Commit 7ea06a3e26 moved the
`rmt_write_items()` call to fix RMT looping for ESP32-S3, but broke it for
the other ESP32s. This commit conditionally compiles the location of that
call.
Signed-off-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Prior to this change, after calling connect() the status() method for the
STA interface would either return STAT_GOT_IP or STAT_CONNECTION. The
latter would be returned because wifi_sta_connect_requested==true and
conf_wifi_sta_reconnects==0 by default. As such there was no way to know
anything about errors when attempting to connect, such as a bad password.
Now, status() can return STAT_NO_AP_FOUND and STAT_WRONG_PASSWORD when
those conditions are met.
Fixes issue #12930.
Signed-off-by: IhorNehrutsa <Ihor.Nehrutsa@gmail.com>
In ESP-IDF, enabling SPIRAM in menuconfig sets some Kconfig options:
- "Wi-Fi Cache TX Buffers" enabled. By default this tries to allocate 32 of
these when Wi-Fi is initialised, which requires 54,400 bytes of free heap.
- Switches "Type of WiFi TX buffers" from Dynamic to Static. This
pre-allocates all of the Wi-Fi transmit buffers.
Not a problem if PSRAM is initialised, but it's quite a lot of RAM if PSRAM
failed to initialise! As we use the same config for PSRAM & no-PSRAM builds
now, this either causes Wi-Fi to fail to initialise (seen on S2) or will
eat quite a lot of RAM.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
In commit 7c929d44 the console UART was changed to use the UART HAL.
Starting the UART HAL will change the UART clock from whatever it was
already configured at to UART_SCLK_DEFAULT. There is no "initialize at
existing settings" option.
This clock doesn't work with DFS.
The ESP-IDF code already takes this into account, and when DFS is enabled
it will configure the console UART to use the correct platform-specific
clock that will work with DFS.
The UART HAL init undoes this and sets it back to default.
This change will query the clock before the HAL init, then use the HAL
function to restore it back. Thus keeping the clock at the "correct"
value, which depends on platform, DFS status, and so on.
The clock frequency will be found using the UART driver function ESP-IDF
code uses for this. The existing code hard-coded a path that worked if the
clock was the APB clock and would fail otherwise.
The UART_NUM_0 define is removed because driver/uart.h already provides
this same macro.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The behaviour described in the docs was not correct for either port.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
At some point the config changed such that no messages above Error level
were compiled into the final binary.
Fixes issue #12815.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
If the hard socket limit (default 16) is reached then it's possible that
socket allocation fails but garbage collection would allow it to succeed.
Perform a GC pass and try again before giving up, similar to the logic
elsewhere in MicroPython that tries a GC pass before raising MemoryError.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
LWIP doesn't implement a timeout for blocking connect(), and such a timeout
is not required by POSIX. However, CPython will use the socket timeout for
blocking connect on most platforms. The "principle of least surprise"
suggests we should support it on ESP32 as well (not to mention it's
useful!).
This provides the additional improvement that external exceptions (like
KeyboardInterrupt) are now handled immediately if they happen during
connect(). Previously Ctrl-C would not terminate a blocking connect until
connect() returned, but now it will.
Fixes issue #8326.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit changes the Arduino board identifiers to correspond to their
official names. This helps to identify boards at runtime. At the moment
the Arduino Portenta H7 is reported as PORTENTA which is unfortunate as now
there is another Portenta board (Portenta C33) supported in MicroPython.
Also made the other identifiers for flash and network name consistent,
removed the incorrectly used MICROPY_PY_SYS_PLATFORM identifiers, and added
missing MICROPY_PY_NETWORK_HOSTNAME_DEFAULT identifiers.
Boards affected:
- stm32: ARDUINO_PORTENTA_H7, ARDUINO_GIGA, ARDUINO_NICLA_VISION
- renesas-ra: ARDUINO_PORTENTA_C33
- esp32: ARDUINO_NANO_ESP32
- rp2: ARDUINO_NANO_RP2040_CONNECT
Signed-off-by: Sebastian Romero <s.romero@arduino.cc>
Configuration:
- Clock is HSE, CPU runs at 250MHz.
- REPL on USB and UART connected to the ST-Link interface.
- Storage is configured for internal flash memory.
- Three LEDs and one user button.
- Ethernet is enabled.
Signed-off-by: Rene Straub <rene@see5.ch>
Replaces the previous all-zeroes "TODO" serial number.
Requires refactoring the low-level unique_id routine out from modmachine.c.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Change the rp2 and renesas-ra ports to use the helper function.
Saves copy-pasta, at the small cost of one more function call in the
firmware (if not using LTO).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Functionality and code size don't really change, but removes port-specific
code in favour of shared code.
(The MSC implemented in shared/tinyusb depends on some functions in the
pico-sdk, so this change doesn't make this available for samd.)
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
See the commit a00c9d56db for a detailed description of the problem, a
regression introduced in 26d503298.
Same approach here as the linked fix for rp2 (applied unconditionally here
as this port only supports USB-CDC for stdin/stdout).
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The recent change in bcbdee2357 means that
TinyUSB can no longer be run from within a soft (or hard) IRQ handler, ie
when the scheduler is locked. That means that Python code that calls
`print(...)` from within a scheduled function may block indefinitely if the
USB CDC buffers are full.
This commit fixes that problem by explicitly running the TinyUSB stack when
waiting within stdio tx/rx functions.
Signed-off-by: Damien George <damien@micropython.org>
This adds the sync version of the LoRa driver (and the base WL55 driver).
Adds +13.6kiB (212.6 -> 226.2). Limit for this board is 232kiB.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
If you have a variable frequency and pulse width, and you want to optimize
pulse resolution, then you must do a calculation beforehand to ensure you
normalize the array to keep all list values within bound. That calculation
requires RMT.source_freq(), RMT.clock_div(), and this 32767 constant.
