Commit Graph

569 Commits

Author SHA1 Message Date
stijn 49c47da804 Fix errors after enabling -Wpointer-arith 2014-10-29 15:42:38 +00:00
stijn 4e54c876a7 Add -Wpointer-arith flag to prevent problems with pointer arithmetic on void* 2014-10-29 10:29:09 +01:00
Damien George e4e52f5370 stmhal: Allow DAC object to be initialised from a pin.
Eg: dac = DAC(Pin.board.X5)
2014-10-26 21:46:06 +00:00
Damien George bc1488a05f stmhal: Improve REPL control codes; improve pyboard.py script.
Improvements are:

2 ctrl-C's are now needed to truly kill running script on pyboard, so
make CDC interface allow multiple ctrl-C's through at once (ie sending
b'\x03\x03' to pyboard now counts as 2 ctrl-C's).

ctrl-C in friendly-repl can now stop multi-line input.

In raw-repl mode, use ctrl-D to indicate end of running script, and also
end of any error message.  Thus, output of raw-repl is always at least 2
ctrl-D's and it's much easier to parse.

pyboard.py is now a bit faster, handles exceptions from pyboard better
(prints them and exits with exit code 1), prints out the pyboard output
while the script is running (instead of waiting till the end), and
allows to follow the output of a previous script when run with no
arguments.
2014-10-26 15:39:22 +00:00
Damien George 480a7ce58f stmhal: Change SPI phase spec to 0,1 to match standard conventions.
Was 1 or 2, now 0 or 1 (respectively).  0 means sample MISO on first
edge, 1 means sample on second edge.

Addresses issue #936.
2014-10-26 13:54:31 +00:00
Damien George 124df6f8d0 py: Add mp_pending_exception global variable, for VM soft interrupt.
This allows to implement KeyboardInterrupt on unix, and a much safer
ctrl-C in stmhal port.  First ctrl-C is a soft one, with hope that VM
will notice it; second ctrl-C is a hard one that kills anything (for
both unix and stmhal).

One needs to check for a pending exception in the VM only for jump
opcodes.  Others can't produce an infinite loop (infinite recursion is
caught by stack check).
2014-10-25 23:37:57 +01:00
Damien George d7353fe6fe stmhal: Change USB PID when in CDC+HID mode.
This gets CDC+HID working on Windows, since it needs a different PID for
a different USB configuration.

Thanks to tmbinc and dhylands.
2014-10-25 22:55:07 +01:00
Damien George 8204db6831 stmhal: Change fresh boot.py and main.py to use \r\n newlines.
This is so it's compatible with Windows.
2014-10-25 01:14:39 +01:00
Damien George 21dfd207ca stmhal: Fill in USB class/subclass/proto for CDC+HID device.
Also change HID device from keyboard to mouse (should have been mouse
all along).
2014-10-25 01:14:39 +01:00
Felix Domke a64d5d67b5 USB CDC ACM: populate bFunction{Class,SubClass,Protocol} in the interface association descriptor 2014-10-25 01:14:39 +01:00
Damien George e294bee45b stmhal: Use stream's readinto. 2014-10-24 11:19:01 +00:00
Damien George e5b1b7348a stmhal: Fix pin af definition: TIM2_CH1_ETR -> TIM2_CH1/TIM2_ETR. 2014-10-23 22:07:24 +01:00
Damien George 185cb0d943 stmhal: Use OSError with POSIX error code for HAL errors.
Addresses issue #921.
2014-10-23 14:25:32 +01:00
Damien George dd4f4530ab py: Add builtin memoryview object (mostly using array code). 2014-10-23 13:34:35 +01:00
Damien George f5d69794a8 extmod: Add uheapq module. 2014-10-22 23:20:15 +01:00
Dave Hylands 842210f53a Add pydfu.py to the micropython tree. Use dfu_util bgy default
You can do:

make USE_PYDFU=1 deploy

to use pydfu.py
2014-10-22 20:18:38 +01:00
Damien George efa04eafd3 stmhal: Add MMA_INT/PB2 to available pins on PYBV10.
This allows you to register ExtInt on the MMA interrupt pin.
2014-10-22 19:31:27 +01:00
Dave Hylands d46a822262 Fixed TIM2_CH1 definition.
TIM2_CH1_ETR is really bundling 2 functions to the same pin:
TIM2_CH1 (where its used as a channel)
TIM2_ETR (where iss used as an external trigger).

