d43019163d
docs: Add i2c keywork arguments only indication.
2015-08-09 19:22:14 +02:00
00c4d6562e
cc3200: Add nic.iwconfig() to set/get WLAN configuration.
...
Changes are based on this post:
https://github.com/micropython/micropython/issues/876#issuecomment-115255551
The constructor can optionally take the same params of iwconfig in
order to configure WiFi when creating the object. Params are
keyworkd only. The WiPy accepts:
- mode (int -> WLAN.AP or WLAN.STA)
- ssdi (string)
- security (int -> WLAN.OPEN, WLAN.WEP, WLAN.WPA, WLAN.WPA2)
- key (string)
- channel (int (1-11))
- antenna (int -> WLAN.INTERNAL, WLAN.EXTERNAL)
2015-08-09 19:22:12 +02:00
c6926c374d
cc3200: Make I2C and SPI API the same as in stmhal.
2015-08-02 20:22:15 +02:00
007878781c
cc3200: Rename pins from GPIO to just GP.
...
This is how the names will be printed on the sticker that goes on top
of the EMI shield. The shorter names also help saving a few bytes of
RAM and ROM.
2015-07-30 00:43:08 +02:00
7693ef3bd6
stmhal: Allow ADC.read_timed to take Timer object in place of freq.
...
This allows a user-specified Timer for the triggering of the ADC read,
mirroring the new behaviour of DAC.write_timed.
Addresses issue #1129 .
2015-07-22 19:41:13 +01:00
abc24c1876
stmhal: Allow DAC.write_timed to take Timer object in place of freq.
...
This allows the DAC to use a user-specified Timer for the triggering
(instead of the default Timer(6)), while still supporting original
behaviour.
Addresses issues #1129 and #1388 .
2015-07-21 23:39:49 +01:00
7463442e58
docs: Update pyb.Accel doc to reflect changes and explain filtered_xyz.
2015-07-08 11:10:51 +01:00
5161239c9f
cc3200: time.sleep() now receives seconds, like CPython.
2015-07-02 17:23:22 +02:00
813b581127
cc3200: Add `Pin.name()` method.
2015-06-28 14:14:22 +02:00
fa1cdb09fc
docs: Fix duplicate label error for network.WLAN.
2015-06-27 13:42:00 +01:00
7c61249ae6
esp8266: Updated documentation for scan() and moved to network
2015-06-17 23:16:28 +03:00
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
05c6fbcae6
esp8266: Fix the documentation for esp.connect() and esp.disconnect()
...
Since the commit that moved those two functions failed to update
the documentation, this is a fix for that.
2015-06-13 23:03:06 +03:00
cfcf47c064
docs: Add initial draft documentation for the WiPy.
...
This makes all common files "port-aware" using the .. only directive.
2015-06-10 23:37:56 +02:00
06e85ecfa6
docs/uctype: Update for constructor argument order changes.
...
Also, other small cleanups/improvements.
2015-06-06 22:58:04 +03:00
3eece29807
docs: Change "Micro Python" to "MicroPython" in all places in docs.
2015-06-04 23:53:26 +01:00
32ce72cb9e
docs/uctypes: Typo fix.
2015-06-02 10:35:06 +03:00
f8bce131c0
docs/uctypes: Fix API description errors.
...
"Structure class" is its descriptor, encoded as a dictionary. Then,
uctypes.struct() instantiates an actual object, and thus requires memory
address.
2015-06-02 10:30:01 +03:00
78ccb44a90
docs: Document esp module for ESP8266.
...
I document as much as I could guess from experiments and reading the
code for the ``esp`` module for the ESP8266 port of Micropython.
For now the tag has to be set manually with -t option when building,
when we have properly split documentation, there will be a separate
config file for esp8266 with that the tag "port_esp8266" set.
To build use:
make SPHINXOPTS="-t port_esp8266" html
2015-05-30 12:49:58 +01:00
3ad94d6072
extmod: Add ubinascii.unhexlify
...
