d8475092d1
qemu-arm: Disable inline asm tests that use floating point.
2015-04-19 15:50:24 +01:00
39ce2db181
stmhal: Add "CDC" option to pyb.usb_mode, for CDC device only.
2015-02-13 14:02:51 +00:00
fb2006cc69
tools: Make gen-changelog.sh sort version strings correctly.
2015-02-13 13:31:02 +00:00
2f8c409a4f
qemu-arm: Disable try_finally1.py test (it fails randomly on Travis).
2015-01-25 18:48:03 +00:00
640e0b221e
py: Implement very simple frozen modules support.
...
Only modules (not packages) supported now. Source modules can be converted
to frozen module structures using tools/make-frozen.py script.
2015-01-20 11:52:12 +02:00
b58da9420c
qemu-arm: Disable basics/memoryerror.py test.
2015-01-12 16:32:14 +00:00
99dde4ed1f
qemu-arm: Enable GC and native code-gen; enable more tests.
2015-01-12 12:07:42 +00:00
85e8e2ed5b
qemu-arm: Add 'test' target to Makefile to run and verify test suite.
...
Replaces RUN_TEST=1 definition; now "make test" in qemu-arm directory
will run tests/basics/ and check that they all succeed.
This patch also enables the test on Travis CI.
2015-01-09 00:03:21 +00:00
e3fa8278b4
tools: Add script to generate a ChangeLog file.
...
We don't have an explicit ChangeLog file, but don't really need one
because we use a good version control system. This script is useful if
you need a pretty-printed ChangeLog for some reason.
2014-12-29 19:03:25 +00:00
4fd7c1a2ac
tools, pyboard.py: Write data to pyboard in chunks of 256 bytes.
...
This speeds up writes significantly.
2014-12-20 18:09:04 +00:00
17c5ce3727
tools: Make pyboard.py have infinite timeout when running script.
...
This makes pyboard.py much more useful for long running scripts. When
running a script via pyboard.py, it now waits until the script finishes,
with no timeout. CTRL-C can be used to break out of the waiting if
needed.
2014-11-30 21:30:53 +00:00
7c4445afe1
tools: Make gendoc.py able to output RST format.
2014-10-31 01:36:11 +00:00
bc1488a05f
stmhal: Improve REPL control codes; improve pyboard.py script.
...
Improvements are:
2 ctrl-C's are now needed to truly kill running script on pyboard, so
make CDC interface allow multiple ctrl-C's through at once (ie sending
b'\x03\x03' to pyboard now counts as 2 ctrl-C's).
ctrl-C in friendly-repl can now stop multi-line input.
In raw-repl mode, use ctrl-D to indicate end of running script, and also
end of any error message. Thus, output of raw-repl is always at least 2
ctrl-D's and it's much easier to parse.
pyboard.py is now a bit faster, handles exceptions from pyboard better
(prints them and exits with exit code 1), prints out the pyboard output
while the script is running (instead of waiting till the end), and
allows to follow the output of a previous script when run with no
arguments.
2014-10-26 15:39:22 +00:00
5fc42a6c97
tools, pydfu: Some fixes to support Python 3.
2014-10-22 20:27:43 +01:00
842210f53a
Add pydfu.py to the micropython tree. Use dfu_util bgy default
...
You can do:
make USE_PYDFU=1 deploy
to use pydfu.py
2014-10-22 20:18:38 +01:00
9c9db3a7a1
tools, pyboard.py: Allow exec argument to be bytes or str.
2014-10-19 14:54:52 +01:00
3b064370f8
Enable device keyword option when running pyboard.py --tests and run-tests --pyboard
2014-10-01 23:31:52 +01:00
c737086e1c
tools: Add network build to auto-build script.
2014-09-30 23:04:08 +00:00
2842945e76
stmhal: Fix bugs in documentation so it compiles.
2014-09-17 23:27:42 +00:00
f3c3010ffc
pip-micropython: Revert to using PIP_MICROPY_DEST environment var.
...
-t/--target is a pip option. Trying to use pip options for different meanings
in pip-micropython may lead to big confusion. That's why the original passed
any extra parameters using environment variables. "All options belong to pip."
2014-08-27 02:53:06 +03:00
db63660c19
Add pip-micropython to unix make install.
...
Also add -t/--target option to pip-micropython to allowing installing to
the pyboard.
Thanks to turbinenreiter/Sebastian Plamauer for the patch.
2014-08-26 16:03:57 +01:00
c4ee39dd63
tools, gendoc: Output small descr about module TOC.
2014-08-10 16:51:26 +01:00
590b2abdfc
tools, gendoc: Put module TOC/index in module/ directory.
2014-08-08 23:34:39 +01:00
ef7a066c9c
tools, gendoc: Allow constants at module level; gen module index.
...
Addresses some issues from #585 .
2014-08-08 23:29:05 +01:00
c10a4405cd
gendoc.py: Support modules w/o functions and/or classes.
...
I.e. don't assume that both are always present.
2014-06-29 15:48:30 +03:00
3793830ed9
tools: Move gendoc.py to tools, and make it a little more generic.
2014-05-10 19:12:47 +01:00
be86596bb9
tools: inline test suite generator.
2014-05-08 01:41:22 +03:00
b1442e04d1
tools: check-in errordeveloper/tinytest@eb2dbc858f
2014-05-08 01:41:21 +03:00
37936bebbf
tools: In build-stm-latest, replace git hash with git tag.
2014-05-04 00:11:09 +00:00
3244123031
tools: pyboard.py now acts as a command-line program to run scripts.
...
You can run a local script on the pyboard using:
python pyboard.py test.py
where test.py is the local script you want to run.
2014-05-03 18:14:34 +01:00
aad1204b8e
stmhal: Change names: flash to firmware, flashboard to deploy.
...
Since firmware lives in a build directory which already specifies the
board name, no real reason to also have the firmware have the board
name.
2014-05-03 17:46:45 +01:00
e88814a274
Merge pull request #543 from lurch/patch-4
...
Make pyboard.enter_raw_repl more robust
2014-05-03 13:09:16 +01:00
d9f4deef8c
Merge pull request #547 from cjbarnes18/pyboard_module_fixes
...
Fix pyboard.py tests.
2014-05-03 00:11:43 +01:00
71a1e35206
Fix pyboard.py tests.
2014-05-02 21:36:07 +01:00
ba742ed639
Add shell script to automatically build stmhal/ for all pyboards.
2014-05-02 13:49:44 +00:00
1f740bdaf4
Make pyboard.enter_raw_repl more robust
...
In case there's a program in the microcontroller's main.py running in an infinite loop
2014-05-01 20:42:23 +01:00
ca045d97b9
tools: Update pyboard.py to work with latest changes to RTC.
2014-04-21 20:18:37 +01:00
ecdf6cdc5b
tools: Fix up pybcdc.inf generation: new lines and hex digits.
...
Using Python's file open in 'r' mode opens it for text reading, which
converts all new lines to \n. Could use 'rb' binary mode, but then
don't have access to the string Template replacement functions. Thus,
force the output to have '\\r\\n' ending.
Also fix regex to match hex digits.
2014-04-16 11:45:52 +01:00
1452221aca
Auto-generate the stmhal/pybcdc_inf header file from static files
...
The USB VID&PID are automatically extracted from usbd_desc_cdc_msc.c
and inserted into pybcdc_inf.template, ensuring that the same USB
IDs get used everywhere
2014-04-16 02:41:26 +01:00
cc8c0882a0
pip-micropython: Fix inverted condition.
2014-04-15 02:32:41 +03:00
6fc40cc3da
pip-micropython: revert $HOME back to ~
2014-04-14 22:26:34 +01:00
a7239b2fc2
Merge pull request #480 from lurch/patch-2
...
Make pip-micropython more portable
2014-04-14 21:39:31 +01:00
0aac7ba344
Make pip-micropython more portable
...
Replace /tmp with a $TMPDIR variable
Replace multiple occurrences of /tmp/pip-micropy-venv with a $TMPVENV variable
Replace ~ with $HOME
2014-04-14 12:26:12 +01:00
48a9b3fd11
tools: Improve timout/reading of pyboard.py.
2014-04-14 01:47:36 +01:00
b636d024d2
Make pyboard.py have its own exception; update run-tests for pyboard.
2014-04-13 13:48:33 +01:00
06526e7ccc
pip-micropython: Apply more workarounds for setuptools, pip, etc misfeatures.
2014-04-12 23:33:14 +03:00
9f043da5c3
pip-micropython: Require command verb, but restrict to "install" only.
...
So, pip-micropython can/should be run as normal pip:
pip-micropython install micropython-unittest
2014-04-07 02:53:41 +03:00
d71fc37af7
tools: Improve reading back from pyboard.
2014-04-03 22:44:37 +01:00
0e49642965
tools: pyboard.py can now execute a file remotely!
2014-04-03 22:12:01 +01:00
802d505756
tools: Add pip-micropython to install packages in MicroPython-friendly way.
2014-04-02 12:49:07 +03:00
41ea651839
Add tools/pyboard.py, a simple module to communicate with the pyboard.
...
Using pyboard.py you can use Python running on your PC to execute
commands on the connected pyboard. See examples in that file.
2014-03-24 12:42:06 +00:00
1a1ba4d555
Change dfu.py to be Python 2/3 compatible
...
* Chane dfu.py to use Python 3 syntax to avoid dependency on Python 2.
* Update Makefile to call python instead of python2
* Fix #33
2014-01-03 08:51:02 +02:00
f0d0940638
Add tools/dfu.py, and use it in stm/Makefile.
2013-12-20 12:07:50 +00:00
Damien George
Paul Sokolovsky
Dave Hylands
blmorris
Ilya Dmitrichenko
Craig Barnes
Andrew Scheller
mux