I fixed most of these a while back, but it looks like I missed this one.
2014-10-22 19:16:51 +01:00
Damien George 3be6984b8f stmhal: Don't return SystemExit value from parse_compile_execute.
There is no need, since we don't (currently) use the value.
2014-10-22 19:14:20 +01:00
Dave Hylands 8d62bbd46a Add pyb.hard_reset, and make sys.exit() or raise SystemExit do a soft reset. 2014-10-22 19:14:20 +01:00
Damien George 3e42570538 stmhal: Change cc3k.recv to only make 1 call to underlying recv().
Also make cc3k.send and cc3k.recv independent functions (not wrapped by
stream write/read).  Also make wiznet5k.recv more memory efficient.

This might address issue #920.
2014-10-22 01:10:53 +01:00
Damien George 481d714bd5 stmhal: Overhaul UART class to use read/write, and improve it.
UART object now uses a stream-like interface: read, readall, readline,
readinto, readchar, write, writechar.

Timeouts are configured when the UART object is initialised, using
timeout and timeout_char keyword args.

The object includes optional read buffering, using interrupts.  You can set
the buffer size dynamically using read_buf_len keyword arg.  A size of 0
disables buffering.
2014-10-21 22:15:20 +01:00
Damien George b1e217222e Merge pull request #922 from swegener/for-upstream
stmhal: Set entry point for ELF binary debugging
2014-10-21 20:58:29 +01:00
stijn 2fe4cf7761 Implement kwargs for builtin open() and _io.FileIO
This makes open() and _io.FileIO() more CPython compliant.
The mode kwarg is fully iplemented.
The encoding kwarg is allowed but not implemented; mainly to allow
the tests to specify encoding for CPython, see #874
2014-10-21 22:10:01 +03:00
Sven Wegener abf0f07a5a stmhal: Set entry point for ELF binary debugging
When loading the ELF binary to the board with a debugger, the debugger
needs to know at which point to start executing the code. Currently the
entry point defaults to the start of the .text section.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2014-10-21 16:48:32 +02:00
Damien George 072bd07f17 stmhal: Add retry to SD card init.
This fixed an issue with a certain SD card sometimes not initialising
first time round.  See issue #822 for related, and thanks to
@iabdalkader for the idea.
2014-10-20 00:04:27 +01:00
Paul Sokolovsky 1a55b6a787 unix, stmhal: Implement file.readinto() method.
Also, usocket.readinto(). Known issue is that .readinto() should be available
only for binary files, but micropython uses single method table for both
binary and text files.
2014-10-18 22:44:07 +03:00
Damien George 4b71c056ef moduzlib: Fix fn prototype and some code style; use it in stmhal port. 2014-10-12 23:35:38 +01:00
Damien George 50062587c7 stmhal: Oops: rename mod files in Makefile. 2014-10-12 20:35:21 +01:00
Damien George 136b5cbd76 stmhal: Rename module files to keep consistency with module name. 2014-10-12 20:24:55 +01:00
Damien George 0107e90328 stmhal: Enable module weak links.
os, time, select modules are now prefixed with u, but are still
available (via weak links) as their original names.

