CCaches are scoped per-job.
Uses https://github.com/hendrikmuhs/ccache-action to get desired behaviour
(updating the cache on each run).
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Allows splitting the esp32 job into multiple parts without too much
boilerplate. The matrix is parameterised using the name of the function to
call in tools/ci.sh, to minimise the dependency on GitHub Actions.
This can get esp32 build times down around 3m if IDF is cached already.
If the cache is cold, the cache preparation step on each job can double up
against each other. However, restructuring the workflow to not do this
seems either complex or requires copy-pasting the entire cache step.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Cache is keyed on the ESP-IDF version used in CI, so there shouldn't be any
cache invalidation issues when ESP-IDF version changes.
Restoring from cache takes approx 15s, compared to 2-3m to perform these
steps (ESP-IDF tools install, ESP-IDF clone, ESP-IDF submodule clone) the
first time.
Cache size is approx 1.6GB, the git clone is tweaked as much as possible to
keep the size down.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
- Add config for [tool.ruff.format] to pyproject.toml.
- Update pre-commit to run both ruff and ruff-format (and only check C
files when running codeformat.py)
- Update CI.
- Simplify codeformat.py to remove all the Python-specific logic (just run
"ruff format" directly).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This port is largely unmaintained, has limited features (the only hardware
support is for GPIO and timer, and no machine module), only supports a
small number of Teensy boards, and can be confused with the mimxrt support
for Teensy 4.x.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
This provides a way to enable features and changes slated for MicroPython
2.x, by running `make MICROPY_PREVIEW_VERSION_2=1`. Also supported for
the cmake ports (except Zephyr).
This is an alternative to having a 2.x development branch (or equivalently,
keeping a 1.x release branch). Any feature or change that needs to be
"hidden" until 2.x can use this flag (either in the Makefile or the
preprocessor).
A good example is changing function arguments or other public API features,
in particular to aid in improving consistency between ports.
When `MICROPY_PREVIEW_VERSION_2` is enabled, the REPL banner is amended to
say "MicroPython (with v2.0 preview) vX.Y.Z", and sys.implementation gets a
new field `_v2` set to `True`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit updates the ci script to automatically fetch all upstream if
the common commit hasn't been found; this should preserve the speed of CI
checks for most PR's, and use a reliable but slow fetch if needed for older
ones.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Also provide a basic README.md for dynamic native modules.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
PICO might not always be a unique name across all ports, and the
convention generally for other boards is to do VENDOR_BOARD.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This merges the existing GENERIC, GENERIC_1M, and GENERIC_512k boards
into variants of the new ESP8266_GENERIC board (renamed from GENERIC so
as not to clash with other ports).
Also moves the generation of the "OTA" variant (previously generated by
autobuild/build-esp8266-latest.sh) into the variant.
Following the convention established for the WEACTSTUDIO rp2 board, the
names of the variants are FLASH_1M and FLASH_512K (but rename the .ld files
to use MiB and kiB).
Updates autobuild to build esp8266 firmware the same way as other ports.
This requires renaming the output from firmware-combined.bin to just
firmware.bin.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Board names need to be unique across ports, and GENERIC clashes with
the ESP8266 (which will be renamed to ESP8266_GENERIC).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This will be replaced with a new deflate module providing the same
functionality, with an optional frozen Python wrapper providing a
replacement zlib module.
binascii.crc32 is temporarily disabled.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This change enables the ULP (FSM) for all ESP32 variants rather than
requiring it to be enabled for each board specifically.
It also ensures the correct header file is included for each variant.
Lastly, it updates the IDF version we're builing against to v4.4.2, as that
version contains important fixes to make the ULP actually work on S2/S3
chips. See: https://github.com/espressif/esp-idf/commit/a0e3d48
Signed-off-by: Wilko Nienhaus <wilko.nienhaus@gmail.com>
The automatic code size build and GitHub comment is a really useful
feature. This commit adds a few more builds to it (mimxrt and samd).
Signed-off-by: Damien George <damien@micropython.org>
Changes in this commit:
- Change MICROPY_HW_BOARD_NAME definition to match the product name.
- Rename board folder's name to match the product name style.
- Change related files like Makefile, document descriptions, test cases, CI
and tools.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
Now that the code-size-check CI action gives a nice report (as a comment)
on the code size difference, it's possible to have a few more ports
reported there. In this commit, unix, stm32 and rp2 are added. Unix
represents non-MCU builds, and stm32 and rp2 represent ARM-based builds,
for ports that have lots of features enabled.
Signed-off-by: Damien George <damien@micropython.org>
The zephyr CI takes the most time out of all CI jobs, so remove the
standard qemu_x86 build to speed it up. The remaining builds should still
cover enough cases to catch errors.
Signed-off-by: Damien George <damien@micropython.org>
This applies to nimble, btstack, axtls, mbedtls, lwip.
Rather than having the ports individually manage GIT_SUBMODULES for these
components, make extmod.mk append them when the relevant feature is
enabled.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
frozentest.mpy was previously duplicated in ports/minimal and
ports/powerpc.
This needs to be re-generated on every .mpy version increase, so might as
well just have a single copy of it.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a no-op for coverage and minimal.
The standard and dev variants have been merged and enable the same feature
set as a typical bare-metal board. And remove the CI for the dev build.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
When iterating over filesystem/folders with os.iterdir(), an open file
(directory) handle is used internally. Currently this file handle is only
closed once the iterator is completely drained, eg. once all entries have
been looped over / converted into list etc.
If a program opens an iterdir but does not loop over it, or starts to loop
over the iterator but breaks out of the loop, then the handle never gets
closed. In this state, when the iter object is cleaned up by the garbage
collector this open handle can cause corruption of the filesystem.
Fixes issues #6568 and #8506.
It has been about 8 years since support for this chip was added. Reasons
to remove it are:
- It is no longer easy to obtain this part.
- There are now many other options for WiFi.
- It's not a good use of developer time to maintain it.
Signed-off-by: Damien George <damien@micropython.org>
- Add lib/wiznet5k into the 'make submodules' step.
- Split the stm32 builds for wiznet5k and cc3k.
- Run 'make .... clean' after making the wiznet5k build.
The executable now lives in the build directory, and since the build
directory already contains the variant name there is no need to also add
it to the executable.
Signed-off-by: Damien George <damien@micropython.org>
Binaries built using the Make build system now no longer appear in the
working directory of the build, but rather in the build directory. Thus
some paths had to be adjusted.
The CI scripts were using a PPA to get a backported version of uncrustify
on Ubuntu 20.04. However, this causes CI to intermittently fail due to
connection issues to launchpad.net or the key server.
Ubuntu 22.04 has a newer version of uncrustify removing the need for the
PPA. Ubuntu 22.04 is now in beta on GitHub actions, so it can be used.
Signed-off-by: David Lechner <david@pybricks.com>
Updates the Zephyr port build instructions and CI to use the latest Zephyr
release tag.
Tested on frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This tests the build when -O2 is used, which can lead to additional
compiler analysis and warnings.
Signed-off-by: Damien George <damien@micropython.org>
Damien George
Angus Gratton
Jim Mussared
Andrew Leech
iabdalkader
Wilko Nienhaus
Takeo Takahashi
robert-hh
Nicholas H.Tollervey
Daniel Jour
David Lechner
Maureen Helm