mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,338 Commits 4 Branches 3 Tags 611 MiB
Commit Graph

7 Commits

Author SHA1 Message Date
Paul Sokolovsky 97a0846af9 stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting. 
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
 2016-02-06 15:07:01 +02:00
Damien George f7c4f9a640 stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx. 
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1.  Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS.  This makes it the same as how I2C is configured.
 2015-12-12 15:02:02 +00:00
Dave Hylands 872f9af6ae stmhal: Use CMSIS_MCU definition from mpconfigboard.mk 
This needs to land afte #1407 lands, since #1407 is where
the CMSIS_MCU was defined.
 2015-08-07 08:54:14 +01:00
Dave Hylands be66a9ecf6 stmhal: Generate modstm constants per build 
This causes unnecessary constants to no longer be generated.
Some constants (like UART_BRR) are different between the F4 and F7
 2015-08-07 08:46:43 +01:00
Damien George a39df51d8a stmhal: Update Makefile and board configs to compile with relocated hal. 2015-07-20 12:30:18 +01:00
Eero af Heurlin 2378be4e93 stmhal: Allow to configure UART pins completely via mpconfigboard.h. 2015-05-03 13:48:26 +01:00
Damien George 90e6d0c2ac stmhal: Add support for Espruino Pico board. 
To build:

make BOARD=ESPRUINO_PICO

To deploy: short the BOOT0/BTN contact on the back of the board (eg by
drawing over it with a graphite pencil), then hold down BTN while
inserting the board into the USB port.  The board should then enter DFU
mode, and the firmware can be downloaded using:

make BOARD=ESPRUINO_PICO deploy
 2015-04-18 21:40:59 +01:00