ure and ujson now available as re and json via weak links.
2014-10-12 20:23:47 +01:00
Damien George dd5ee9ff9c stmhal: Enable ure module (tests pass on pyboard). 2014-10-11 18:55:12 +01:00
Dave Hylands 1c795445b3 Add support for complimentary channel output and deadtime.
This patch enables output on the complimentary channels (TIMx_CHyN).
For timers 1 and 8, deadtime can also be inserted when the channels
transition. For the pyboard, TIM8_CH1/CH1N and TIM8_CH2/CH2N can
take advantage of this.
2014-10-10 13:54:03 -07:00
Damien George 9b6617ea8b stmhal: Add pyb.stop() and pyb.standby() functions. 2014-10-09 19:02:47 +01:00
Damien George 9bf5f2857d py: Add further checks for failed malloc in lexer init functions. 2014-10-09 16:53:37 +01:00
Dave Hylands 3556e45711 Allow real memory errors (from locked gc) to be reported with traceback. 2014-10-07 08:07:49 -07:00
Damien George fec70ad369 stmhal: Remove long-obsolete pybwlan.[ch] files from old CC3k driver. 2014-10-06 15:40:25 +00:00
Damien George d03c681608 stmhal: Use mp_uint_t where appropriate.
Found these by compiling stmhal with mp_uint_t of type uint32_t instead
of unsigned int.  This actually makes a difference to the code, but just
a curiosity.
2014-10-05 21:51:54 +01:00
Damien George a91ac2011f py: Make compiler return a proper exception on SyntaxError. 2014-10-05 19:01:34 +01:00
Damien George 6dba992182 stmhal: Add config option to disable/enable CAN driver. 2014-10-05 18:05:26 +01:00
Damien George ba0383a8c7 stmhal, timer: Fix timer.chanel so mode can be a keyword. 2014-10-05 17:52:45 +01:00
Damien George 55f68b3ce8 stmhal, timer: Improve accuracy of freq computation. 2014-10-05 17:52:45 +01:00
Damien George 97ef94df83 stmhal, timer: Set freq from float; get timer source freq.
Timers now have the following new features:
- can init freq using floating point; eg tim.init(freq=0.1)
- tim.source_freq() added to get freq of timer clock source
- tim.freq() added to get/set freq
- print(tim) now prints freq
2014-10-05 17:52:44 +01:00
Damien George 24119176e7 stmhal: Allow pyb.freq() function to change SYSCLK frequency.
Eg pyb.freq(120000000) sets the CPU to 120MHz.  The frequency can be set
at any point in the code, and can be changed as many times as you like.
Note that any active timers will need to be reconfigured after a freq
change.

Valid range is 24MHz to 168MHz (but not all freqs are supported).  The
code maintains a 48MHz clock for the USB at all times and it's possible
to change the frequency at a USB REPL and keep the REPL alive (well,
most of the time it stays, sometimes it resets the USB for some reason).
Note that USB does not work with pyb.freq of 24MHz.
2014-10-04 01:54:31 +01:00
Damien George c568a2b443 stmhal: Adjust computation of SYSCLK to retain precision. 2014-10-04 01:54:02 +01:00
Damien George 3550de4ebe stmhal: Add basic CAN bus support. 2014-10-02 17:32:02 +01:00
Damien George 5fc6aa8100 stmhal: Set is_enabled=false when creating UART object; fix doc typo. 2014-10-02 17:31:37 +01:00
Damien George 0bbe4de527 stmhal: Update help text.
Remove reference to pyb.gc; add reference to pyb.millis.

There are lots of functions not listed when you run help(), but it would
be too much to list them all, so we list only some basic, useful ones.

Addresses issue #846.
2014-10-02 14:51:17 +01:00
Dave Hylands d368611ea6 Proposed fix for USB Mass Storage. 2014-10-01 22:52:02 +01:00
Damien George de37775a26 stmhal: Enable patch_program in cc3k driver, with key. 2014-09-30 23:43:38 +01:00
Damien George e5cc4b2503 stmhal: Fix wiznet5k init of SPI bus. 2014-09-30 23:34:18 +01:00
Damien George 8762418d0c drivers, cc3000: Wrap exported functions in a macro for renaming. 2014-09-30 23:25:42 +01:00
Damien George 9d2bf9c405 drivers, wiznet5k: Wrap exported functions in a macro for renaming.
3rd party drivers should not export generic names like "close".
2014-09-30 22:51:47 +01:00
Damien George 3a1c4c5bc6 stmhal: Add network and usocket module.
As per issue #876, the network module is used to configure NICs
(hardware modules) and configure routing.  The usocket module is
supposed to implement the normal Python socket module and selects the
underlying NIC using routing logic.

Right now the routing logic is brain dead: first-initialised,
first-used.  And the routing table is just a list of registered NICs.

cc3k and wiznet5k work, but not at the same time due to C name clashes
(to be fixed).

Note that the usocket module has alias socket, so that one can import
socket and it works as normal.  But you can also override socket with
your own module, using usocket at the backend.
2014-09-30 22:36:47 +01:00
Damien George bfa7b480a7 stmhal: For spi_init, add argument to select if NSS pin is enabled.
Most of the time you don't use the NSS pin of the SPI bus, and so it
shouldn't be enabled by default (this gave some bugs in the past).
2014-09-30 22:36:47 +01:00
Damien George 8b03d944e2 py: Remove IOError since it's deprecated; use OSError instead.
In CPython IOError (and EnvironmentError) is deprecated and aliased to
OSError.  All modules that used to raise IOError now raise OSError (or a
derived exception).

