CONFIG_H
|
||||||
|
#define MICROPY_INCLUDED_MIMXRT_TUSB_CONFIG_H
|
||||||
|
|
||||||
|
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
|
||||||
|
|
||||||
|
#define CFG_TUSB_OS (OPT_OS_NONE)
|
||||||
|
|
||||||
|
#define CFG_TUD_CDC (1)
|
||||||
|
#define CFG_TUD_CDC_RX_BUFSIZE (256)
|
||||||
|
#define CFG_TUD_CDC_TX_BUFSIZE (256)
|
||||||
|
|
||||||
|
#endif // MICROPY_INCLUDED_MIMXRT_TUSB_CONFIG_H
|
||||||
|
|
@ -0,0 +1,114 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Damien P. George
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "tusb.h"
|
||||||
|
|
||||||
|
#define USBD_VID (0xf055)
|
||||||
|
#define USBD_PID (0x9802)
|
||||||
|
|
||||||
|
#define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
|
||||||
|
#define USBD_MAX_POWER_MA (250)
|
||||||
|
|
||||||
|
#define USBD_ITF_CDC (0) // needs 2 interfaces
|
||||||
|
#define USBD_ITF_MAX (2)
|
||||||
|
|
||||||
|
#define USBD_CDC_EP_CMD (0x81)
|
||||||
|
#define USBD_CDC_EP_OUT (0x02)
|
||||||
|
#define USBD_CDC_EP_IN (0x82)
|
||||||
|
#define USBD_CDC_CMD_MAX_SIZE (8)
|
||||||
|
|
||||||
|
#define USBD_STR_0 (0x00)
|
||||||
|
#define USBD_STR_MANUF (0x01)
|
||||||
|
#define USBD_STR_PRODUCT (0x02)
|
||||||
|
#define USBD_STR_SERIAL (0x03)
|
||||||
|
#define USBD_STR_CDC (0x04)
|
||||||
|
|
||||||
|
// Note: descriptors returned from callbacks must exist long enough for transfer to complete
|
||||||
|
|
||||||
|
static const tusb_desc_device_t usbd_desc_device = {
|
||||||
|
.bLength = sizeof(tusb_desc_device_t),
|
||||||
|
.bDescriptorType = TUSB_DESC_DEVICE,
|
||||||
|
.bcdUSB = 0x0200,
|
||||||
|
.bDeviceClass = TUSB_CLASS_MISC,
|
||||||
|
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
|
||||||
|
.bDeviceProtocol = MISC_PROTOCOL_IAD,
|
||||||
|
.bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
|
||||||
|
.idVendor = USBD_VID,
|
||||||
|
.idProduct = USBD_PID,
|
||||||
|
.bcdDevice = 0x0100,
|
||||||
|
.iManufacturer = USBD_STR_MANUF,
|
||||||
|
.iProduct = USBD_STR_PRODUCT,
|
||||||
|
.iSerialNumber = USBD_STR_SERIAL,
|
||||||
|
.bNumConfigurations = 1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t usbd_desc_cfg[USBD_DESC_LEN] = {
|
||||||
|
TUD_CONFIG_DESCRIPTOR(USBD_ITF_MAX, USBD_STR_0, USBD_DESC_LEN,
|
||||||
|
TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, USBD_MAX_POWER_MA),
|
||||||
|
|
||||||
|
TUD_CDC_DESCRIPTOR(USBD_ITF_CDC, USBD_STR_CDC, USBD_CDC_EP_CMD,
|
||||||
|
USBD_CDC_CMD_MAX_SIZE, USBD_CDC_EP_OUT, USBD_CDC_EP_IN, CFG_TUD_CDC_RX_BUFSIZE),
|
||||||
|
};
|
||||||
|
|
||||||
|
static const char *const usbd_desc_str[] = {
|
||||||
|
[USBD_STR_MANUF] = "MicroPython",
|
||||||
|
[USBD_STR_PRODUCT] = "Board in FS mode",
|
||||||
|
[USBD_STR_SERIAL] = "000000000000", // TODO
|
||||||
|
[USBD_STR_CDC] = "Board CDC",
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint8_t *tud_descriptor_device_cb(void) {
|
||||||
|
return (const uint8_t *)&usbd_desc_device;
|
||||||
|
}
|
||||||
|
|
||||||
|
const uint8_t *tud_descriptor_configuration_cb(uint8_t index) {
|
||||||
|
(void)index;
|
||||||
|
return usbd_desc_cfg;
|
||||||
|
}
|
||||||
|
|
||||||
|
const uint16_t *tud_descriptor_string_cb(uint8_t index) {
|
||||||
|
#define DESC_STR_MAX (20)
|
||||||
|
static uint16_t desc_str[DESC_STR_MAX];
|
||||||
|
|
||||||
|
uint8_t len;
|
||||||
|
if (index == 0) {
|
||||||
|
desc_str[1] = 0x0409; // supported language is English
|
||||||
|
len = 1;
|
||||||
|
} else {
|
||||||
|
if (index >= sizeof(usbd_desc_str) / sizeof(usbd_desc_str[0])) {
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
const char *str = usbd_desc_str[index];
|
||||||
|
for (len = 0; len < DESC_STR_MAX - 1 && str[len]; ++len) {
|
||||||
|
desc_str[1 + len] = str[len];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// first byte is length (including header), second byte is string type
|
||||||
|
desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2 * len + 2);
|
||||||
|
|
||||||
|
return desc_str;
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue