To reduce the number of calls to mp_hal_stdout_tx_strn and improve the
overall throughput of printing data. This implementation is taken from
ports/stm32/mphalport.c.
Signed-off-by: Damien George <damien@micropython.org>
This commit makes gc_lock_depth have one counter per thread, instead of one
global counter. This makes threads properly independent with respect to
the GC, in particular threads can now independently lock the GC for
themselves without locking it for other threads. It also means a given
thread can run a hard IRQ without temporarily locking the GC for all other
threads and potentially making them have MemoryError exceptions at random
locations (this really only occurs on MCUs with multiple cores and no GIL,
eg on the rp2 port).
The commit also removes protection of the GC lock/unlock functions, which
is no longer needed when the counter is per thread (and this also fixes the
cas where a hard IRQ calling gc_lock() may stall waiting for the mutex).
It also puts the check for `gc_lock_depth > 0` outside the GC mutex in
gc_alloc, gc_realloc and gc_free, to potentially prevent a hard IRQ from
waiting on a mutex if it does attempt to allocate heap memory (and putting
the check outside the GC mutex is now safe now that there is a
gc_lock_depth per thread).
Signed-off-by: Damien George <damien@micropython.org>
From a version numbering point of view this is a downgrade (2.17.0 ->
2.16.x). However the latest commit for version 2.17.0 is from March 2019
and no further minor release happened after 2.17.0. This version is EOL.
2.16.x though is still actively maintained as a long term release, hence
security and stability fixes are still being backported, including
compatibility with upcoming compiler releases.
This was added a long time ago in 75abee206d
when USB host support was added to the stm (now stm32) port, and when this
pyexec code was actually part of the stm port. It's unlikely to work as
intended anymore. If it is needed in the future then generic hook macros
can be added in pyexec.
This library is a small and easy-to-use cryptographic library which is well
suited to embedded systems.
Signed-off-by: Damien George <damien@micropython.org>
Background: the friendly/normal REPL is intended for human use whereas the
raw REPL is for computer use/automation. Raw REPL is used for things like
pyboard.py script_to_run.py. The normal REPL has built-in flow control
because it echos back the characters. That's not so with raw REPL and flow
control is just implemented by rate limiting the amount of data that goes
in. Currently it's fixed at 256 byte chunks every 10ms. This is sometimes
too fast for slow MCUs or systems with small stdin buffers. It's also too
slow for a lot of higher-end MCUs, ie it could be a lot faster.
This commit adds a new raw REPL mode which includes flow control: the
device will echo back a character after a certain number of bytes are sent
to the host, and the host can use this to regulate the data going out to
the device. The amount of characters is controlled by the device and sent
to the host before communication starts. This flow control allows getting
the maximum speed out of a serial link, regardless of the link or the
device at the other end.
Also, this new raw REPL mode parses and compiles the incoming data as it
comes in. It does this by creating a "stdin reader" object which is then
passed to the lexer. The lexer requests bytes from this "stdin reader"
which retrieves bytes from the host, and does flow control. What this
means is that no memory is used to store the script (in the existing raw
REPL mode the device needs a big buffer to read in the script before it can
pass it on to the lexer/parser/compiler). The only memory needed on the
device is enough to parse and compile.
Finally, it would be possible to extend this new raw REPL to allow bytecode
(.mpy files) to be sent as well as text mode scripts (but that's not done
in this commit).
Some results follow. The test was to send a large 33k script that contains
mostly comments and then prints out the heap, run via pyboard.py large.py.
On PYBD-SF6, prior to this PR:
$ ./pyboard.py large.py
stack: 524 out of 23552
GC: total: 392192, used: 34464, free: 357728
No. of 1-blocks: 12, 2-blocks: 2, max blk sz: 2075, max free sz: 22345
GC memory layout; from 2001a3f0:
00000: h=hhhh=======================================hhBShShh==h=======h
00400: =====hh=B........h==h===========================================
00800: ================================================================
00c00: ================================================================
01000: ================================================================
01400: ================================================================
01800: ================================================================
01c00: ================================================================
02000: ================================================================
02400: ================================================================
02800: ================================================================
02c00: ================================================================
03000: ================================================================
03400: ================================================================
03800: ================================================================
03c00: ================================================================
04000: ================================================================
04400: ================================================================
04800: ================================================================
04c00: ================================================================
05000: ================================================================
05400: ================================================================
05800: ================================================================
05c00: ================================================================
06000: ================================================================
06400: ================================================================
06800: ================================================================
06c00: ================================================================
07000: ================================================================
07400: ================================================================
07800: ================================================================
07c00: ================================================================
08000: ================================================================
08400: ===============================================.....h==.........