In Micro Python we never used IOError (except 1 place, incorrectly) and
so don't need to keep it.

See http://legacy.python.org/dev/peps/pep-3151/ for background.
2014-09-30 13:59:30 +00:00
Damien George 41249e17c3 stmhal, fatfs: Use stdlib for string fns; make all private fns static.
We save some code bytes by using builtin string functions.
2014-09-29 15:26:46 +01:00
Damien George 3a2795e200 stmhal: Add label to internal flash drive on creation. 2014-09-29 15:26:11 +01:00
Damien George f042d7a4d7 stmhal: Fix edge case for timer PWM of 100%.
Also improve precision of calculating PWM percent in integer mode.
Also update teensy with edge case fix.
2014-09-29 14:15:01 +01:00
Damien George 853708738e Merge pull request #881 from dhylands/elapsed
Added pyb.elapsed_millis and pyb.elapsed_micros
2014-09-29 12:42:31 +01:00
Damien George bf683e6b32 Merge pull request #877 from dhylands/timer-overflow
Fix timer overflow code.
2014-09-29 12:18:48 +01:00
Dave Hylands a21f56b2d5 Added pyb.elapsed_millis and pyb.elapsed_micros
tested using:
stmhal: https://github.com/dhylands/upy-examples/blob/master/elapsed.py
teensy: https://github.com/dhylands/upy-examples/blob/master/teensy/elapsed.py
2014-09-28 11:24:44 -07:00
Dave Hylands 39296b40d4 Fix timer overflow code.
Teensy doesn't need to worry about overflows since all of
its timers are only 16-bit.

For PWM, the pulse width needs to be able to vary from 0..period+1
(pulse-width == period+1 corresponds to 100% PWM)

I couldn't test the 0xffffffff cases since we can't currently get a
period that big in python. With a prescaler of 0, that corresponds
to a freq of 0.039 (i.e. cycle every 25.56 seconds), and we can't
set that using freq or period.

I also tested both stmhal and teensy with floats disabled, which
required a few other code changes to compile.
2014-09-27 19:40:37 -07:00
Damien George f90b59e610 stmhal, modcc3k: Add ioctl to cc3k sockets so select works. 2014-09-26 13:52:41 +00:00
Damien George b766e79510 stmhal: Initial implementation of cc3k module and driver.
Pulled in and modified work done by mux/iabdalkader on cc3k driver, from
iabdalkader-cc3k-update branch.  That branch was terribly messy and had
too many conflicts to merge neatly.
2014-09-26 00:57:26 +01:00
Damien George f996d8854f drivers, cc3k: Move cc3000 driver from stmhal to drivers directory. 2014-09-26 00:56:45 +01:00
Damien George ac04a8a56a stmhal: Enable 8-byte stack alignment for IRQ handlers. 2014-09-25 15:47:53 +01:00
Damien George e8ea0724da stmhal, timer: Factor code to compute PWM percent; improve 32bit case.
Also do the same for teensy timer code.
2014-09-25 15:44:10 +01:00
Damien George 3fafe730d3 Merge pull request #868 from dhylands/fix-teensy-float
Add pulse_width_percent to teensy.
2014-09-25 14:51:44 +01:00
Dave Hylands 53d5fa641f Add pulse_width_percent to teensy.
Fix stmhal and teensy print routines to report actual prescaler an period.
Fix teensy build to use soft-float
Add USE_ARDUINO_TOOLCHAIN option to teensy build
2014-09-23 23:19:36 -07:00
Damien George 52b5d76a6b py: Free non-interned strings in the parser when not needed.
mp_parse_node_free now frees the memory associated with non-interned
strings.  And the parser calls mp_parse_node_free when discarding a
non-used node (such as a doc string).

Also, the compiler now frees the parse tree explicitly just before it
exits (as opposed to relying on the caller to do this).

Addresses issue #708 as best we can.
2014-09-23 15:31:56 +00:00
Damien George eaaebf3291 stmhal: Initialise stack pointer correctly.
Stack is full descending and must be 8-byte aligned.  It must start off
pointing to just above the last byte of RAM.

Previously, stack started pointed to last byte of RAM (eg 0x2001ffff)
and so was not 8-byte aligned.  This caused a bug in combination with
alloca.

This patch also updates some debug printing code.

