The poll_obj_t instances have their pollfd field point into this
allocation. So if re-allocating results in a move, we need to update the
existing poll_obj_t's.
Update the test to cover this case.
Fixes issue #12887.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This adds support to stm32's mboot for the Microsoft WCID USB 0xee string
and Compatible ID Feature Descriptor. This allows the USB device to
automatically set the default USB driver, so that when the device is
plugged in Windows will assign the winusb driver to it. This means that
USB DFU mode can be used without installing any drivers.
For example this page will work (allow the board to be updated over DFU)
with zero install: https://devanlai.github.io/webdfu/dfu-util/
Tested on Windows 10, Windows can read the 0xee string correctly, and
requests the second special descriptor, which then configures the USB
device to use the winusb driver.
Signed-off-by: Damien George <damien@micropython.org>
It looks like these never worked and there are no tests for this
functionality. Furthermore, CPython doesn't support this.
Fixes#12995.
Signed-off-by: Damien George <damien@micropython.org>
This gets back the old heap-size behaviour on ESP32, before auto-split-heap
was introduced: after the heap is grown one time the size is 111936 bytes,
with about 40k left for the IDF. That's enough to start WiFi and do a
HTTPS request.
Signed-off-by: Damien George <damien@micropython.org>
There are two main changes here to improve the calculation of the size of
the next heap area when automatically expanding the heap:
- Compute the existing total size by counting the total number of GC
blocks, and then using that to compute the corresponding number of bytes.
- Round the bytes value up to the nearest multiple of BYTES_PER_BLOCK.
This makes the calculation slightly simpler and more accurate, and makes
sure that, in the case of growing from one area to two areas, the number
of bytes allocated from the system for the second area is the same as the
first. For example on esp32 with an initial area size of 65536 bytes, the
subsequent allocation is also 65536 bytes. Previously it was a number that
was not even a multiple of 2.
Signed-off-by: Damien George <damien@micropython.org>
Add new board Silicognition RP2040-Shim, RP2040 with 4 MB of flash
and W5500 drivers included and configured by default for use with
the Silicognition PoE-FeatherWing.
Co-authored-by: Matt Trentini <matt.trentini@gmail.com>
Signed-off-by: Patrick Van Oosterwijck <patrick@silicognition.com>
Some boards have multiple options for these pins, and they don't want to
allow users to initialize a port without explicitly specifying pin numbers.
Signed-off-by: Paul Grayson <paul@pololu.com>
esp8266 doesn't need ets task because the notify is now scheduled (see
commits 7d57037906 and
c60caf1995 for relevant history).
Signed-off-by: Damien George <damien@micropython.org>
In "cat" mode, output was written to a file named "out", then moved to the
location of the real output file. There was no reason for this.
While makeqstrdefs.py does make an effort to not update the timestamp on an
existing output file that has not changed, the intermediate "out" file
isn't part of the that process.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
In "cat" mode a "$output_file.hash" file is checked to see if the hash of
the new output is the same as the existing, and if so the output file isn't
updated.
However, it's possible that the output file has been deleted but the hash
file has not. In this case the output file is not created.
Change the logic so that a hash file is considered stale if there is no
output file and still create the output.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
These are produced by the "cat" command to makeqstrdefs.py, to allow it to
not update unchanged files. cmake doesn't know about them and so they are
not removed on a "clean".
This triggered a bug in makeqstrdefs.py where it would not recreate a
deleted output file (which is removed by clean) if a stale hash file with a
valid hash still existed.
Listing them as byproducts will cause them to be deleted on clean.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Add `load_cert_chain`, `load_verify_locations`, `get_ciphers` and
`set_ciphers` SSLContext methods in ssl library, and update asyncio
`open_connection` and `start_server` methods with ssl support.
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
This adds asyncio ssl support with SSLContext and the corresponding
tests in `tests/net_inet` and `tests/multi_net`.
Note that not doing the handshake on connect will delegate the handshake to
the following `mbedtls_ssl_read/write` calls. However if the handshake
fails when a client certificate is required and not presented by the peer,
it needs to be notified of this handshake error (otherwise it will hang
until timeout if any). Finally at MicroPython side raise the proper
mbedtls error code and message.
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
Fixes two issues:
- None should not be allowed in the list, otherwise the corresponding entry
in ciphersuites[i] will have an undefined value.
- The terminating 0 needs to be put in ciphersuites[len].