(349 lines all free)
(the big blob of used memory is the large script).
Same but with this PR:
$ ./pyboard.py large.py
stack: 524 out of 23552
GC: total: 392192, used: 1296, free: 390896
No. of 1-blocks: 12, 2-blocks: 3, max blk sz: 40, max free sz: 24420
GC memory layout; from 2001a3f0:
00000: h=hhhh=======================================hhBShShh==h=======h
00400: =====hh=h=B......h==.....h==....................................
(381 lines all free)
The only thing in RAM is the compiled script (and some other unrelated
items).
Time to download before this PR: 1438ms, data rate: 230,799 bits/sec.
Time to download with this PR: 119ms, data rate: 2,788,991 bits/sec.
So it's more than 10 times faster, and uses significantly less RAM.
Results are similar on other boards. On an stm32 board that connects via
UART only at 115200 baud, the data rate goes from 80kbit/sec to
113kbit/sec, so gets close to saturating the UART link without loss of
data.
The new raw REPL mode also supports a single ctrl-C to break out of this
flow-control mode, so that a ctrl-C can always get back to a known state.
It's also backwards compatible with the original raw REPL mode, which is
still supported with the same sequence of commands. The new raw REPL
mode is activated by ctrl-E, which gives an error on devices that do not
support the new mode.
Signed-off-by: Damien George <damien@micropython.org>
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values. And
different ports may use a different Epoch.
To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").
Along with this rename, the following things have changed:
- mp_hal_time_ns() is now specified to return the number of nanoseconds
since the Epoch, rather than since 1970 (but since this is an internal
function it doesn't change anything for the user).
- littlefs timestamps on the esp8266 have been fixed (they were previously
off by 30 years in nanoseconds).
Otherwise, there is no functional change made by this commit.
Signed-off-by: Damien George <damien@micropython.org>
mp_irq_init() is useful when the IRQ object is allocated by the caller.
The mp_irq_methods_t.init method is not used anywhere so has been removed.
Signed-off-by: Damien George <damien@micropython.org>
Fixing 98e583430f, the semantics of strncpy
require that the remainder of dst be filled with null bytes.
Signed-off-by: Damien George <damien@micropython.org>
This code is imported from musl, to match existing code in libm_dbl.
The file is also added to the build in stm32/Makefile. It's not needed by
the core code but, similar to c5cc64175b,
allows round() to be used by user C modules or board extensions.
Changes in this new library version are:
- Update H7 HAL to v1.6.0.
- Update WB HAL to v1.6.0.
- Add patches to fix F4 ll_uart clock selection for UART9/UART10.
Signed-off-by: Damien George <damien@micropython.org>
The file `mbedtls_errors/mp_mbedtls_errors.c` can be used instead of
`mbedtls/library/error.c` to give shorter error strings, reducing the build
size of the error strings from about 12-16kB down to about 2-5kB.
So it can be unconditionally included in a port's build even if certain
configurations in that port do not use its features, to simplify the
Makefile.
Signed-off-by: Damien George <damien@micropython.org>
With only `sp_func_proto_paren = remove` set there are some cases where
uncrustify misses removing a space between the function name and the
opening '('. This sets all of the related options to `force` as well.
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port. This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.
Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.
The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
This change is made for two reasons:
1. A 3rd-party library (eg berkeley-db-1.xx, axtls) may use the system
provided errno for certain errors, and yet MicroPython stream objects
that it calls will be using the internal mp_stream_errno. So if the
library returns an error it is not known whether the corresponding errno
code is stored in the system errno or mp_stream_errno. Using the system
errno in all cases (eg in the mp_stream_posix_XXX wrappers) fixes this
ambiguity.
2. For systems that have threading the system-provided errno should always
be used because the errno value is thread-local.
For systems that do not have an errno, the new lib/embed/__errno.c file is
provided.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
This is an extremely minimal port to the NXP i.MX RT, in the style of the
SAMD port It's largely based on the TinyUSB mimxrt implementation, using
the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over
the USB-VCP interface.
This commit also adds the NXP SDK submodule (also from TinyUSB) to
lib/nxp_driver.
Note: if you already have the tinyusb submodule initialized recursively you
will need to run the following as the tinyusb sub-submodules have been
rearranged (upstream):
git submodule deinit lib/tinyusb
rm -rf .git/modules/lib/tinyusb
git submodule update --init lib/tinyusb
Damien George
Krzysztof Adamski
Ayke van Laethem
Yonatan Goldschmidt
Mirko Vogt
stijn
Jim Mussared
Zoltán Vörös
Thorsten von Eicken
David Lechner
Damien George