32eae53fbc
stm32/boards: Enable support for bluetooth on WB55 boards.
2019-11-01 14:58:24 +11:00
6a64b280d0
stm32: Add support for RF coprocessor on WB55 MCUs.
...
This requires a BLE wireless stack firmware to be already programmed in the
secure flash area of the device.
2019-11-01 14:52:17 +11:00
8ba963cfa3
tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
...
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest. This means that all file operations within a
manifest are relative to that manifest's location.
As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR). And rename $(MPY) to $(MPY_DIR) to be
consistent.
Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
925f244ab3
stm32/boards: Add NADHAT_PYB405 board.
2019-10-18 11:41:22 +11:00
287800d6e1
stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
...
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
06ae818f93
stm32/boards: Add new board ADAFRUIT_F405_EXPRESS.
2019-10-11 11:50:36 +11:00
4a6974bea5
stm32/boards/PYBD_SF2: Put nimble library in external QSPI XIP flash.
...
The BLE stack is not performance critical, so put it in external
memory-mapped flash to save internal flash for other things (like frozen
bytecode).
2019-10-05 23:51:33 +10:00
26e90a0514
stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
...
The previous commit changed the default configuration on L4 MCUs to use
LSI, so configure these boards to use LSE again.
2019-10-04 16:10:13 +10:00
fafa9d35dd
stm32/boards/PYBD: Enable BLE for Pyboard D.
2019-10-01 09:51:02 +10:00
eb12fa3862
stm32/powerctrlboot: Add support for HSI at 8MHz on F0 MCUs.
...
For use with F0 MCUs that don't have HSI48. Select the clock source
explicitly in mpconfigboard.h.
On the NUCLEO_F091RC board use HSE bypass when HSE is chosen because the
NUCLEO clock source is STLINK not a crystal.
2019-09-26 17:34:04 +10:00
4f78ba3cf4
stm32/boards/NUCLEO_H743ZI: Enable FDCAN on this board.
2019-09-23 17:00:54 +10:00
cfec054073
stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl.
2019-09-11 11:20:58 +10:00
c8c37ca407
stm32/boards/STM32F769DISC: Fix number of SDRAM row bits.
...
According to the schematic, the SDRAM part on this board is a
MT48LC4M32B2B5-6A, with "Row addressing 4K A[11:0]" (per datasheet). This
commit updates mpconfigboard.h from 13 to 12 to match.
2019-09-10 23:13:52 +10:00
f9d142523c
stm32/boards/MIKROE_CLICKER2_STM32: Add MikroElektronika Clicker2 board.
...
- STM32F407VGT6 (1MB of Flash, 192+4 Kbytes of SRAM)
- 5V (via USB) or Li-Polymer Battery (3.7V) power input
- 2 x LEDs
- 2 x user switches
- 2 x mikroBUS sockets
- 2 x 1x26 mikromedia-compatible headers (52 pins)
https://www.mikroe.com/clicker-2-stm32f4
2019-09-10 13:57:01 +10:00
2b07f56c2b
stm32/boards/NUCLEO_L073RZ: Fix typo in MCU name.
2019-09-10 11:53:00 +10:00
bd2e46e0a5
stm32/boards/stm32wb55_af.csv: Fix ADC pin-channel function mapping.
2019-09-06 17:56:34 +10:00
5789558d60
stm32/boards/PYBD_SF2: Exclude certain things when building mboot.
2019-08-28 12:37:13 +10:00
b1e04848ef
stm32/mphalport: Put PYBD specific MAC code in board specific file.
2019-08-28 12:37:13 +10:00
8485b72d0d
stm32/boards/NUCLEO_L432KC: Add config for USB VCP support.
2019-08-15 12:46:34 +10:00
ad0b7cb017
stm32/boards/xxx_WB55: Enable USB HID now that it works on WB MCUs.
2019-07-25 17:49:53 +10:00
3b258ef213
stm32/boards/NUCLEO_F722ZE: Add definition files for new board.
2019-07-25 16:31:36 +10:00
09267bb147
stm32/boards/stm32f722.ld: Provide memory regions for internal FS.
2019-07-25 16:31:36 +10:00
0c12adca46
stm32/boards/USBDONGLE_WB55: Add definition files for new board.
2019-07-17 17:00:34 +10:00
d2a8fb747f
stm32/boards/NUCLEO_WB55: Add definition files for new board.
2019-07-17 17:00:34 +10:00
9849567a06
stm32/boards: Add MCU support files for STM32WB55.
2019-07-17 16:50:42 +10:00
02b2ad4fbd
stm32/boards/STM32F769DISC: Fix length of FLASH_APP section.
