Commit Graph

2753 Commits

Author SHA1 Message Date
Daniël van de Giessen ef16796f49 esp32/machine_pin: Fix ESP32C3 IDFv4.4.1 build.
Use new constants as seen in ESP-IDF commit b25fb1.

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2022-05-19 16:47:13 +10:00
Algy Tynan 5dac142a1a esp32/boards/LILYGO_TTGO_LORA32: Remove ID from TTGO Lora32 board json.
Generic ID creates an incorrect link on the MicroPython download page.
Remove the ID to fix the link.

Signed-off-by: Algy Tynan <algy@tynan.io>
2022-05-19 16:45:18 +10:00
Michael Himing a1abf51a9d esp32/boards/UM_FEATHERS3: Use correct sdkconfig.board. 2022-05-19 16:43:59 +10:00
Christian Zietz e92c22a839 esp8266/etshal.h: Remove unneeded function declaration. 2022-05-19 16:40:39 +10:00
Christian Zietz ea1c0557e5 esp8266/machine_wdt: Remove deinit method for watchdog.
Reasons for removal:
- It did not work properly because it stopped the hardware watchdog
  timer while keeping the software watchdog running (issue #8597).
- There isn't a deinit method for the WDT in any other port.
- "The watchdog is not intended to be stopped. That is a feature."
  (See #8600.)
2022-05-19 16:40:39 +10:00
Jim Mussared c2d889fc1e renesas-ra: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 1d33ceb0d0 cc3200: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 9e4da2320a javascript: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared ec2fe5d6ca zephyr: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 63431a5536 unix: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared d0307e79bb teensy: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared c3f7424a57 samd: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 62f00a43d5 rp2: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 60c5968f99 pic16bit: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared f67ac90fa9 nrf: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 7d79fd7e8b mimxrt: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared 4274b34d6b esp8266: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared 24127a4ac4 esp32: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared 0a92469c10 stm32: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared 4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Damien George 5b700b0af9 all: Reformat remaining C code that doesn't have a space after a comma.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 13:30:40 +10:00
Damien George b0a1b60a9b extmod: Move font_petme128_8x8.h from ports/stm32 to extmod.
And add spaces after commas so it is consistently formatted.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 13:30:40 +10:00
Damien George da31ad7aad mimxrt/mbedtls: Use core-provided tracked alloc instead of custom funcs.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 10:31:50 +10:00
Damien George 39c96b543f stm32/mbedtls: Use core-provided tracked alloc instead of custom funcs.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 10:31:50 +10:00
Damien George fca5701f74 py/malloc: Introduce m_tracked_calloc, m_tracked_free functions.
Enabled by MICROPY_TRACKED_ALLOC.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 10:31:50 +10:00
Takeo Takahashi 965747bd97 renesas-ra: Rename pyb_rtc_ to machine_rtc_.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-05-04 19:45:16 +09:00
Takeo Takahashi 5f57ec464a renesas-ra: Rename pyb_uart_ to machine_uart_.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-05-04 19:45:16 +09:00
stijn 20028c7c80 windows: Avoid busy loop when using scheduler. 2022-05-04 10:22:29 +10:00
stijn 8aa79c95bd windows: Consolidate all sleep-related functions into windows_mphal.c.
Replace the timer-based sleep with the standard win32 call since the former
has no benefits: even though it allows specifying the time in 100uSec
chunks, the actual resolution is still limited by the OS and is never
better than 1mSec.

For clarity move all of this next to the mp_hal_delay_ms definition so all
related functions are in one place.
2022-05-04 10:22:09 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Takeo Takahashi a204365df1 renesas-ra/boards: Change device name information to show properly.
* Change device name table to list style to show properly.
* Change the link of cable connection information to the latest.

Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-05-02 12:02:32 +09:00
Takeo Takahashi 0f57ccf7f2 renesas-ra: Add new port to Renesas RA.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-04-29 12:29:06 +09:00
Damien George 44186ef59b qemu-arm/mpconfigport: Define MICROPY_PY_SYS_PLATFORM.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-28 17:23:03 +10:00
Damien George 402df833fe py/modsys: Introduce sys.implementation._machine constant.
This contains a string useful for identifying the underlying machine.  This
string is kept consistent with the second part of the REPL banner via the
new config option MICROPY_BANNER_MACHINE.

This makes os.uname() more or less redundant, as all the information in
os.uname() is now available in the sys module.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-28 17:23:03 +10:00
Damien George 40047823bc py/modsys: Append MicroPython git version and build date to sys.version.
This commit adds the git hash and build date to sys.version.  This is
allowed according to CPython docs, and is what PyPy does.  The docs state:

    A string containing the version number of the Python interpreter plus
    additional information on the build number and compiler used.

Eg on CPython:

    Python 3.10.4 (main, Mar 23 2022, 23:05:40) [GCC 11.2.0] on linux
    Type "help", "copyright", "credits" or "license" for more information.
    >>> import sys
    >>> sys.version
    '3.10.4 (main, Mar 23 2022, 23:05:40) [GCC 11.2.0]'

and PyPy:

    Python 2.7.12 (5.6.0+dfsg-4, Nov 20 2016, 10:43:30)
    [PyPy 5.6.0 with GCC 6.2.0 20161109] on linux2
    Type "help", "copyright", "credits" or "license" for more information.
    >>>> import sys
    >>>> sys.version
    '2.7.12 (5.6.0+dfsg-4, Nov 20 2016, 10:43:30)\n[PyPy 5.6.0 with GCC ...

With this commit on MicroPython we now have:

    MicroPython v1.18-371-g9d08eb024 on 2022-04-28; linux [GCC 11.2.0] v...
    Use Ctrl-D to exit, Ctrl-E for paste mode
    >>> import sys
    >>> sys.version
    '3.4.0; MicroPython v1.18-371-g9d08eb024 on 2022-04-28'

