c5563aa024
rp2/mpconfigport: Make networking options consistent across boards.
...
Enable the same set of networking features on boards with wifi/ethernet.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:28:44 +10:00
2efaebc899
rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Add urequests module.
...
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:03:02 +10:00
3d76292f37
rp2/boards/GARATRONIC_PYBSTICK26_RP2040: Change pico-sdk board name.
...
This follows a similar renaming in pico-sdk.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 09:45:44 +10:00
99c2589778
rp2/boards/PICO_W: Add new Pico W board, an RP2040 with WiFi.
...
Work done in collaboration with Graham Sanderson and Peter Harper.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:51 +10:00
de823e7741
rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable Arduino 1200bps touch.
2022-06-23 14:32:56 +10:00
cedb93c179
docs: Update Raspberry Pi URLs from .org to .com.
2022-06-14 11:41:13 +10:00
9670a156da
all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
...
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
2111ca0b8f
rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Update USB PID.
...
This PID is allocated for the Arduino Nano RP2040 running MicroPython.
2022-06-03 16:12:44 +10:00
1b80aa9ce3
rp2/boards/W5100S_EVB_PICO: Add Wiznet W5100S-EVB-Pico board.
...
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
875caca504
rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable webrepl.
2022-05-25 16:05:50 +02:00
a22d0bda52
rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Disable internal errno.
...
* Internal errno can't be used with Nina module due to an issue
with esp-idf config.
2022-05-25 16:05:50 +02:00
5c32111fa0
ports: Reformat more C and Python source code.
...
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
507ad03329
rp2: Add USB MSC support.
...
It is currently not enabled by default on any board.
2022-03-09 00:38:07 +11:00
000b001fc1
rp2/boards/GARATRONIC_PYBSTICK26_RP2040: Use correct pico-sdk board cfg.
...
Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 16:50:20 +11:00
908e4cf5c3
rp2: Add support for DHT11 and DHT22 sensors.
2022-01-06 14:00:03 +11:00
f4487a0049
rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Set default I2C pins.
2022-01-06 13:35:20 +11:00
c422ca3da1
rp2/boards: Add PYBSTICK26 RP2040 board definition.
2021-11-25 21:05:21 +11:00
172a031dff
rp2/boards/PIMORONI_PICOLIPO_16MB: Fix 16MB flash size.
...
Was incorrectly added as 7MB for an 8MB SPI flash, but this board has a
16MB chip, not 8MB, so it should be 15MB leaving 1MB for MicroPython.
Thanks to @robert-hh
2021-11-19 15:34:07 +11:00
5ed7a748f0
rp2/boards: Add neopixel.py to manifest.py.
...
Because machine.bitstream is now implemented on the rp2 port.
2021-11-17 10:02:32 +11:00
c3dceb1c32
rp2/boards: Add support for Arduino Nano RP2040.
2021-11-16 15:05:10 +11:00
7f14344428
ports: Add images, features and urls to board.json.
2021-10-28 15:25:38 +11:00
e359b077dd
ports: Add board.json for all boards.
...
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.
Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
71722c84ca
rp2/boards: Add Pimoroni Tiny 2040.
2021-08-01 23:07:57 +10:00
042a4bebc3
rp2/boards: Add Pimoroni Pico LiPo 16MB.
2021-08-01 23:07:05 +10:00
95eff8d96a
rp2/boards: Add Pimoroni Pico LiPo 4MB.
2021-08-01 23:06:06 +10:00
02cbe018a5
rp2/boards: Add Adafruit QT Py RP2040.
2021-08-01 23:04:59 +10:00
043848158d
rp2/boards: Add Adafruit ItsyBitsy RP2040.
2021-08-01 23:03:30 +10:00
e7a3e6ee6a
rp2/boards/SPARKFUN_THINGPLUS: Configure I2C/SPI default pins.
2021-08-01 23:02:30 +10:00
6986a8d680
rp2/boards/SPARKFUN_PROMICRO: Configure UART/I2C/SPI default pins.
2021-08-01 23:01:36 +10:00
49497084f1
rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure I2C/SPI default pins.
2021-08-01 17:15:18 +10:00
23e2e00779
rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure custom VID/PID.
2021-08-01 10:51:50 +10:00
8172c2e9c5
rp2: Move manifest.py to boards directory.
...
To match other ports.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-04 23:39:24 +10:00
d80a037e6b
rp2/boards: Add board definition for SparkFun Pro Micro board.
2021-05-02 23:23:27 +10:00
3c918d0f58
rp2/boards: Add board definition for SparkFun Thing Plus RP2040.
2021-05-02 23:22:46 +10:00
7ca686684e
rp2: Add support for building different board configurations.
...
This change allows to build firmware for different rp2-based boards,
following how it is done in other ports like stm32 and esp32. So far only
the original Pico and Adafruit Feather RP2040 are added. Board names
should match (sans case) those in pico-sdk/src/boards/include/boards/.
Usage: Pico firmware can be build either using make as previously (it is
the default board) or by `make BOARD=PICO`. Feather is built by `make
BOARD=ADAFRUIT_FEATHER_RP2040`. Only the board name and flash drive size
is set, pin definition is taken from the appropriate pico-sdk board
definition. Firmware is saved in the directory build-BOARD_NAME.
2021-04-12 21:40:32 +10:00
Jim Mussared
Damien George
iabdalkader
Andrew Scheller
Andrew Leech
Frédéric Pierson
Mike Causer
robert-hh
Jan Jurgen Griesfeller
jahr