30840ebc99
all: Enable extra conversion warnings where applicable.
...
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously. For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
4677315a01
travis: Finish jobs early after test failure.
...
For jobs which run tests multiple times terminate after the first run fails
otherwise the next test run overwrites the previous results, making
--print-failures useless.
2020-04-18 22:35:56 +10:00
91a6ddc78a
travis: Decrease build duration by starting OSX build early.
...
Looking at the recent build history the time it takes just to complete the
OSX build is already 12 minutes so make it start early, which brings down
the total build time from about 20 minutes to 14 minutes.
2020-04-18 22:35:44 +10:00
e880c8dfaa
travis: Split esp32 ESP-IDF v3 and v4 builds to separate jobs.
...
To make it easier to see what is happening when there is a failure. This
commit also fixes the ESP-IDF v4 build to use the correct GCC 8.2.0.
2020-04-13 16:06:58 +10:00
bd5633778f
travis: Make OSX build work again by not installing pkgconfig.
...
Recent builds are failing with the following error:
Error: pkg-config 0.29.2 is already installed
Assuming this will be the case form now on, we don't have to install
pkgconfig anymore.
2020-04-07 13:59:34 +10:00
ad2b3185da
travis: Build GENERIC_1M board as part of esp8266 job.
2020-04-04 16:37:51 +11:00
581f9135a4
tests/run-tests: Add commands to print and clean *.exp,out files.
...
This adds a couple of commands to the run-tests script to print the diffs
of failed tests and also to clean up the .exp and .out files after failed
tests. (And a spelling error is fixed while we are touching nearby code.)
Travis is also updated to use these new commands, including using it for
more builds.
2020-03-30 13:25:58 +11:00
2461349b27
travis: Build full unix coverage build on osx job.
...
This should help catch more compile errors with the clang compiler.
2020-03-30 12:05:22 +11:00
b56caaf104
travis: Build NUCLEO_L073RZ instead of B_L072Z_LRWAN1 for stm32 job.
...
The NUCLEO_L073RZ build is slightly bigger and this MCU has only 192k flash
so this helps to catch flash overflow.
2020-03-28 13:56:16 +11:00
6c77d5c7cd
travis: Use grep with --text on qemu-arm output.
...
If the .out file contains non-text characters, grep won't show the output
unless we ask nicely.
2020-03-28 13:29:54 +11:00
0608fbff29
travis: Use custom PPA to get pre-built uncrustify.
...
Use PPA so that we don't have to rebuild uncrustify from source, speeding
up the job. This also requires not running this test on arm64.
2020-03-28 11:40:47 +11:00
3667effff1
travis: Exclude some uasyncio tests on OSX.
2020-03-26 01:25:45 +11:00
98ab7643a7
travis: Print errors out for OSX job.
2020-03-26 01:21:04 +11:00
ab00f4c44e
qemu-arm: Set default board as mps2-an385 to get more flash for tests.
...
And use Ubuntu bionic for qemu-arm Travic CI job.
2020-03-26 01:21:04 +11:00
f552451cba
travis: For unix tests use Makefile target instead of explicit commands.
2020-03-11 20:20:18 +11:00
bd50651567
travis: Run multi_net tests as part of coverage job.
2020-03-10 02:22:34 +11:00
ecee6f2877
travis: Build stm32 PYBD_SF6 with BTstack as bluetooth stack.
2020-03-10 01:53:42 +11:00
f6375ac3eb
travis: Add CI job to check code formatting.
...
The CI job will fail if there is any code which does not conform to the
style encoded by tools/codeformat.py. And it will list any changes
required.
uncrustify is built from source because Ubuntu bionic has uncrustify-0.66.1
which is from 2017/11/22 and is missing many options needed here.
2020-02-28 10:34:17 +11:00
2d800c77a0
travis: Add OSX build to CI.
...
Add a standard unix port build in an OSX environment using clang. Should
help in catching build failures due to platform differences early on.
2020-02-21 14:20:52 +11:00
baf11f237b
unix/Makefile: Remove old variant targets that are no longer needed.
...
To eliminate confusion about what targets to use when building.
2020-02-16 00:15:57 +11:00
3032ae1155
esp32: Enable NimBLE support on all builds (IDF 3.3 and 4.0).
...
This commit updates the IDFv3 version to v3.3.1, and enables the
"ubluetooth" module by default on IDFv3 builds.
2020-01-15 00:24:43 +11:00
977b532c8f
unix: Rename unix binaries to micropython-variant (not _variant).
...
For consistency with mpy-cross, and other unix tools in general.