Note that the start of the banner is the same as the end of sys.version.
This helps to keep code size under control because the string can be reused
by the compiler.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-28 15:23:17 +10:00
Asensio Lorenzo Sempere 9d08eb0247 stm32/boards/NUCLEO_G0B1RE: Add NUCLEO_G0B1RE board definition.
This commit adds a board definition for NUCLEO_G0B1RE. This board has the
REPL on UART2 which is connected to the on-board ST-link USB-UART.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Asensio Lorenzo Sempere 010012c7c3 stm32: Add support for G0 MCUs.
This commit adds support for the STM32G0 series of MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Asensio Lorenzo Sempere 3587d8e808 stm32/storage: Add support for internal storage on Cortex-M0 MCUs.
This implements self-triggering of the Flash NVIC interrupt on Cortex-M0
devices, which allows enabling internal storage on those MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
iabdalkader 96ad86ed2b stm32/boards/ARDUINO_PORTENTA_H7: Add support for Arduino Portenta H7. 2022-04-28 10:42:47 +10:00
iabdalkader 1f33ec140a stm32/ulpi: Include missing py/mperrno.h header. 2022-04-28 10:34:56 +10:00
iabdalkader 014912daae stm32/ulpi: Add USB3320 ULPI low-power functions.
This driver allows switching USB3320 ULPI to low-power mode.  It is ported/
adapted from ST code, stm32f7xx_lp_modes.c, which is BSD-3 licensed code.
2022-04-26 23:11:50 +10:00
iabdalkader 32914c53ef stm32/qspi: Workaround for SR set immediately after setting AR.
See issue #5441.  This issue is now reproducible on the Arduino Portenta
H747, QSPI flash PN MX25L12833F.
2022-04-26 22:33:05 +10:00
iabdalkader 5974ac256b stm32/qspi: Wait for a free FIFO location before writing to DR.
Must always check the FIFO before writing to DR.  Without this, this
function hangs on the H747.
2022-04-26 22:32:48 +10:00
iabdalkader b28839420d stm32/qspi: Support common flash sizes in MPU configuration.
Add MPU configuration for common flash sizes up to 256MiB.
2022-04-26 22:32:29 +10:00
Damien George 0e6873840b rp2/mpconfigport: Enable execfile, NotImplemented and REPL EMACS keys.
To bring this port in line with other ports that use
MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-26 22:15:07 +10:00
Damien George eb9674822b esp32/modnetwork: Fix build when MICROPY_PY_NETWORK_WLAN is disabled.
Fixes issue #8541.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-22 21:56:31 +10:00
wemos ff28d2e3b3 esp32/network_wlan: Support setting/getting txpower in WLAN.config(). 2022-04-22 21:52:28 +10:00
Damien George 5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Damien George 707aaa350a stm32/boards/LEGO_HUB_NO6: Exclude BTstack code from formatting.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 15:54:26 +10:00
iabdalkader 03c61916bc stm32/boards/ADAFRUIT_F405_EXPRESS: Use external SPI flash for storage.
Fixes issue #8553.
2022-04-20 15:37:14 +10:00
iabdalkader 71afed1a70 stm32/mphalport: Fix I/O glitches when switching GPIO mode to alt-func.
To avoid any I/O glitches in mp_hal_pin_config, make sure a valid alternate
function is set in AFR first before switching the pin mode.  When switching
from AF to INPUT or OUTPUT, the AF in AFR will remain valid up until the
pin mode is switched.
2022-04-20 15:31:14 +10:00
Chris Wilson b50fe9a6da stm32/boards/SPARKFUN_MICROMOD_STM32: Fix incorrect UART and I2C config.
Based on testing with real hardware.
2022-04-19 10:42:37 +10:00
Damien George abdc4ec08d qemu-arm/test-frzmpy: Add test for freezing constant tuples.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 23:52:14 +10:00
Damien George 24894f9065 ports: Recompile bytecode tests now that .mpy format changed.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 23:52:14 +10:00
Stephane Smith 988827b85a esp32/modesp32: Properly define RTC_VALID_EXT_PINS on S2/S3 variants.
On ESP32 S2/S3 variants, GPIO0 through GPIO21 are valid RTC pins.  This
commit defines the valid RTC_VALID_EXT_PINS for the S2/S3 variants,
otherwise, it keeps functionality the same.
2022-04-14 16:17:52 +10:00
Stephane Smith 7005354099 esp32/machine_pin: Don't expose pins 33-37 when octal SPIRAM is enabled.
For ESP32-S3 configurations, CONFIG_SPIRAM_MODE_OCT requires pins 33-37 for
PSRAM.  So exclude them from the machine_pin_type and machine_pin_irq_type
object tables.
2022-04-14 16:14:13 +10:00
Stephane Smith ae3d5289a5 esp32/boards: Compile GENERIC_SPIRAM and UM_TINYPICO with -Os.
These boards do not build with IDF v4.4 because the section .iram0.text
does not fit in region iram0_0_seg.  Enabling SPIRAM increases the code
size so use -Os instead of -O2 to build these boards.

Fixes issue #8260.
2022-04-14 16:06:41 +10:00
Damien George fe9eaf12f3 esp32: Add MICROPY_HW_ENABLE_UART_REPL and enable on generic S2/S3.
Some S2/S3 modules don't use the native USB interface but instead have an
external USB-UART.  To make the GENERIC_S3/S3 firmware work on these boards
the UART REPL is enabled in addition to the native USB CDC REPL.

Fixes issues #8418 and #8524.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 14:39:20 +10:00
Damien George be25e333df esp32/boards: Add test manifest to test freezing during build.
Includes tests for freezing @micropython.native and @micropython.viper
code.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 14:06:38 +10:00
Damien George 8045ac07f5 stm32/mpbthciport: Switch scheduling callback to use node scheduler.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 12:33:31 +10:00
Peter Hinch d242a9b7f7 rp2/machine_uart: Use read/write mutex to prevent char duplication.
Duplication of characters is caused by re-entrant calls from separate cores
of uart_fill_tx_fifo().  This patch uses a mutex to ensure that a
re-entrant execution of the function returns without affecting the UART
FIFO.

Fixes issues #8344 and #8360.
2022-04-12 11:39:00 +10:00
Dave Hylands 9d7c168bf5 stm32/boards/PYBD_SFx: Allow FROZEN_MANIFEST to be overridden.
Because mpconfigboard.mk used = rather then ?= it doesn't allow
FROZEN_MANIFEST to be overridden using a GNUmakefile or the manifest.
2022-04-11 16:19:45 +10:00
iabdalkader a82fad7d8e stm32/system_stm32: Improve H7 PLL and OSC configuration.
- Allow boards to configure CSI, HSI48 and PLL2.
- Allow peripheral clock source configuration.
- Set H7 SYSCLKSource.
2022-04-11 16:12:53 +10:00
iabdalkader 36cac5e154 stm32/system_stm32: Allow boards to configure PLL VCI, VCO and FRACN.
This removes hard-coded PLL1/3 VCI, VCO and FRACN.
2022-04-11 16:12:53 +10:00
iabdalkader a3e5a68c46 stm32/system_stm32: Set voltage scaling level 0 for H7 Rev-V devices.
This enables voltage scaling level 0 for H7 Rev-V devices, which allows the
CPU to run at the maximum supported operating frequency (480MHz).
2022-04-11 16:12:53 +10:00
iabdalkader bdbc9b395f stm32/system_stm32: Add H7 switched-mode-power-supply support.
- Add board-level configuration option to set the SMPS supply mode.
- Wait for valid voltage levels after configuring the SMPS mode.
- Wait for external supply ready flag if SMPS supplies external circuitry.
2022-04-11 16:12:53 +10:00
iabdalkader 7b3adb5ce5 stm32/Makefile: Add H747 to Makefile's MCU flags. 2022-04-11 16:12:50 +10:00
iabdalkader 2a19c3cfe1 stm32/sdram: Add function to enable SDRAM power-down mode.
Add power-down mode for maximum power saving while in standby mode, to be
used by a board if needed.  Also fix a typo in a comment.
2022-04-11 16:00:40 +10:00
Damien George cb0372b5bf stm32/mboot: Add macros for use in led_state_all().
Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:52:41 +10:00
Damien George b2deea6762 stm32/mboot: Consolidate all UI and add general state change hooks.
All user interface (LED, button) code has been moved to ui.c, and the
interface to this code with the rest of the system now goes through calls
to mboot_state_change().  This state-change function can be overridden by a
board to fully customise the user interface behaviour.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:52:41 +10:00
Damien George aab005c75b extmod/modusocket: Provide config macro for socket.listen backlog deflt.
To make it possible to change this value for any given port or board.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:28:56 +10:00
Jon Bjarni Bjarnason 919f696ad2 extmod/modusocket: Implement optional socket.listen backlog argument.
This follows the CPython change: https://bugs.python.org/issue21455

Socket listen backlog defaults to 2 if not given, based on most bare metal
targets not having many resources for a large backlog.  On UNIX it defaults
to SOMAXCONN or 128, whichever is less.
2022-04-11 15:26:47 +10:00
Damien George b59989f40e rp2/Makefile: Add mbedtls to GIT_SUBMODULES list and use it in CI func.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 13:05:25 +10:00
robert-hh ca41eda281 mimxrt/mphalport: Fix USB CDC RX handling to not block when unprocessed.
Changes in this commit:
- Fix USB CDC RX handling to not block when unprocessed.  The fix follows
  5873390226.
- Fix dupterm rx.
- Remove some obsolete lines.
2022-04-11 12:30:59 +10:00
robert-hh 752fe75910 mimxrt/machine_spi: Improve handling of busy SPI peripheral.
This commit changes the method of waiting for SPI being not busy.  Instead
of the FIFO size, the TransferBusyFlag is probed.

