f9d18d96b7
docs/library: Add framebuf documentation.
2017-03-07 18:16:46 +11:00
1f549a3496
docs/library/lcd160cr: Add note about supported JPEG format/encodings.
2017-02-28 17:45:24 +11:00
ed81574fe9
docs/machine: Fix formatting of Constants section.
...
Render related constants grouped together, with common description.
2017-02-28 00:38:15 +03:00
e2f1a8a7ee
docs/uhashlib: Provide port-neutral description.
...
TODO: Remove WiPy-specific chunks.
2017-02-26 00:55:33 +03:00
d80df91ef2
docs/library/lcd160cr: Mention the valid values for set_power() method.
2017-02-17 16:57:22 +11:00
ee3615d800
docs/uos: Remove mention of uos.sep.
...
MicroPython guarantees '/' to be a path separator, so extra constant taking
precious ROM space are not needed. MicroPython never had such constant, only
one vendor port had it (now unmaintained).
2017-02-14 13:14:46 +03:00
0c821f7def
docs/library/machine: Make separate TOC for WiPy vs non-WiPy.
...
WiPy is the only port with ADC and SD, so they shouldn't be included in
other ports' documentation.
2017-02-13 13:06:51 +11:00
2f76c3ca0a
docs/library/pyb.Pin: Minor typo fix, B6 should be A0.
...
On the PYBv1.0, X1 maps to A0, not B6.
2017-02-13 11:52:44 +11:00
27c149efe0
stmhal: Add pyb.fault_debug() function, to control hard-fault behaviour.
...
This new function controls what happens on a hard-fault:
- debugging disabled: board will do a reset
- debugging enabled: board will print registers and stack and flash LEDs
The default is disabled, ie to do a reset. This is different to previous
behaviour which flashed the LEDs and waited indefinitely.
2017-02-06 13:22:17 +11:00
d5e9ab6e61
extmod/machine_pulse: Make time_pulse_us() not throw exceptions.
...
machine.time_pulse_us() is intended to provide very fine timing, including
while working with signal bursts, where each transition is tracked in row.
Throwing and handling an exception may take too much time and "signal loss".
So instead, in case of a timeout, just return negative value. Cases of
timeout while waiting for initial signal stabilization, and during actual
timing, are recognized.
The documentation is updated accordingly, and rewritten somewhat to clarify
the function behavior.
2017-02-05 14:20:17 +03:00
50a9dd59f5
docs: For LCD160CR driver and tutorial, add link to positioning image.
2017-02-03 12:48:54 +11:00
0ddeedfc73
docs/uio: Typo fixes/lexical improvements.
2017-01-29 16:18:33 +03:00
ef6fb66d23
docs/uio: Describe differences between uPy an CPy stream hierarchy.
2017-01-28 16:35:40 +03:00
6947a7f6a9
docs/usocket: Dedent Methods section.
...
This was apparently of an ::only directive which was later removed.
2017-01-28 15:49:54 +03:00
f23c47fea7
docs/usocket: Clarify description of various methods.
2017-01-28 15:39:18 +03:00
74fcb122f0
docs/usocket: Elaborate "Constants" section.
2017-01-28 14:46:58 +03:00
59540dccf1
docs/usocket: Clarify exceptions used.
2017-01-28 13:55:51 +03:00
0aa83142a4
docs/machine: Add explicit note on machine module level and scope.
...
It's very low, hardware level, with associated constraints on operations
and callbacks.
2017-01-28 12:08:25 +03:00
56e7ebf07a
docs/machine.Timer: Move WiPy adhoc parts to its documentation.
2017-01-28 12:08:00 +03:00
c707668d9e
docs/library/lcd160cr: Fix set_brightness range, should be 0..31.
2017-01-24 00:17:39 +11:00
e72e343908
docs: Add documentation for lcd160cr module.
2017-01-23 14:37:10 +11:00
a79f6676c3
docs: Fix some minor spelling mistakes.
...
paramter -> parameter
send a receive -> send and receive
repsonse -> response
particualr -> particular
constructore -> constructor
2017-01-18 15:30:31 +11:00
a1a8f01799
docs/usocket: Clarify that socket timeout raises OSError exception.
2017-01-07 14:23:33 +03:00
36ec5c8f27
docs/library/esp: Remove para and add further warning about flash.
...
There is no longer space reserved by default for native code.