...
Fixes issue #4924 .
2019-07-17 16:19:50 +10:00
baea43bba7
stm32/boards/B_L072Z_LRWAN1: Enable USB VCP support.
2019-07-16 14:50:44 +10:00
a17b901a9e
stm32/boards/B_L072Z_LRWAN1: Add definition files for new board.
2019-07-09 12:54:09 +10:00
d43dd886a5
stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally.
...
The Makefile now defines this variable to the correct value (but it can
still be overridden by a board if necessary).
2019-07-09 11:32:12 +10:00
c24d81119c
stm32/boards/NUCLEO_L452RE: Add definition files for new board.
2019-07-08 16:50:45 +10:00
64181b5f76
stm32: Add support for STM32L452 MCUs.
2019-07-08 16:50:19 +10:00
eea61a09c4
stm32/boards/NUCLEO_F446RE: Enable DAC.
2019-07-08 16:08:40 +10:00
7c2e83324b
stm32/boards/NUCLEO_L073RZ: Add definition files for new board.
2019-07-05 17:28:54 +10:00
9c096c190c
stm32/boards: Add MCU support files for STM32L072.
2019-07-05 17:26:03 +10:00
c1a8c7fc09
stm32/boards/PYBD_SFx: Automatically turn on EN_3V3 when powering SD/MMC
2019-07-04 11:11:11 +10:00
1cd2bc066d
stm32/boards/PYBD_SFx: Configure EN_3V3 pin as output on boot.
...
But leave it turned off, the application must turn it on if/when needed.
2019-07-04 11:03:10 +10:00
7cf8285ac8
stm32/boards: Remove startup_stm32*.s files now they are in stm32lib.
2019-07-03 23:44:17 +10:00
73e8b7e0e4
stm32: Update components to work with new H7xx HAL.
2019-07-03 23:40:49 +10:00
3581deec81
stm32/boards/PYBD_SF2: Put mbedtls library code in external QSPI flash.
...
mbedtls is large and self contained so is a good candidate to be in
external XIP flash, to keep enough spare ROM in internal flash.
2019-07-03 16:50:02 +10:00
d821a27b58
stm32/boards/PYBD_SFx: Put SPI flash to sleep during sleep modes.
2019-07-03 01:27:33 +10:00
3786592097
stm32/boards: Optimise flash and RAM allocation for L4 boards.
...
Optimisations are:
- Remove FLASH_ISR section since devices with a small flash sector erase
size don't need special FLASH_ISR handling. This reduces flash image by
approx 1.5k.
- Make SRAM2 contiguous with SRAM1 where possible.
- Simplify configuration of 2k RAM buffer used for flash filesystem.
RAM changes with this commit:
- L432: stack 6k -> 10k, bss + heap 42k -> 52k
- L476: stack 16k -> 30k, bss + heap 80k -> 96k
- L496: stack 206k -> 16k, bss + heap 112k -> 302k
2019-07-01 16:57:20 +10:00
009b1f6559
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
...
This eliminates a lot of duplicated code in these header files.
2019-06-25 14:18:24 +10:00
f96f53cd97
stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
...
These are intended to be used by all boards, to reduce the size of a
board's configuration.
2019-06-25 14:18:24 +10:00
89ebb3325b
stm32/boards/pllvalues.py: Support HSx_VALUE defined without uint32_t.
2019-06-25 14:18:24 +10:00
04c7cdb668
stm32: Enter bootloader via a system reset.
...
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code. It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).
This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process. The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
5da60ff9cb
stm32/boards: Enable ussl module via mbedtls for boards with network.
2019-06-24 17:48:28 +10:00
14cf91f704
stm32: In link script, define start of stack separately from heap end.
...
Previously the end of the heap was the start (lowest address) of the stack.
With the changes in this commit these addresses are now independent,
allowing a board to place the heap and stack in separate locations.
2019-06-14 15:29:24 +10:00
fd839221fd
stm32/boards/PYBD_SFx: Enable ussl module using mbedTLS.
2019-06-05 15:38:01 +10:00
62fe47aa3a
stm32/boards/PYBD_SFx: Enable CYW43 WLAN driver.
2019-06-03 17:14:34 +10:00
8f55c74533
stm32/boards: Add board definition files for PYBD -SF2, -SF3, -SF6.
...
These are core configurations providing PYBv1.x-level features.
2019-05-31 22:44:25 +10:00
Damien George
Jim Mussared
Frederic.Pierson
ladyada
Chris Mason
iabdalkader
cristian
Christopher Wilson
badlyby