2020-01-12 10:37:40 +11:00
7319d546b7
travis: Update travis to specify which unix variant to build.
2020-01-12 10:37:33 +11:00
e83ab7374b
travis: Add stm32 build in nanbox mode.
2019-12-27 22:54:53 +11:00
11b4524b39
travis: Add new job to build and test unix coverage in 32-bit mode.
2019-12-27 12:30:51 +11:00
4da763fc49
travis: Build urandom native module in coverage job.
2019-12-13 13:33:45 +11:00
ac769672fd
travis: Add tests for building and importing dynamic native modules.
2019-12-12 20:15:28 +11:00
162016ad9c
travis: Add job to build and test unix minimal port.
...
To test that unix minimal port builds, and that test-suite can run with
minimal features enabled.
2019-10-29 22:23:00 +11:00
079cc940a6
powerpc: Add initial port to bare metal PowerPC arch.
...
Runs in microwatt (GHDL and FPGA) and qemu.
Port done initially by Michael Neuling, with help from Anton Blanchard and
Jordan Niethe.
2019-10-22 22:45:33 +11:00
f562f94e1c
travis: Use "make submodules" to init required modules for each port.
2019-10-15 17:14:41 +11:00
3117fde407
travis: Add esp8266 GENERIC_512K build to CI.
2019-10-10 16:32:25 +11:00
fa23033fc4
travis: Add BLE submodules to ESP32 IDF4 build.
2019-10-08 14:52:31 +11:00
deef6f3718
travis: Build unix nanbox with PYTHON=python2.
...
To test build support with Python 2.7.
2019-10-05 23:11:47 +10:00
d72dbb822c
stm32: Provide port-specific implementation for Nimble on STM32.
2019-10-01 09:51:02 +10:00
6647d03e42
travis: Build more stm32 boards to cover all supported MCUs.
2019-09-26 16:43:34 +10:00
b1505541da
travis: Add ESP32 build with IDF v4.
2019-09-17 12:26:35 +10:00
0b85b5b8b3
travis: Add new job to test unix port with sys.settrace enabled.
2019-08-30 16:49:13 +10:00
8f55a8fab6
travis: Build an stm32 board with threading enabled to test it with CI.
2019-07-26 12:44:47 +10:00
a67d9155e6
travis: Switch unix stackless build to use clang.
...
To test a different compiler, other than gcc.
2019-07-17 15:52:27 +10:00
14f61a224d
travis: Build stm32 mboot for PYBD_SF6 as part of CI.
2019-07-09 11:47:57 +10:00
9ca4789130
travis: Add samd port to Travis build.
2019-07-01 17:19:18 +10:00
9cebead276
travis: Enable performance benchmark tests on standard unix build.
2019-06-28 16:30:01 +10:00
e06dcad5d3
travis: Build esp32 firmware as part of Travis CI.
...
Toolchain installation and build takes about 3 minutes.
2019-06-25 14:55:10 +10:00
cc12f750b4
travis: Build esp8266 firmware as part of Travis CI.
...
Toolchain installation and build takes about 1 minute.
2019-06-25 14:55:10 +10:00
c60e0a09f0
travis: Selectively fetch git submodules only when needed.
...
This saves time when building on Travis CI: unconditionally fetching all
submodules takes about 40 seconds, but not all are needed for any given
port, so only fetch as necessary.
2019-06-25 14:55:10 +10:00
84f1067f7f
travis: Build PYBD_SF2 board as part of the stm32 job.
2019-05-31 22:47:55 +10:00
2bcb240b55
travis: Enable test for running native code via mpy.
2019-03-08 16:51:09 +11:00
775c7b86f0
travis: Update to use Ubuntu 16.04 Xenial for CI builds.
2019-02-12 13:29:22 +11:00
b7004efe36
travis: Add nrf port to Travis CI build.
2018-07-20 14:11:28 +10:00
3ffcef8bdf
travis: Use build stages and parallel jobs under Travis CI.
...
This change brings the following benefits:
- all existing tests and test behaviour is be retained
- can now use Travis parallel build mechanism
- total time for tests is about 5 mins 30 secs, down from around 10 mins
- two additional test suites are now run: standard (non coverage) unix
build and nanbox unix build
- much easier to see what is failing: if you click through to the Travis CI
details each parallel build job is displayed with pass/fail
- scales much better when adding new test targets
2018-07-19 10:04:57 +10:00
stijn
Thorsten von Eicken
Damien George
David Lechner
David Lechner
Jim Mussared
Michael Neuling
Mike Causer