2017-01-06 18:32:49 +11:00
c3f70c603e
docs/library/esp: Document esp.set_native_code_location() function.
2017-01-04 23:48:19 +11:00
d377c83794
docs/library/machine.I2C: Fix I2C constructor docs to match impl.
2016-12-30 15:25:48 +11:00
a5b3c7e7f9
docs/library/pyb.UART: Moved writechar doc to sit with other writes.
2016-12-15 09:59:45 +11:00
0caac94b98
docs/library/pyb.UART: Added clarification about timeouts.
2016-12-15 09:59:32 +11:00
46e59c52af
docs/library/pyb.Accel: Add hardware note about pins used by accel.
2016-12-02 17:39:13 +11:00
63a5df3cb4
docs/library/machine.I2C: Refine definitions of I2C methods.
2016-11-23 17:05:02 +11:00
64db4080ce
docs/library/index: Elaborate on u-modules.
...
Also, remove an "only" directive in u-modules description.
2016-11-16 01:18:19 +03:00
a392b3aa75
docs: Remove references to readall() and update stream read() docs.
2016-11-14 23:31:40 +11:00
c4e58eaa98
stmhal/i2c: Add option to I2C to enable/disable use of DMA transfers.
...
New keyword option in constructor and init() method is "dma=<bool>".
DMA is now disabled by default for I2C transfers because it currently does
not handle I2C bus errors very well (eg if slave device doesn't ACK or
NACK correctly during a transfer).
2016-11-11 17:36:19 +11:00
3e5e4f95b2
docs/library/machine.Pin: Update Pin docs to align with new HW API.
2016-11-09 11:08:01 +11:00
805f7ea2f2
docs/utime: Add docs for ticks_add(), improvements for other ticks_*().
2016-11-01 00:14:12 +03:00
8679d9e6a6
docs/utime: Remove only:: for ticks_diff().
...
It's mandatory function which should be present in every port. Even if
it's not, in the stdlib intro we waarn users that a particular port can
lack anything of described in the docs.
2016-11-01 00:03:40 +03:00
d60ad5cf53
docs/utime: Describe new semantics of ticks_diff() (signed ring arithmetics).
2016-10-31 00:17:56 +03:00
153665f159
docs/utime: Document ticks_cpu() in more detail.
...
Also, drop ::only directive.
2016-10-30 23:15:28 +03:00
7219a18d17
docs/library/index: Update TOCs so builtins sorted before modules.
2016-10-30 23:13:52 +03:00
c28f9df63a
docs/library/network: Typo fixes, consistent acronym capitalization.
2016-10-28 12:03:35 +03:00
b9a88683a4
docs/library/network: Reword intro paragraph.
2016-10-28 04:42:27 +03:00
67c91df7e8
docs/machine.SPI.rst: Fix typos and formatting, clarify.
...
Clarify the class implements master side of the protocol, also put adhoc
WiPy paramter after the generic, described in the current Hardware API
version.
2016-10-25 17:03:35 +03:00
f1b2b1b600
docs/library/builtins: Add docs for delattr and slice.
2016-10-25 11:02:47 +11:00
266e4acdc2
docs/library/machine.SPI: Remove spurious "of".
2016-10-24 14:41:21 +11:00
f12047f66d
docs/machine.SPI: Improve descriptions of xfer methods.
...
In particular remove the "*" because not all ports support keyword
arguments.
2016-10-18 10:14:26 +11:00
a0b2f48c2f
docs/machine.SPI: Bring up to date with Hardware API, make vendor-neutral.
2016-10-17 18:05:16 +03:00
00c1fc6d77
docs/uos: Add uos.statvfs() documentation.
2016-10-07 13:16:54 +11:00
eb239b8398
stmhal/usb: Add support to receive USB HID messages from host.
2016-10-04 15:38:01 +11:00
219245e10f
extmod/machine_i2c: Add support for the addrsize parameter in mem xfers.
...
The memory read/write I2C functions now take an optional keyword-only
parameter that specifies the number of bits in the memory address.
Only mem-addrs that are a multiple of 8-bits are supported (otherwise
the behaviour is undefined).
Due to the integer type used for the address, for values larger than 32
bits, only 32 bits of address will be sent, and the rest will be padded
with 0s. Right now no exception is raised when that happens. For values
smaller than 8, no address is sent. Also no exception then.
Tested with a VL6180 sensor, which has 16-bit register addresses.
Due to code refactoring, this patch reduces stmhal and esp8266 builds
by about 50 bytes.