Addresses issue #872 (among many other undiscovered issues).
2014-09-23 10:59:05 +01:00
Damien George 0e58c5810d stmhal: Add pulse_width_ratio to timer channel object.
This allows to set the pulse width (for PWM mode) as a ratio relative to
the period of the timer.  Eg, 0.5 is a 50% duty cycle.  You can set the
ratio in the channel init, or using channel.pulse_width_ratio; the
latter can also read the pulse width as a ratio.
2014-09-21 22:54:02 +01:00
Dave Hylands becbc87fd7 Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
Damien George 2842945e76 stmhal: Fix bugs in documentation so it compiles. 2014-09-17 23:27:42 +00:00
Damien George 612045f53f py: Add native json printing using existing print framework.
Also add start of ujson module with dumps implemented.  Enabled in unix
and stmhal ports.  Test passes on both.
2014-09-17 22:56:34 +01:00
Damien George 1d7fb82f0a stmhal: Change 64-bit arithmetic to 32-bit for SD card block addressing.
By measuring SD card addresses in blocks and not bytes, one can get away
with using 32-bit numbers.

This patch also uses proper atomic lock/unlock around SD card
read/write, adds SD.info() function, and gives error code for failed
read/writes.
2014-09-15 23:49:57 +01:00
Felix Domke 6ff42c54bb stmhal/sdcard.c: add pyb.SD.write 2014-09-15 22:34:16 +01:00
Felix Domke 09de030651 stmhal/hal/src/stm32f4xx_hal_sd.c: fix SDHC card capacity 2014-09-15 22:34:07 +01:00
Damien George b92cbe6129 py: Move definition of mp_sys_exit to core.
sys.exit always raises SystemExit so doesn't need a special
implementation for each port.  If C exit() is really needed, use the
standard os._exit function.

Also initialise mp_sys_path and mp_sys_argv in teensy port.
2014-09-15 15:53:09 +01:00
Damien George 8594ce2280 py: Implement divmod, % and proper // for floating point.
Tested and working on unix and pyboard.
2014-09-13 18:43:09 +01:00
Damien George 32781cce6d stmhal: Slightly improved memcpy; memset uses word store when aligned. 2014-09-13 00:12:41 +01:00
Damien George 5792500ccc Merge branch 'memcpy' of github.com:iabdalkader/micropython into iabdalkader-memcpy 2014-09-12 23:23:49 +01:00
Damien George 89ab3be0b1 Merge branch 'master' of github.com:micropython/micropython 2014-09-11 22:28:58 +01:00
Damien George 20beff9ae3 py and libm: Add asinf,acosf; print higher precision for float.
Also use less stack space when printing single precision float.

Addition of asinf and acosf addresses issue #851.
2014-09-11 22:24:45 +01:00
iabdalkader d60580eb5e Optimize memcpy more 2014-09-11 19:01:48 +02:00
Hirotaka Kawata 2b4af54992 Add LIS3DSH accelometer support to staccel.py 2014-09-11 16:40:53 +09:00
iabdalkader 81b2ddf5d1 Memcpy: copy words 2014-09-11 07:49:21 +02:00
Damien George 5c00757a5c stmhal: uart ioctl uses EINVAL, and checks TXE bit for write-ability. 2014-09-07 20:57:18 +01:00
Damien George 013d53c0b4 Remove skeletal modselect from extmod and just put it in stmhal. 2014-09-07 20:42:01 +01:00
Damien George e2a618615d stmhal: Fix modselect so non-hashable objects can be polled. 2014-09-07 20:41:09 +01:00
Damien George a2f55fe12b stmhal: Add polling ability to UART object. 2014-09-07 20:40:32 +01:00
Damien George 6c9c7bc75a stmhal: Implement generic select.select and select.poll. 2014-09-07 20:40:32 +01:00
Damien George bad2df3e95 stmhal, modwiznet5k: Add very minimal documentation. 2014-09-01 22:58:22 +01:00
Damien George bcf041f1a3 stmhal: Add wiznet5k module, to control WIZnet ethernet adaptor.
Allows to create socket objects that support TCP and UDP in server and
client mode.  Interface is very close to standard Python socket class,
except bind and accept do not work the same (due to hardware not
supporting them in the usual way).

Not compiled by default.  To compile this module, use:
make MICROPY_PY_WIZNET5K=1
2014-09-01 22:52:38 +01:00
Damien George ecc88e949c Change some parts of the core API to use mp_uint_t instead of uint/int.
Addressing issue #50, still some way to go yet.
2014-08-30 00:35:11 +01:00
Damien George 8707ea3421 lib: Add lib and libm, moving current files from stmhal.
Top-level lib directory is for standard C libraries that we want to
provide our own versions of (for efficiency and stand-alone reasons).
It currently has libm in it for math functions.