Also, raise an error if the transfer failed.
2022-04-11 12:27:49 +10:00
robert-hh b70b8ce3e4 mimxrt/machine_rtc: Start RTC at boot and set datetime if not set.
Changes in this commit:
- Start the RTC Timer at system boot.  Otherwise time.time() will advance
  only if an RTC() object was created.
- Set the time to a more recent date than Jan 1, 1970, if not set.  That is
  2013/10/14, 19:53:11, MicroPython's first commit.
- Compensate an underflow in in timeutils_seconds_since_2000(), called by
  time.time(), if the time is set to a pre-2000 date.
2022-04-11 12:25:23 +10:00
robert-hh e3030f7436 mimxrt/modules: Append /flash/lib to the default sys.path. 2022-04-11 12:25:15 +10:00
robert-hh 798a29f629 mimxrt/boards: Add board.json file for OLIMEX RT1010Py. 2022-04-11 12:24:43 +10:00
Damien George 66b5c4c770 stm32/machine_bitstream: Include all clobbered regs in Cortex-M0 impl.
These additional registers are used by the assembly code.

Thanks to Jim Mussared for the fix.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-07 21:17:51 +10:00
Damien George 43d50f006d stm32/mpconfigport.h: Let MICROPY_PY_IO_FILEIO take its default value.
This is enabled at MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES, which is the
default for stm32.  Not setting the value in mpconfigboard.h allows boards
to optionally configure it.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-07 13:25:48 +10:00
Martin Fischer 5873390226 rp2/mphalport: Fix USB CDC RX handling to not block when unprocessed.
Prior to this commit, the USB CDC OUT endpoint got NACK'd if a character
was received but not consumed by the application, e.g. via
sys.stdin.read().  This meant that USB CDC was blocked and no additional
characters could be sent from the host.  In particular a ctrl-C could not
interrupt the application if another character was pending.

To fix the issue, the approach in this commit uses a callback tud_cdc_rx_cb
which is called by the TinyUSB stack on reception of new CDC data.  By
consuming the data immediately, the endpoint does not stall anymore.  The
previous handler tud_cdc_rx_wanted_cb was made obsolete and removed.

In addition some cleanup was done along the way: by adding interrupt_char.c
and removing the existing code mp_hal_set_interrupt_char().  Also, there is
now only one (stdin) ringbuffer.

Fixes issue #7996.
2022-04-05 10:47:19 +10:00
iabdalkader 5682595d75 esp32: Allow overriding cmake frozen manifest from the command line.
If MICROPY_FROZEN_MANIFEST is set from the cmake command line, then it will
override the default and any manifest set by the board.
2022-04-04 23:49:10 +10:00
Damien George 86e6744ff5 rp2: Enable ucryptolib, using mbedtls for backend functions.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-04 23:15:01 +10:00
Andrew Leech 8db93dc016 stm32/Makefile: Allow overriding COPT in Makefile.
It can now be set in mpconfigboard.mk (as well as the make command line).
2022-04-04 23:12:15 +10:00
iabdalkader 5562ed3f43 stm32/pyb_can: Replace CAN.initfilterbanks with CAN.init keyword arg.
The CAN.initfilterbanks() class method is removed, and its functionality is
replaced with the "num_filter_banks" keyword argument to the CAN
constructor and CAN.init().  This configures the filter bank split.

This new approach provides more flexibility configuring the resources used
by a given CAN instance, allowing other MCUs like H7 to fit the API.  It
also brings CAN closer to how other machine peripherals are configured,
where everything is done in the constructor/init method.