2016-09-28 14:45:29 +10:00
eeb9d99333
docs/library/machine: Update description of disable/enable IRQ funcs.
2016-09-23 13:15:58 +10:00
4ab3eef8d7
docs/library/pyb.SPI: init(): Describe "bits" argument.
...
Based on https://github.com/micropython/micropython/pull/2210 .
2016-09-18 21:41:21 +03:00
f3b5480be7
stmhal,cc3200,esp8266: Consistently use PWRON_RESET constant.
...
machine.POWER_ON is renamed to machine.PWRON_RESET to match other
reset-cause constants that all end in _RESET. The cc3200 port keeps a
legacy definition of POWER_ON for backwards compatibility.
2016-09-08 12:50:38 +10:00
4a9542c0c0
docs/library/machine.WDT: Add that WDT is available on pyboard.
2016-09-06 14:20:52 +10:00
0f8b1ba8a2
docs/library: Add reference for pyb.usb_mode and pyb.USB_HID.
2016-08-29 15:17:20 +10:00
64c5a9435c
docs/library/machine.WDT: Add note that WDT is only available on WiPy.
2016-08-17 14:22:39 +10:00
5c73de0337
docs/uio: Mention seek()/flush() support for io.BytesIO.
2016-08-09 01:52:56 +03:00
fdb411a8c5
docs/library/index: Include array module in ToC.
2016-08-07 00:16:41 +03:00
8a0b6f561c
docs/array: Document array module.
2016-08-07 00:13:48 +03:00
ce166e6b68
docs: Spelling mistakes
2016-08-02 11:17:46 +03:00
047ac2044d
docs/library: Fix typo in docs for usocket.listen().
2016-06-26 12:38:20 +01:00
2b6dcdd3e4
docs/sys: print_exception: Fixes/clarifications.
2016-06-18 19:06:53 +03:00
617e033e2f
docs/select: Add an article.
2016-06-18 19:06:42 +03:00
9de5eb278d
docs/sys: Detailed description of print_exception() diff from traceback module.
2016-06-10 23:06:56 +03:00
343b5c1081
docs/uctypes: Improve documentation.
...
Seealso and Limitations sectiosn added, better formatting and grammar.
2016-06-09 05:02:55 +03:00
79b40d1127
docs/machine*: Remove explicit targets and "machine." prefixes on classes.
...
With currentmodule:: set properly, none are needed. Extra "machine." prefix
produces wrong indexing data.
2016-06-09 03:03:53 +03:00
a0c296f6d5
docs/machine.Pin: Disambiguate object call method.
2016-06-09 02:58:15 +03:00
1d3b903eb5
docs/library/index: Add builtins.rst.
2016-06-09 00:26:44 +03:00
0cec4e9bb8
docs/builtins: Enumerate all builtin functions implemented.
...
Based on unix version. No descriptions so far.
2016-06-09 00:24:52 +03:00
f1eb672d88
docs/pyb.Pin: Sort .af() and .af_list() methods together.
2016-06-08 16:36:22 +03:00
a384a53130
docs/pyb.*: Use proper class case in method headers.
...
Class designator will be used as is in indexes, so must match actual class
name.
2016-06-08 16:21:28 +03:00
585aafc27e
docs/pyb.ExtInt,pyb.Pin: Mark up class methods as such.
2016-06-08 16:00:12 +03:00
0d8c22b122
docs/pyb.Pin: af_list() is a normal method, not a class method.
2016-06-08 15:57:46 +03:00
8171995ee9
docs/pyb.CAN: Mark CAN.initfilterbanks() as classmethod explicitly.
2016-06-08 15:49:30 +03:00
bba77a2d01
docs/machine.Pin: Add class designator to all constants.
...
This makes rendered docs to not provide incorrect information and
consistent with how it's down for other machine classes.
2016-06-08 01:37:03 +03:00
7d7243f44c
docs/machine.*: Use proper class case in method headers.
...
Class designator will be used as is in indexes, so must match actual class
name.
2016-06-08 01:33:49 +03:00
93968bd6fb
docs/machine.UART: Cleanup pyboard section.
2016-06-08 01:32:16 +03:00
0a4361ca67
docs/machine.Pin: Remove explicit target.
...
With currentmodule:: support, all targets should be generated properly by
Sphinx.
2016-06-08 01:13:59 +03:00
0a4cc24b2e
docs/pyb.*: Add "currentmodule:: pyb" directive.
