3187e4c7e7
stm32/mphalport: Update HAL version to 1.11.0 to match stm32lib.
...
Signed-off-by: Damien George <damien@micropython.org>
2023-03-21 14:02:49 +11:00
427d72667f
stm32: Add support for STM32L1 MCUs.
...
This change adds STM32L1 support to the STM32 port.
2022-09-25 23:56:41 +10:00
54eaa8c8a6
stm32/mphalport: Add mp_hal_get_spi_obj() helper function.
...
The function spi_from_mp_obj() is kept since it is used by the cc3k driver.
2022-08-23 14:59:48 +10:00
c3305c49e4
stm32: Add definitions required for lwIP version of Wiznet NIC.
2022-08-23 14:58:13 +10:00
010012c7c3
stm32: Add support for G0 MCUs.
...
This commit adds support for the STM32G0 series of MCUs.
Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
88ac5a3116
stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
...
Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
5900257dd6
extmod/uplatform: Use generic custom platform string.
...
Don't force the 'HAL' string to be part of the platform string because
it doesn't have a sensible meaning for all possible platforms, and
swap it with the PLATFORM_ARCH string so the strings which most platforms
have come first.
2021-11-18 10:46:14 +11:00
782d5b2e53
stm32: Enable platform module.
...
The HAL version is based on the stm32lib version.
2021-09-19 23:35:44 +10:00
afd47d58ac
stm32/flash: Make flash C-API reusable, and funcs return an error code.
...
This commit makes the low-level flash C functions usable by code other than
flashbdev.c (eg by mboot). Changes in this commit are:
- flash_erase() and flash_write() now return an errno error code, a
negative value on error.
- flash_erase() now automatically locks the flash, as well as unlocking it.
- flash_write() now automatically unlocks the flash, as well as locking it.
- flashbdev.c is modified for the above changes.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
69661f3343
all: Reformat C and Python source code with tools/codeformat.py.
...
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
4ab4bf3ec6
ports: Modify mp_hal_pin_write macro so it can be used as a function.
...
Even though it doesn't return anything it could still be used like a
function. Addresses issue #5501 .
2020-01-14 23:48:42 +11:00
b1e04848ef
stm32/mphalport: Put PYBD specific MAC code in board specific file.
2019-08-28 12:37:13 +10:00
73e8b7e0e4
stm32: Update components to work with new H7xx HAL.
2019-07-03 23:40:49 +10:00
370a8116c4
stm32/mphalport: Add support for having MAC in OTP region.
2019-06-03 16:47:35 +10:00
cc63e19332
stm32/mphalport: Add mp_hal_get_mac() helper function.
2019-02-26 23:32:07 +11:00
8ed4a28dae
stm32/sdram: Increase GPIO speed for SDRAM interface to "very high".
...
Currently all usages of mp_hal_pin_config_alt_static() set the pin speed to
"high" (50Mhz). The SDRAM interface typically runs much faster than this
so should be set to the maximum pin speed.
This commit adds mp_hal_pin_config_alt_static_speed() which allows setting
the pin speed along with the other alternate function details.
2019-02-20 16:54:32 +11:00
070937fe93
stm32: Add support for Cortex-M0 CPUs.
2018-05-28 21:46:20 +10:00
3022947343
stm32/mphalport: Support ADC mode on a pin for L4 MCUs.
2018-05-02 12:17:45 +10:00
a28bd4ac94
stm32/mphalport: Add mp_hal_pin_config_speed() to select GPIO speed.
...
It should be used after mp_hal_pin_config() or mp_hal_pin_config_alt().
2018-05-01 17:31:23 +10:00
bc3a5f1917
stm32/mphalport: Use MCU regs to detect if cycle counter is started.
...
Instead of using a dedicated variable in RAM it's simpler to use the
relevant bits in the DWT register.
2018-03-29 16:23:52 +11:00
3f86fbcb07
stm32/mphalport: Use GPIO BSRRL/BSRRH registers for H7 MCUs.
2018-03-09 15:10:10 +11:00
989fc16162
stm32: Move MCU-specific cfg from mphalport.h to mpconfigboard_common.h.
...
It's cleaner to have all the MCU-specific configuration in one location,
not least to help with adding support for a new MCU series.
2018-02-23 16:54:07 +11:00
e8a8fa77ca
stm32: Improve support for STM32F722, F723, F732, F733 MCUs.
2018-02-01 13:11:32 +11:00
4a93801c12
all: Update Makefiles and others to build with new ports/ dir layout.
...
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
01dd7804b8
ports: Make new ports/ sub-directory and move all ports there.
...
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00
Damien George
yn386
robert-hh
Asensio Lorenzo Sempere
stijn
iabdalkader
Damien George
Memiks
Andrew Leech