Signed-off-by: Damien George <damien@micropython.org>
Changes are:
- use ssl.SSLContext.wrap_socket instead of ssl.wrap_socket
- disable check_hostname and call load_default_certs() where appropriate,
to get CPython to run the tests correctly
- pass socket.AF_INET to getaddrinfo and socket.socket(), to force IPv4
- change tests to use github.com instead of google.com, because certificate
validation was failing with google.com
Signed-off-by: Damien George <damien@micropython.org>
And only enable this method when the relevant feature is available in
mbedtls. Otherwise, if mbedtls doesn't support getting the peer
certificate, this method always returns None and it's confusing why it does
that. It's better to remove the method altogether, so the error trying to
use it is more obvious.
Signed-off-by: Damien George <damien@micropython.org>
This commit adds:
1) Methods to SSLContext class that match CPython signature:
- `SSLContext.load_cert_chain(certfile, keyfile)`
- `SSLContext.load_verify_locations(cafile=, cadata=)`
- `SSLContext.get_ciphers()` --> ["CIPHERSUITE"]
- `SSLContext.set_ciphers(["CIPHERSUITE"])`
2) `sslsocket.cipher()` to get current ciphersuite and protocol
version.
3) `ssl.MBEDTLS_VERSION` string constant.
4) Certificate verification errors info instead of
`MBEDTLS_ERR_X509_CERT_VERIFY_FAILED`.
5) Tests in `net_inet` and `multi_net` to test these new methods.
`SSLContext.load_cert_chain` method allows loading key and cert from disk
passing a filepath in `certfile` or `keyfile` options.
`SSLContext.load_verify_locations`'s `cafile` option enables the same
functionality for ca files.
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
Also, IDF v5.1.2 is now supported, just not used by default.
IDF v5.0.2 still builds but we cannot guarantee continued support for this
version moving forward.
Signed-off-by: IhorNehrutsa <IhorNehrutsa@gmail.com>
Disable unused EC curves and default certificate bundle which is not
implemented in MicroPython. This reduces the firmware size significantly.
This follows commit 68f166dae9.
Signed-off-by: Carlos Gil Gonzalez <carlosgilglez@gmail.com>
So that ports don't need to specify each of these files, they can simply
refer to the appropriate make/cmake variable.
Signed-off-by: Damien George <damien@micropython.org>
Necessary to get coverage of the new event functions.
Deletes the case that called usleep(delay) for mp_hal_delay_ms(), it seems
like this wouldn't have ever happened anyhow (MICROPY_EVENT_POOL_HOOK is
always defined for the unix port).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This is necessary to avoid watchdog timeout in long i2c.scan(), as
previously machine_i2c.c would call MICROPY_EVENT_POLL_HOOK if
MICROPY_EVENT_POLL_HOOK_FAST was not available.
Compared to previous implementation, this implementation removes the
ets_event_poll() function and calls the SDK function ets_loop_iter() from
MICROPY_INTERNAL_EVENT_HOOK instead. This allows using the port-agnostic
functions in more places.
There is a small behaviour change, which is that the event loop gets
iterated in a few more places (i.e. anywhere that mp_event_handle_nowait()
is called). However, this looks like maybe only modselect.c - and is
probably good to process Wi-Fi events in that polling loop.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This should be the equivalent of the previous event poll hook macro.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Previously this was not set, so potential for race conditions in interrupt
handlers this didn't issue SEV. (Which is currently all of them, as far as
I can see.)
Eventually we might be able to augment the interrupt handlers that wake the
main thread to call SEV, and leave the others as-is to suspend the CPU
slightly faster, but this will solve the issue for now.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit changes all uses in the rp2 port, and drivers that are
optionally supported by that port.
The old MICROPY_EVENT_POLL_HOOK and MICROPY_EVENT_POLL_HOOK_FAST macros are
no longer used for rp2 builds and are removed (C user code will need to be
changed to suit).
Also take the opportunity to change some timeouts that used 64-bit
arithmetic to 32-bit, to hopefully claw back a little code size.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
See previous commit for details of these functions. As of this commit,
these still call the old hook macros on all ports.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
These are intended to replace MICROPY_EVENT_POLL_HOOK and
MICROPY_EVENT_POLL_HOOK_FAST, which are insufficient for tickless ports.
This implementation is along the lines suggested here:
https://github.com/micropython/micropython/issues/12925#issuecomment-1803038430
Currently any usage of these functions expands to use the existing hook
macros, but this can be switched over port by port.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Jim Mussared
Damien George
Patrick Van Oosterwijck
Paul Grayson
Trent Piepho
Elias Wimmer
dependabot[bot]
stijn
Carlosgg
IhorNehrutsa
Ihor Nehrutsa
Angus Gratton