...
Makes sure that classes described in these separate files are properly
designated as belonging to "pyb" module in indexes.
2016-06-08 00:57:41 +03:00
c8b7628094
docs/machine.*: Add "currentmodule:: machine" directive.
...
Makes sure that classes described in these separate files are properly
designated as belonging to "machine" module in indexes.
2016-06-08 00:46:27 +03:00
2c5fc681c8
docs/library/machine.Pin: Mention GPIO and cross-link .value() function.
2016-06-07 17:49:00 +03:00
6e2fa5237d
docs/usocket: There must be empty line after .only:: .
2016-06-07 17:41:21 +03:00
9b18811951
docs/ure: Typo fix.
2016-06-07 08:53:54 +03:00
753a965363
docs/esp.socket: Remove unused file.
2016-06-07 02:40:05 +03:00
9487b80666
docs/library/network: wipy: Fix literal block indentation.
2016-06-07 02:07:08 +03:00
ed4e5d2583
docs/library/index: Fix grammar and spelling in intro paragraph.
2016-06-02 11:05:13 +01:00
09f764dc04
docs/library/index: Add intro paragraph regarding availability of modules.
...
This introductions makes explicit the fact that whenever possible,
the documentation describes full MicroPython functionality, and arbitrary
functions/classes/modules may be missing in a paricular port or build.
2016-06-02 00:08:07 +03:00
c4ab8895e8
docs: math, cmath: Add port availability information.
2016-06-01 22:12:39 +03:00
1a05a59116
docs/math: Typo fix.
2016-06-01 22:09:51 +03:00
93a9c2e840
docs/library/machine: Add documentation for machine.time_pulse_us.
2016-05-31 14:06:33 +01:00
641300dccb
stmhal/dac: DAC deinit() method added.
2016-05-31 13:10:35 +03:00
a3dc2c6031
docs/machine: Make disable_irq and enable_irq docs available for all.
2016-05-26 15:47:47 +01:00
3e33aeb0db
docs: esp8266: Include ussl module in the docs.
2016-05-22 23:57:26 +03:00
bca4c9e465
docs/ussl: Add basic description of axTLS-based modussl.
...
In particular, disclose the fact that server certificates are not
validated.
2016-05-22 23:56:22 +03:00
ca63c77073
docs/ustruct: Describe supported type codes.
2016-05-14 20:48:43 +03:00
0c86a9471a
docs/machine.UART: Filter out unimplemented UART methods from esp8266 docs.
2016-05-07 20:20:04 +03:00
5036b6ad18
docs/library/machine.Pin: Update pin docs to reflect ESP8266 support.
2016-05-03 13:55:37 +01:00
81a99eb388
docs/machine: idle() description generalization.
2016-05-03 12:53:57 +03:00
bb6458bf43
docs/machine: More generic description of sleep's, WiPy details to its genref.
2016-05-03 12:48:20 +03:00
db99ae00a2
docs/machine: Move WiPy-specific hardware details to its general reference.
2016-05-03 12:26:55 +03:00
06ec96b47b
docs/machine: Generalize docs from just WiPy to other ports.
2016-05-03 12:15:29 +03:00
a6cf45864f
docs/network: esp8266: MAC address is set via .config() method.
2016-05-03 01:04:40 +03:00
ae845f13de
docs: Use getaddrinfo() result in easy way.
...
Instead of extracting 4th element, extact last. Much easier to remember!
2016-05-03 00:48:04 +03:00
c816b89353
docs/library/machine.I2C: Update to reflect ESP8266 implementation.
...
This machine.I2C documentation is now closer to a more port-neutral
description, although there are still differences between WiPy and
ESP8266.
2016-05-02 12:31:17 +01:00
621c644205
docs: _io and _collections were renamed to have standard "u" prefix.
2016-05-02 14:02:54 +03:00
70ff7350e7
stmhal, cc3200: Change i2c.scan() method to scan addresses 0x08-0x77.
...
A standard I2C address is 7 bits but addresses 0b0000xxx and 0b1111xxx
are reserved. The scan() method is changed to reflect this, along with
the docs.
2016-05-02 11:15:36 +01:00
8ebdbcfb27
docs: Add _io module reference.
2016-05-02 00:39:36 +03:00
348caaf940
docs: Add _collections module reference.
2016-05-02 00:36:58 +03:00
fd283eba64
docs/sys: Describe sys.platform is port-neutral manner.