Also add atanf and atan2f, which addresses issue #837.
2014-08-29 22:42:26 +01:00
Damien George f05b87bd63 Merge pull request #824 from dhylands/sdcard-power
Fix sdcard_power_on to not do anything if the card is already powered on...
2014-08-26 22:58:54 +01:00
Damien George 3b72da674e stmhal, STM32F4DISC: Small changes to ST accel driver. 2014-08-26 22:41:27 +01:00
Damien George e00fb08f99 stmhal, staccel.py: Style cleanup. 2014-08-26 17:30:48 +01:00
David Siorpaes f4ce26de5c Added LIS302DL ID check 2014-08-26 18:23:00 +02:00
Damien George 3bb7efc943 stmhal: Hookup USB_VCP.any().
Thanks to Dave Hylands for this patch.
2014-08-26 14:18:22 +01:00
Damien George cd021bfe56 stmhal: Fix build issues with (old) CC3000 driver.
Addresses issue #825.
2014-08-26 14:13:53 +01:00
Dave Hylands 994bb4a839 Fix sdcard_power_on to not do anything if the card is already powered on. 2014-08-25 10:16:52 -07:00
Damien George 34e43c7ee9 stmhal: Improve efficiency of SysTick IRQ and HAL_Delay.
SysTick IRQ now increases millisecond counter directly (ie without
calling HAL_IncTick).  Provide our own version of HAL_Delay that does a
wfi while waiting.  This more than halves power consumption when running
a loop containing a pyb.delay call.  It used to be like this, but new
version of HAL library regressed this feature.
2014-08-25 18:12:44 +01:00
Damien George 29c92a407c stmhal: Use MP_OBJ_NEW_SMALL_INT directly in pyb.micros/millis.
Also some whitespace cleanup.
2014-08-25 17:38:55 +01:00
Dave Hylands 2bf044442e Add support for pyb.micros() by using the systick timer.
I also removed trailing spaces from modpyb.c which affected a couple
of lines technically not part of this patch.

Tested using: https://github.com/dhylands/upy-examples/blob/master/micros_test.py

which eventually fails due to wraparound issues (I could fix the test to compensate
but didn't bother)
2014-08-25 17:38:55 +01:00
Damien George e5cbb70328 stmhal: Make enable_irq and disable_irq inline functions.
These functions are generally 1 machine instruction, and are used in
critical code, so makes sense to have them inline.

Also leave these functions uninverted (ie 0 means enable, 1 means
disable) and provide macro constants if you really need to distinguish
the states.  This makes for smaller code as well (combined with
inlining).

Applied to teensy port as well.
2014-08-25 13:24:33 +01:00
Dave Hylands 9480138f0c Add save/restore_irq
Factored irq functions into a separate file.
2014-08-25 12:22:11 +01:00
Damien George 2c4e67e32d stmhal, pin: Update documentation. 2014-08-24 18:30:22 +01:00
Dave Hylands 3d945559d4 Added python script to map AF to a pin name
Added some functions to Pin class to query mode, pull, and af
2014-08-24 18:21:08 +01:00
Damien George 8ba832456e stmhal, modtime: Small changes, reduced code size by around 80 bytes.
Also added test for modtime.
2014-08-24 17:40:24 +01:00
Dave Hylands 6678595e7e Add time.mktime and enhance time.localtime (for stmhal)
Now you can use time.localtime on the timestamps presented by os.stat
2014-08-24 17:00:03 +01:00
Damien George 3c658a4e75 py: Fix bug where GC collected native/viper/asm function data.
Because (for Thumb) a function pointer has the LSB set, pointers to
dynamic functions in RAM (eg native, viper or asm functions) were not
being traced by the GC.  This patch is a comprehensive fix for this.

Addresses issue #820.
2014-08-24 16:28:17 +01:00
Dave Hylands 3688414d9d Put some code into the first 16K of flash
This basically shrinks the remaining size of flash in the portion
that goes after the internal flash drive.
2014-08-16 08:00:12 -07:00
Damien George b63be37be1 stmhal: In safe mode, still mount SD card and present as MSD over USB.
It's still "safe" because no scripts are run.  Remove the SD card if you
want to access the internal flash filesystem.  Addresses issue #616.