Signed-off-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
To create an esp32.RMT() instance with an optimum (i.e. highest resolution)
clock_div is currently awkward because you need to know the source clock
frequency to calculate the best clock_div, but unfortunately that is only
currently available as an source_freq() method on the instance after you
have already created it. So RMT.source_freq() should really be a class
method, not an instance method. This change is backwards compatible for
existing code because you can still reference that function from an
instance, or now also, from the class.
Signed-off-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Previously the TinyUSB task was run in the ISR immediately after the
interrupt handler. This approach gives very similar performance (no change
in CDC throughput tests) but reduces the amount of time spent in the ISR,
and allows TinyUSB callbacks to run in thread mode.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This change:
- Has a small code size reduction.
- Should slightly improve overall performance. The old hook code
seemed to use between 0.1% and 1.6% of the total CPU time doing no-op
calls even when no USB work was required.
- USB performance is mostly the same, there is a small increase in
latency for some workloads that seems to because sometimes the hook
usbd_task() is called at the right time to line up with the next USB host
request. This only happened semi-randomly due to the timing of the hook.
Improving the wakeup latency by switching rp2 to tickless WFE allows the
usbd_task() to run in time for the next USB host request almost always,
improving performance and more than offsetting this impact.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Add a .ico file with common icon image size, created from
vector-logo-2.png, and embed it into the resulting executable.
Signed-off-by: stijn <stijn@ignitron.net>
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings. At this stage only esp32 implements
this class, so the code for the bindings comes from that port.
The documentation is also updated to reflect the esp32's behaviour of
ADCBlock.connect().
Signed-off-by: Damien George <damien@micropython.org>
C99 says that strncmp has UB for either string being NULL, so the
current behavior is technically correct, but it's an easy fix to handle
this case correctly.
7.1.4: "unless explicitly stated otherwise in the detailed
description... if an argument to a function has ...null pointer.. the
behavior is undefined".
7.21.1: "Unless explicitly stated otherwise in the description of a
particular function in this subclause, pointer arguments on such a call
shall still have valid values, as described in 7.1.4".
Also make the same change for the minimal version in bare-arm/lib.c.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Remove port-specific test directories and excluded tests from
tinytest-codegen, and let it read said information from an external file.
This way tinytest-codegen is not limited to always generate tests for the
`qemu-arm` target.
This allows having port-specific test directory and excluded tests for more
than one QEMU bare-metal target.
The `qemu-arm` port Makefile was modified to work with the generator
changes and a tests profile file was added to said port.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Changing the baudrate requires a complete re-configuration of the Sercom
device, which is put into a separate rather large function. This new
machine_uart_set_baudrate() function will be useful for future drivers such
as Bluetooth.
Signed-off-by: robert-hh <robert@hammelrath.com>
Fixes are:
- Only emit ADC table entries for pins that aren't cpu-hidden
(i.e. ignore `X,-Y` rows).
- Only use the P channels on H7.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The main motivation for doing this was to reduce the latency when the
system is woken by a USB interrupt. The best_effort_wfe_or_timeout()
function calls into the pico-sdk dynamic timer framework which sets up a
new dynamic timer instance each time, and then has to tear it down before
continuing after a WFE.
Testing Python interrupt latency, it seems to be improved by about 12us
(from average of 46us to 34us running a Pin IRQ). C-based "scheduled
nodes" should see even lower latency.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This patch ensures that integer channel numbers passed to the ADC
constructor (including temperature sensor) are interpreted as raw
channel numbers, and not cause any GPIO pins to be initialized.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
The FIFO reports not only the bytes read, but also 4 error bits. These were
not checked, leading to NUL value read in case of break and possible
garbage bytes being written on parity/framing error.
This patch addresses the issue that NUL bytes are incorrectly read on
break, and at least provides the boilerplate code and comments for error
handling, that may be implemented in the future.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
Update rtc, machine and powerctrl drivers to support STM32H5 sleep
modes. This makes RTC alarm wakeup working from lightsleep() and
deepsleep().
Changes:
- Determine start reason for machine.reset_cause() in modmachine.c.
- Add proper interrupt clear code in rtc.c.
- Add wakeup functionality in powerctrl_enter_stop_mode(). Remember
and restore voltage scaling level. Restart HSI48 if it was on before
entering sleep mode.
- Clear DBGMCU_CR in SystemClock_Config() as for other variants.
Otherwise debug flags prevent entering sleep mode.
Implementation Notes:
- rtc.c: EXTI_RTSTR1 bits are not present for H5. Code sequence from
G0/G4/L4/WB/WL would be invalid. RTSTR is only defined for external
(GPIO) interrupts. Maybe this is also true for other STM32 variants.
- powerctrl_enter_stop_mode() uses complicated, nested conditionals
to select STM32 variants. To make code slightly better readable,
comment have been added. A non-nested, #if/#elif sequence would
make the code more readable. I leave this to the original authors.
Signed-off-by: Rene Straub <rene@see5.ch>
This fixes the case where e.g.
struct foo_t {
mp_obj_t x;
uint16_t y;
char buf[];
};
will have `sizeof(struct foo_t)==8`, but `offsetof(struct foo_t, buf)==6`.
When computing the size to allocate for `m_new_obj_var` we need to use
offsetof to avoid over-allocating. This is important especially when it
might cause it to spill over into another GC block.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
It's not worth the effort to update these ports to use boardgen.py, but
put a note just in case anyone uses this as a reference for a new port.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This removes previously unused functionality to generate pins_ad_const.h,
as well as the unused handling of pin AF in machine_pin.c.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>