2016-05-01 14:39:38 +03:00
e9b7610748
docs/sys: Describe sys.maxsize.
2016-05-01 14:31:08 +03:00
59603a2e89
docs/sys: Describe sys.implementation.
2016-05-01 13:59:34 +03:00
4fb9452bff
docs/sys: Clean up print_exception() description.
2016-05-01 13:44:06 +03:00
ad2889c141
docs/sys: Clarify description of sys.exit().
2016-05-01 13:42:36 +03:00
8ad1659f68
docs/sys: Make module variable descriptions proper sentences.
2016-05-01 13:38:45 +03:00
7781caf8d3
docs/sys: Remove port-specific details from description of stdin/out/err.
2016-05-01 13:37:28 +03:00
c468fe65c5
docs/ustruct: Fix argument formatting.
...
Per current CPython docs conventions, arguments are in italics. Follow
that.
2016-05-01 13:34:16 +03:00
a9ed42b3b4
docs/sys: Document sys.modules.
2016-05-01 13:32:15 +03:00
6b6acc5b5d
docs/ustruct: Document pack_into(), unpack_from().
2016-05-01 13:17:07 +03:00
83e99f88cb
docs/utime: Clarify module purpose.
2016-05-01 01:48:30 +03:00
613fd0a1ca
docs/library/utime: Elaborate on epochs and calendar time maintenance.
2016-05-01 00:16:47 +03:00
6d8156ae28
docs/network: esp8266: Describe wlan.config() method.
2016-04-28 00:11:55 +03:00
06deec9d35
docs/network: esp8266: Add wlan.ifconfig() method.
2016-04-28 00:10:29 +03:00
1b45670c69
docs/ubinascii: Clean up grammar.
2016-04-27 15:47:33 +03:00
df4e1d1279
docs/library: Consistently use admonitions for CPython differences.
2016-04-27 15:43:48 +03:00
31300b5144
docs/utime: Describe sleep() peculiarities in MicroPython.
...
Not all ports accept floating-point value.
2016-04-27 15:28:46 +03:00
c564169c8f
docs/utime: Describe time() peculiarities in MicroPython.
2016-04-27 15:23:11 +03:00
556e5dfd35
docs/library/utime: Add more time functions for unix and esp8266 ports.
2016-04-27 12:30:59 +01:00
e0f7e001e8
docs: Fix uos and utime heading underlines to be the correct length.
...
Otherwise Sphinx gives a warning.
2016-04-27 12:11:27 +01:00
351ec6d4ab
docs/library: "os" module is actually "uos".
2016-04-27 01:55:06 +03:00
0df2ee0126
docs/library/index: Order sections from the most to least standard modules.
2016-04-27 01:38:59 +03:00
492bf12499
docs/library/index: Make single section for "micro-ified" modules.
...
Even the modules whose names don't start with "u" prefix are micro-ified
anyway, i.e. provide only subset of CPython's functionality (and sometimes
extensions to it). So, it doesn't make much sense to devide them by
criteria of having/not having "u" prefix.
2016-04-27 01:38:59 +03:00
678f3a1e05
docs: Module "time" is actually "utime".
2016-04-27 01:38:59 +03:00
a119983328
docs/library/index: esp8266 has the same set of stdlibs as pyboard/unix.
2016-04-27 01:17:28 +03:00
88ed518390
docs/library/index: Move WiPy "micro-libraries" under corresponding heading.
2016-04-27 01:14:16 +03:00
8b8c32c09b
docs/library: Group MicroPython-specific modules under separate heading.
2016-04-27 01:11:24 +03:00
650df97c06
docs/network: esp8266: scan(): Add note that bssid is bytes object.
2016-04-26 01:09:11 +03:00
0d10e5310a
docs/usocket: Describe address format once at the beginning.
...
Different ports may have different formats.
2016-04-23 00:31:05 +03:00
92497bff94
docs/usocket: socket.IPPROTO_SEC is WiPy-specific.
2016-04-23 00:17:34 +03:00
955b8526f4
docs/usocket: Socket-specific exceptions are for WiPy only.
2016-04-23 00:17:09 +03:00
71c6f93016
docs/library/usocket: Add link to CPython's socket module.
2016-04-23 00:08:43 +03:00
bbe5245028
docs: esp8266: Include usocket module reference.