This is a breaking change to the CAN API.
2022-04-02 22:42:00 +11:00
iabdalkader a79706fb39 stm32/pyb_can: Define the maximum bit timing parameters.
Define the maximum parameters for CAN/FDCAN nominal bit timing, and for
FDCAN data bit timing, for bit timing calculations.
2022-04-02 22:41:37 +11:00
iabdalkader 95104c9f6e stm32/pyb_can: Return the filter ID and type of received messages.
CAN.recv() now returns a 5-tuple, with the new element in the second
position being a boolean, True if the ID is extended.

This is a breaking change of the API for CAN.recv().
2022-04-02 22:40:09 +11:00
iabdalkader e7264e9532 stm32/pyb_can: Add support for bus with mixed Classic/FD nodes.
A CAN bus can have mixed classic/FD nodes.  Prior to this patch the CAN API
could be configured for either standard or extended ID, but not both/mixed
operation.

This patch allows extended IDs to be filtered and enabled on a per-message
basis, in send(), setfilter() and clearfilter().

This is a breaking change to the API: init() no longer accepts the extframe
keyword argument.
2022-04-02 22:37:52 +11:00
iabdalkader 3320ec44ed stm32/pyb_can: Add support for CAN FD extended frame ID. 2022-04-02 22:37:45 +11:00
iabdalkader ff287d085f stm32/pyb_can: Enable CAN FD frame support and BRS.
- Enable CAN FD frame support and BRS.
- Optimize the message RAM usage per FDCAN instance.
- Document the usage and different sections of the Message RAM.
2022-04-02 22:37:27 +11:00
Andrew Leech a41bc5a7ca stm32/modmachine: Add deepsleep support to reset_cause() for WB55. 2022-03-30 15:56:26 +11:00
Meriç SARIIŞIK 6b23f7d301 stm32/sdio: Use runtime calculation for clock divider of sdio on H7.
STM32H7 family has a different calculation compared to the current one for
the SDMMC clock divider configuration.
2022-03-30 15:40:59 +11:00
Andrew Leech 303e222f70 nrf/modules: Include uasyncio in default board manifest. 2022-03-30 15:37:49 +11:00
Andrew Leech f92da1adc4 nrf/drivers/usb: Fix MP_STREAM_POLL_RD support on USB CDC.
This gets ipoll working on USB CDC stdin.
2022-03-30 15:34:25 +11:00
Andrew Leech dc8b43adc7 nrf/drivers/usb: Fix background events/scheduling while at USB REPL. 2022-03-30 15:33:29 +11:00
MikeTeachman 1f6cb8f047 mixmrt/machine_i2s: Add I2S protocol support.
This commit adds support for machine.I2S on the mimxrt port.  The I2S API
is consistent with the existing stm32, esp32, and rp2 implementations.

I2S features:
- controller transmit and controller receive
- 16-bit and 32-bit sample sizes
- mono and stereo formats
- sampling frequencies from 8kHz to 48kHz
- 3 modes of operation:
  - blocking
  - non-blocking with callback
  - uasyncio
- configurable internal buffer
- optional MCK

Tested with the following development boards:
- MIMXRT1010_EVK, MIMXRT1015_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK
- Teensy 4.0, Teensy 4.1
- Olimex RT1010
- Seeed ARCH MIX

Tested with the following I2S hardware peripherals:
- UDA1334
- GY-SPH0645LM4H
- WM8960 codec on board the MIMXRT boards and separate breakout board
- INMP441
- PCM5102
- SGTL5000 on the Teensy audio shield

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2022-03-30 14:12:40 +11:00
Damien George 6804a8a891 stm32/machine_i2s: Fix 16-bit stereo i2s_frame_map.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-29 11:44:08 +11:00
Damien George 2a91c8a888 stm32/machine_i2s: Allow I2S.deinit to be called multiple times.
In particular, it is called by the constructor if the instance already
exists.  So if the previous instance was deinit'd then it will be deinit'd
a second time.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-29 11:44:08 +11:00
Damien George c90dfba04c stm32/machine_i2s: Set FullDuplexMode to disabled on F4.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-29 11:44:08 +11:00