Also: remove obsolete pyb.source_dir setting, and reset pyb.main and
pyb.usb_mode settings on soft-reset.
2014-08-16 14:23:22 +01:00
Damien George b0accc8571 stmhal: Fix printing of pin name in error message. 2014-08-16 13:56:19 +01:00
Damien George 244476e3e6 stmhal: For non-debug compile, enable CC/LD opt to remove dead code.
Saves over 35k ROM due to elimination of unused HAL functions.  All
tests pass.

Addresses issue #702.
2014-08-16 13:37:05 +01:00
Damien George bf133f7737 stmhal: Resolve question in comment about timer clock. 2014-08-14 00:30:14 +01:00
Damien George 1ddd844815 extmod: Finish rename of zlib to zlibd; enable zlibd on stmhal. 2014-08-12 23:23:53 +01:00
Damien George 105e32f1a5 stmhal: Enable moductypes by default.
Also fixes compiler error in moductypes when compiled without debugging.

Addresses issue #778.
2014-08-12 20:02:26 +01:00
Damien George 101d87da6a stmhal: Working STM32F4DISC accelerometer, via Python script.
Thanks to David Siorpaes.
2014-08-10 22:26:20 +01:00
Damien George 30dd23aa7f doc: Document gc, sys, math, cmath. 2014-08-10 17:50:28 +01:00
Damien George 0c64c634ca stmhal: Add sys.platform string to PYBv1.0 (it's "pyboard"). 2014-08-10 17:49:52 +01:00
Damien George 2605df3346 stmhal, pin: Save 140 bytes ROM by simplifying pin_print function. 2014-08-09 09:19:37 +01:00
Damien George 04019e365f stmhal, pin: Simplify default value for alternate function init. 2014-08-09 08:51:12 +01:00
Damien George ea439e59d9 stmhal: Start of documentation for modos and modtime. 2014-08-08 23:30:01 +01:00
Damien George 284efa89ae stmhal/teensy: Use _ instead of - in source file names.
Trying to move towards consistency, let's use _ exclusively in names of
source files (eg .c, .h, .csv).
2014-08-08 22:34:06 +01:00
Damien George 4b67463be1 stmhal: Fix documentation; remove ability to specify af by str. 2014-08-08 22:26:53 +01:00
Damien George 5b7c0c437b stmhal: Comment out unused functions. 2014-08-08 22:25:46 +01:00
Dave Hylands 6f418fc1b0 Add support for selecting pin alternate functions from python.
Converts generted pins to use qstrs instead of string pointers.

This patch also adds the following functions:
pyb.Pin.names()
pyb.Pin.af_list()
pyb.Pin.gpio()

dir(pyb.Pin.board) and dir(pyb.Pin.cpu) also produce useful results.

pyb.Pin now takes kw args.

pyb.Pin.__str__ now prints more useful information about the pin
configuration.

I found the following functions in my boot.py to be useful:
```python
def pins():
    for pin_name in dir(pyb.Pin.board):
        pin = pyb.Pin(pin_name)
        print('{:10s} {:s}'.format(pin_name, str(pin)))

def af():
    for pin_name in dir(pyb.Pin.board):
        pin = pyb.Pin(pin_name)
        print('{:10s} {:s}'.format(pin_name, str(pin.af_list())))
```
2014-08-07 23:15:41 -07:00
Damien George 3ef911345c stmhal: Update STM32Cube F4 HAL driver to V1.3.0.
This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June
2014.  Files were copied verbatim from the ST package.  Only change was
to suppress compiler warning of unused variables in 4 places.

A lot of the changes from ST are cosmetic: comments and white space.
Some small code changes here and there, and addition of F411 header.

Main code change is how SysTick interrupt is set: it now has a
configuration variable to set the priority, so we no longer need to work
around this (originall in system_stm32f4xx.c).
2014-08-06 22:33:31 +01:00
Damien George 8a11d693cf stmhal: Ability to stat /flash and /sd.
Addresses issue #780.
2014-08-06 19:02:34 +01:00
Damien George 2fe2a05f9f stmhal: Put #if guards around all GPIOx_CLK_ENABLE's.
Specifically, teensy port does not have these macros defined.
2014-08-06 16:40:20 +01:00
Damien George 95ea4f0c95 stmhal: Enable relevant GPIO clock when Pin obj is init'd. 2014-08-06 16:04:57 +01:00
Damien George 7cc20e7e99 stmhal: Wrap DAC module and os.urandom in relevant #if's. 2014-08-05 23:35:21 +01:00
Damien George 56da07dcfa stmhal, math: Define _M_LN2 if not already defined.
Addresses issue #790.
2014-08-05 14:13:05 +00:00
Damien George ccacdf44b6 stmhal: Clean up reset/soft-reset code; fix bug init'ing VCP exc.
Make a clearer distinction between init functions that must be done
before any scripts can run (xxx_init0) and those that can be safely
deferred (xxx_init).