2016-04-23 00:08:11 +03:00
3bc9b571bb
docs/ustruct: There's no complete "struct" module, only "ustruct" subset.
...
"ustruct" is good example of micro-ified module, so rather should belong
to the corresponding list.
2016-04-22 22:37:14 +03:00
67ece47121
docs/machine: reset_cause() has been implemented for esp8266.
2016-04-17 17:40:08 +03:00
f474e956d7
docs/machine: Start to update for esp8266 port.
2016-04-15 17:06:11 +03:00
b122ed0732
docs/esp: Enumerate flash access functions.
2016-04-15 14:01:22 +03:00
22cbcd55f0
stmhal: Properly handle RTS/CTS flow control for buf/unbuf transfers.
...
Fixes issues #1912 and #1913 . UART documentation is also updated.
2016-04-13 08:42:32 +01:00
9c04299da1
docs: esp8266: Enable "machine" module docs.
...
The docs are still heavily biased towards WiPy, so will need a lot of
exclusions.
2016-04-07 16:44:10 +03:00
5e7fa7c80c
docs/ubinascii: Document non-standard "sep" argument to hexlify().
2016-04-07 12:39:00 +03:00
f81ea6307c
docs/ubinascii: Document a2b_base64(), b2a_base64().
2016-04-05 14:00:12 +03:00
28d4b94dce
docs/machine: Change wording to be a bit more port-neutral.
2016-04-03 20:49:29 +03:00
69b702276b
docs/os: Change wording to be a bit more port-neutral.
2016-04-03 20:49:25 +03:00
e24674d44e
docs: esp8266: esp.socket is deprecated, remove from docs.
2016-04-03 20:19:39 +03:00
f50d9477c1
docs: network: esp8266: .scan() is now synchronous and returns result list.
2016-03-30 11:56:20 +03:00
d7019d0628
docs: network: esp8266: status is WLAN object method.
2016-03-30 11:53:45 +03:00
193795398d
docs: Correct pin interrupt example code for the WiPy.
2016-03-28 13:12:58 +02:00
87c783b454
docs/esp8266: esp.mac() replaced with network.WLAN.mac().
2016-03-27 06:59:39 +03:00
679fe0abae
docs/esp8266: esp.wifi_mode() replaced with network.WLAN.active().
2016-03-27 06:59:00 +03:00
eda8746324
docs/esp8266: phy_mode() moved to network module.
2016-03-27 06:58:06 +03:00
e589cddcd4
docs/esp: Remove getaddrinfo(), now in socket module as expected.
2016-03-25 16:39:18 +02:00
6e6488530e
docs: More standard modules for esp8266.
2016-03-25 16:33:05 +02:00
4b5606bc09
docs/network: esp8266: Update docs on WLAN constructor.
2016-03-25 16:30:06 +02:00
ee6fcc6f91
docs: Add standard modules list for esp8266.
2016-03-25 15:17:55 +02:00
2b302dad51
docs: Update pyb.UART.any() to mention that it returns character count.
2016-03-17 20:19:36 +00:00
6d5a549067
docs: Mention that pyb.SPI constructor accepts "X" and "Y" arguments.
2016-03-17 20:19:08 +00:00
b8133c4c0f
docs: Update pyb.I2C constructor to reflect changes in Pyboard Lite.
2016-03-17 20:18:36 +00:00
85d3b6165a
docs: Update details on using ADCAll object for vref/vbat channels.
2016-03-11 16:33:09 +00:00
6bb9d3ea3e
docs/uctypes.rst: Fix typo (steamlined -> streamlined).
2016-03-02 00:25:10 +02:00
57b96a7be2
docs: Correct machine.Timer code examples related to duty cycle.
2016-02-23 20:22:26 +01:00
8e1fdf2eb3
docs: Add note on machine.Timer class regarding PWM output pins.
2016-02-23 19:53:59 +01:00
add930c4b5
cc3200: Rename 'server' class to 'Server' for consistency.
2016-02-22 22:54:34 +01:00
12547ce737
docs: Minor change to improve clarity in machine.Timer docs.
2016-02-22 19:16:30 +01:00
0d210a0be8
docs: Correct WiPy Timer docs.
2016-02-21 21:53:20 +01:00
73c9f85b4c
cc3200: Simplify the Timer API and correct the documents.
...
Make the PWM duty cycle configurable from 0.00 to 100.00 by
accepting values from 0 to 10000.
Add automatic Pin assignment when operating in PWM mode.