This also pulls out hex_digit from py/lexer.c and makes unichar_hex_digit
2015-05-20 09:29:22 +01:00
0bfc57022d
docs: Document USB_VCP file-like methods.
2015-05-13 20:42:12 +01:00
c7df9c6c47
stmhal: Add os.rename function.
2015-05-12 23:43:11 +01:00
5df81de7af
sthmal/rtc.c: Add calibration() method to get/set RTC fine-tuning value.
2015-05-11 23:48:39 +01:00
dea853d3a3
docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup.
2015-04-21 22:35:17 +01:00
e3cd154317
stmhal: Add support for sending and receiving CAN RTR messages.
2015-04-18 14:53:00 +01:00
7d5e34287c
stmhal: Allow sending CAN messages with timeout=0.
...
Thanks to Henrik Sölver for this patch.
2015-04-16 23:52:43 +01:00
e97dddcdca
docs: Document pyb.main function to set main script.
2015-04-09 10:08:25 +01:00
344057ac50
docs: uctypes: Bullet list formatting fixes.
2015-03-31 01:29:07 +03:00
9d2c0c231c
docs: uctypes: Describe how to instantiate struct objects.
2015-03-31 01:16:14 +03:00
e178ef2520
docs: Add additional example/note for Timer's callback usage.
...
Add example: using named function for the Timer's callback.
Add note: improving traceback inside interrupt timers.
2015-03-30 00:43:04 +01:00
47098efbda
docs: Provide initial documentation for micropython module.
2015-03-30 00:32:29 +01:00
c260836beb
docs: uctypes: Describe bytes_at(), bytearray_at().
2015-03-27 00:19:23 +02:00
ec1b1cf834
docs: uctypes: Describe couple more functions.
2015-03-24 22:42:54 +02:00
b4c9a25eab
stmhal: Add support for quadrature encoder mode to pyb.TimerChannel.
2015-03-09 13:23:14 +00:00
b57b56f293
docs: Update pyb.Timer.rst to fix pulse widths that exceed the period.
2015-03-09 12:14:32 +00:00
4fddbe5ab6
docs: Correct the documentation for math.frexp.
2015-02-23 22:15:11 +00:00
3527085587
pyb.UART.rst: Clean up note about stream protocol support.
2015-02-22 13:36:35 +02:00
77fc276c08
stmhal: For UART, check that baudrate is within 5% of desired value.
...
Also includes documentation about minimum baudrate.
Addresses issue #1090 .
2015-02-22 00:26:49 +00:00
f80f1a7077
stmhal: Add support for CAN rx callbacks.
2015-02-15 03:10:53 +00:00
baafb290ad
stmhal: Add uart.sendbreak() method, to send a break condition.
2015-02-13 19:04:24 +00:00
d39c7aa517
stmhal: Add Python-configurable USB HID mode.
...
Different HID modes can be configured in Python. You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
73533247cb
docs: Fix frequency info for DAC.triangle.
2015-01-20 23:56:10 +00:00
3990dcfcd7
docs: Add note about maximum frequency of busses.
2015-01-08 22:54:26 +00:00
7a0636e80a
docs: Add initial "uctypes" modules docs. WIP.
2015-01-08 00:17:10 +02:00
ddbcc79550
docs: Add quickref info about Servo; improve Servo docs.
2015-01-01 18:00:45 +00:00
7690b13953
stmhal: Add ability to mount custom block device.
2014-12-27 20:20:51 +00:00
a37656c132
docs: Make admonition for CPy-difference use "attention" class.
...
This renders it in yellow/orange box on RTD server.
2014-12-22 13:42:30 +00:00
6d3ae569cf
docs: Add CPy diff note for print_exception; embellish sys.platform.
2014-12-19 22:10:38 +00:00
9642846d71
docs: Define more clearly the behaviour of LED methods.
...
Addresses issue #1006 .