Fix bug initialising USB VCP exception.  Addresses issue #788.

Re-order some init function to improve reliability of
reset/soft-reset.
2014-08-04 11:09:51 +01:00
Damien George 8dbbbbc793 Put call to qstr_init and mp_init_emergency_exc_buf in mp_init.
qstr_init is always called exactly before mp_init, so makes sense to
just have mp_init call it.  Similarly with
mp_init_emergency_exception_buf.  Doing this makes the ports simpler and
less error prone (ie they can no longer forget to call these).
2014-08-04 10:05:16 +01:00
Damien George 8362bffb2e stmhal: Document behaviour of usb_vcp_recv_byte. 2014-08-03 17:30:26 +01:00
Damien George 2e41646eb7 stmhal: Add more documentation for USB_VCP. 2014-08-02 14:43:20 +01:00
Damien George 87bbb388db stmhal: Add documentation for LCD; update docs for USB_VCP. 2014-08-02 14:35:38 +01:00
Damien George 71bed1a9a7 stmhal: Add preliminary driver for ST32F4DISC accelerometer.
Written in Python, not currently working.  See issue #725.
2014-08-02 12:51:18 +01:00
Dave Hylands f8f963a14a Fix modos.c to compile for the STM32F4Discovery board (which doesn't have an sdcard) 2014-08-01 08:10:41 -07:00
Damien George 65dd7bc13d stmhal: Change 0:/ and 1:/ to /flash and /sd; add CWD support.
Some important changes to the way the file system is structured on the
pyboard:

1. 0: and 1: drive names are now replaced with POSIX inspired
directories, namely /flash and /sd.

2. Filesystem now supports the notion of a current working directory.
Supports the standard Python way of manipulating it: os.chdir and
os.getcwd.

3. On boot up, current directory is /flash if no SD inserted, else /sd
if SD inserted.  Then runs boot.py and main.py from the current dir.
This is the same as the old behaviour, but is much more consistent and
flexible (eg you can os.chdir in boot.py to change where main.py is run
from).

4. sys.path (for import) is now set to '' (current dir), plus /flash
and /flash/lib, and then /sd and /sd/lib if SD inserted.  This, along
with CWD, means that import now works properly.  You can import a file
from the current directory.

5. os.listdir is fixed to return just the basename, not the full path.

See issue #537 for background and discussion.
2014-07-31 23:44:04 +01:00
Damien George bb4c6f35c6 py: Make MP_OBJ_NEW_SMALL_INT cast arg to mp_int_t itself.
Addresses issue #724.
2014-07-31 10:49:14 +01:00
Damien George fa1ecda3fd stmhal, accel: Increase start-up times to 30ms; add extra 30ms delay.
For accel to start-up reliably, need to wait 30ms between on/off, and
30ms for it to enter active mode.  With this fix the accel can be read
immediately after initialising it.

Addresses issue #763.
2014-07-31 10:39:52 +01:00
Damien George 3c4db9f91c stmhal: Add USB_VCP class/object, for direct USB VCP control.
Before, pyb.stdin/pyb.stdout allowed some kind of access to the USB VCP
device, but it was basic access.

This patch adds a proper USB_VCP class and object with much more control
over the USB VCP device.  Create an object with pyb.USB_VCP(), then use
this object as if it were a UART object.  It has send, recv, read,
write, and other methods.  send and recv allow a timeout to be specified.

Addresses issue 774.
2014-07-31 10:30:42 +01:00
Damien George 94fbe9711a py: Change lexer stream API to return bytes not chars.
Lexer is now 8-bit clean inside strings.
2014-07-30 11:46:05 +01:00
Damien George 07133415d2 Merge pull request #738 from dhylands/except-args
Add support for storing args during an exception raised by an irq.
2014-07-29 23:15:35 +01:00