2016-02-21 21:53:16 +01:00
0f87a010e3
docs: Update to say that Timer(3) is free, and detail LED intensity.
2016-01-29 23:06:13 +00:00
c13b2f2d00
docs: Several minor changes: network, pyb, ADCAll and inline asm.
2016-01-13 21:53:26 +00:00
67f40fb237
docs: Include extra functions in time documentation for pyboard.
2016-01-04 22:57:21 +00:00
67a5bfc6d8
docs/library: Add network server example.
2015-12-16 22:35:14 +01:00
00960133c2
docs: Update docs for WiPy wlan.connect().
...
- The link establishment timeout is infinite by default
- Fix typo in notes about the auth kwarg
2015-11-18 19:47:40 +01:00
549c79d11e
docs/select: Document POLLIN/OUT/ERR/HUP.
2015-11-09 22:10:32 +02:00
43efb46328
docs/library/index.rst: Minimally adapt for unix port.
2015-10-31 01:15:25 +03:00
98b6d35c4f
docs: select: Describe poll.poll() return value in detail.
2015-10-29 22:08:10 +03:00
b7ab70c71c
docs: USB_VCP: Always in non-blocking mode, clarify stream method returns.
...
They return None if no data available.
2015-10-25 13:24:29 +03:00
cf6daa0966
docs: Explicitly specify behavior of UART stream protocol methods on timeout.
2015-10-25 08:25:34 +03:00
ee7bebc94f
docs: Correct machine.RTC examples.
2015-10-22 20:23:28 +02:00
4efed58df1
docs: Fix typos on wipy docs.
2015-10-22 16:35:04 +02:00
e954604ae0
docs: Add remark about ssl sockets and standard sockets.
2015-10-21 22:52:36 +02:00
ee0058d174
docs: Remove remaining references to 'af', which is now 'alt'.
2015-10-21 15:30:57 +02:00
ceb169008d
docs: Several corrections to the classes in the machine module.
2015-10-21 15:30:56 +02:00
04db848dc7
docs: Add usocket and ussl modules' documentation.
2015-10-21 15:30:56 +02:00
9c72c71c05
cc3200: WLAN class can retrieve the existing instance.
2015-10-19 21:17:15 +02:00
8faf2dc75b
docs/wipy: Add wipy tutorials section.
2015-10-19 21:17:15 +02:00
36ae417c9f
docs: Add wipy and network.server documentation.
2015-10-19 21:17:15 +02:00
4542643025
docs: Update all WiPy docs to reflect the new API.
2015-10-17 23:29:04 +02:00
d6442407f5
docs: Fix formatting of DAC code examples.
2015-10-13 14:44:00 +01:00
b5c43be135
stmhal: Allow to set bits resolution for DAC; 8 is default, can have 12.
...
This patch allows to configure the DAC resolution in the constructor and
in the init function, eg:
dac = DAC(1, bits=12).
The default resolution is 8 bits for backwards compatibility. The bits
sets the maximum value accepted by write and write_timed methods, being
2**bits - 1.
When using write_timed with 12-bit resolution, the input buffer is
treated as an unsigned half-word array, typecode 'H'.
See PR #1130 for discussion.
2015-10-13 14:33:04 +01:00
845b5a2a58
docs: Describe properly how MCU can be woken from pyb.standby() state.
2015-10-10 00:03:14 +01:00
37ab061f4d
docs: Update esp8266 documentation to match the code.
...
* Move the esp.status() to network module.
* Describe the wifi.isconnected() method.
* Describe esp.mac(), esp.wifi_mode(), esp.phy_mode(), esp.sleep_type(),
esp.deepsleep(), and esp.flash_id() functions.
2015-10-06 23:25:35 +01:00
861fad5819
docs: Adapt WiPy's ADC doc and quickref to the new API.
2015-09-16 10:10:40 +02:00
aba75e1233
cc3200: New SPI API.
2015-09-16 10:10:33 +02:00
624cdeacc4
docs/wipy: Add pins to the I2C constructor.
2015-09-16 10:10:31 +02:00
41f6948545
cc3200: New WDT API.
2015-09-16 10:10:29 +02:00
Rami Ali
Peter Hinch
Paul Sokolovsky
Damien George
Dave Hylands
Mike Causer
Lorenz Schmid
Alex March
Philip Potter
Radomir Dopieralski
Martin Müller
danicampora
Noah Rosamilia
Henrik Sölver
Noah