2014-12-16 11:55:46 +00:00
6c3fc74656
docs: Add sys.print_exception().
2014-12-10 20:31:38 +02:00
b66a31c42c
stmhal: Allow SPI.init to specify prescaler directly; improve SPI docs.
2014-12-08 21:34:07 +00:00
008251180d
stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
...
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00
41c07d5b80
docs: uzlib: Typo fix.
2014-12-05 02:08:30 +02:00
adf4c4cea8
docs: Add quick docs for uzlib.
2014-12-05 00:40:35 +02:00
c0b3d4540b
docs: Update network docs to reflect changes to code.
2014-12-04 19:43:56 +00:00
3a5352b483
docs: Add skeleton docs for ure module.
2014-12-04 00:07:00 +02:00
d8fd3103fa
docs: Add quick docs for ubinascii.
2014-12-02 01:51:56 +02:00
d96a916405
docs: Add quick docs for uhashlib.
2014-12-02 00:53:19 +02:00
7f0699eedf
docs: Sort "micro-library" module list alphabetically.
2014-12-01 20:42:38 +02:00
d8c2b2a1c4
Update documentation for the CAN class
2014-11-30 01:04:56 +00:00
19fb1b4dd7
stmhal: Add USB_VCP.setinterrupt method, to disable CTRL-C.
2014-11-29 15:23:21 +00:00
9aae41121b
Update uheapq.rst
...
Erratum in froh.
2014-11-28 17:32:29 +00:00
d1b42d7b51
stmhal: Improve CAN init so that it can take sjw, bs1, bs2 args.
...
Also update docs to explain how CAN baudrate is determined.
2014-11-15 21:28:14 +00:00
ca0b0cb83f
Document parameter "data" of i2c.mem_read() more clear
...
Hi,
i would like to add a little clarification to the parameter "data" of i2c.mem_read(): I misunderstood
``data`` can be an integer or a buffer to read into
as "i can give a integer variable to read a integer into" . This pull-request adds the following clarification:
``data`` can be an integer (number of bytes to read) or a buffer to read into
Thanks for your great work!
Best wishes,
Matthias
2014-11-15 18:31:37 +00:00
d8474d3617
docs: select: Describe extra details.
2014-11-09 01:48:05 +02:00
8e701604d5
docs: Add links from quickref to pyb classes.
2014-11-04 18:25:20 +00:00
bc0bc764fc
docs: Add debounce tutorial; order Pin methods; add pull resistor info.
2014-11-04 18:07:06 +00:00
6e6dfdc56b
docs: Make custom index page; add more docs.
2014-11-02 23:37:02 +00:00
38bd762121
stmhal: Improve pyb.freq to allow 8 and 16MHz (not usable with USB).
...
Also restrict higher frequencies to have a VCO_OUT frequency below
432MHz, as specified in the datasheet.
Docs improved to list allowed frequencies, and explain about USB
stability.
2014-11-02 15:10:15 +00:00
a58713a899
docs: Cleanup and update some docs.
2014-10-31 22:21:37 +00:00
109c1de015
py: Make gc.enable/disable just control auto-GC; alloc is still allowed.
...
gc.enable/disable are now the same as CPython: they just control whether
automatic garbage collection is enabled or not. If disabled, you can
still allocate heap memory, and initiate a manual collection.
2014-10-31 21:30:46 +00:00
4029f51842
stmhal: Fix UART so bits counts number of data bits, not incl parity.
...
Addresses issue #950 .
2014-10-31 20:28:10 +00:00
88d3054ac0
docs: Import documentation from source-code inline comments.
...
The inline docs (prefixed with /// in .c files) have been converted to
RST format and put in the docs subdirectory.
2014-10-31 01:37:19 +00:00
Daniel Campora
Damien George
Bill Owens
Radomir Dopieralski
Paul Sokolovsky
Dave Hylands
Steve Zatz
blmorris
Henrik
Ivan Pejić
Peter Hinch
inaugurator
Matthias