Damien George
805fd0cfe6
docs/library: Remove "only" directive from all pyb module docs.
...
By virtue of its name, the pyb module would only be available on a pyboard
and so does not need to have conditional "only" directives throughout its
documentation.
These conditionals were added mostly in
cfcf47c064
in the initial development of the
cc3200 port, which had the pyb module before it switched to the machine
module. And wipy only conditionals were removed from the pyb module
documentation in 4542643025
, so there's no
need to retain any more conditionals.
2018-07-18 15:47:44 +10:00
Damien George
e708e87139
docs/library/pyb.rst: Add note about availability of USB MSC-only mode.
2018-02-01 15:52:49 +11:00
Alexander Steffen
c9a48eb464
docs,teensy: Use the name MicroPython consistently in documentation
2017-07-15 11:44:32 +02:00
Paul Sokolovsky
fbd252b77c
docs/{esp,pyb,ubinascii}: Use markup adhering to the latest docs conventions.
2017-06-27 00:38:05 +03:00
Damien George
27c149efe0
stmhal: Add pyb.fault_debug() function, to control hard-fault behaviour.
...
This new function controls what happens on a hard-fault:
- debugging disabled: board will do a reset
- debugging enabled: board will print registers and stack and flash LEDs
The default is disabled, ie to do a reset. This is different to previous
behaviour which flashed the LEDs and waited indefinitely.
2017-02-06 13:22:17 +11:00
Philip Potter
0f8b1ba8a2
docs/library: Add reference for pyb.usb_mode and pyb.USB_HID.
2016-08-29 15:17:20 +10:00
Mike Causer
ce166e6b68
docs: Spelling mistakes
2016-08-02 11:17:46 +03:00
Peter Hinch
c13b2f2d00
docs: Several minor changes: network, pyb, ADCAll and inline asm.
2016-01-13 21:53:26 +00:00
danicampora
4542643025
docs: Update all WiPy docs to reflect the new API.
2015-10-17 23:29:04 +02:00
Damien George
845b5a2a58
docs: Describe properly how MCU can be woken from pyb.standby() state.
2015-10-10 00:03:14 +01:00
Daniel Campora
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
Daniel Campora
cfcf47c064
docs: Add initial draft documentation for the WiPy.
...
This makes all common files "port-aware" using the .. only directive.
2015-06-10 23:37:56 +02:00
Damien George
dea853d3a3
docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup.
2015-04-21 22:35:17 +01:00
Damien George
e97dddcdca
docs: Document pyb.main function to set main script.
2015-04-09 10:08:25 +01:00
Damien George
d39c7aa517
stmhal: Add Python-configurable USB HID mode.
...
Different HID modes can be configured in Python. You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
Damien George
3990dcfcd7
docs: Add note about maximum frequency of busses.
2015-01-08 22:54:26 +00:00
Damien George
ddbcc79550
docs: Add quickref info about Servo; improve Servo docs.
2015-01-01 18:00:45 +00:00
Damien George
7690b13953
stmhal: Add ability to mount custom block device.
2014-12-27 20:20:51 +00:00
Damien George
008251180d
stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
...
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00
Damien George
38bd762121
stmhal: Improve pyb.freq to allow 8 and 16MHz (not usable with USB).
...
Also restrict higher frequencies to have a VCO_OUT frequency below
432MHz, as specified in the datasheet.
Docs improved to list allowed frequencies, and explain about USB
stability.
2014-11-02 15:10:15 +00:00
Damien George
a58713a899
docs: Cleanup and update some docs.
2014-10-31 22:21:37 +00:00
Damien George
88d3054ac0
docs: Import documentation from source-code inline comments.
...
The inline docs (prefixed with /// in .c files) have been converted to
RST format and put in the docs subdirectory.
2014-10-31 01:37:19 +00:00