Commit Graph

17 Commits

Author SHA1 Message Date
Damien George e4650125b8 esp32: Update port to support IDF v5.0.2.
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).

Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.

The following components have been verified to work on the various SoCs:

                ESP32     ESP32-S2  ESP32-S3  ESP32-C3
    build       pass      pass      pass      pass
    SPIRAM      pass      pass      pass      N/A
    REPL (UART) pass      pass      pass      pass
    REPL (USB)  N/A       pass      pass      N/A
    filesystem  pass      pass      pass      pass
    GPIO        pass      pass      pass      pass
    SPI         pass      pass      pass      pass
    I2C         pass      pass      pass      pass
    PWM         pass      pass      pass      pass
    ADC         pass      pass      pass      pass
    WiFi STA    pass      pass      pass      pass
    WiFi AP     pass      pass      pass      pass
    BLE         pass      N/A       pass      pass
    ETH         pass      --        --        --
    PPP         pass      pass      pass      --
    sockets     pass      pass      pass      pass
    SSL         pass      ENOMEM    pass      pass
    RMT         pass      pass      pass      pass
    NeoPixel    pass      pass      pass      pass
    I2S         pass      pass      pass      N/A
    ESPNow      pass      pass      pass      pass
    ULP-FSM     pass      pass      pass      N/A
    SDCard      pass      N/A       N/A       pass
    WDT         pass      pass      pass      pass

Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-23 15:34:22 +10:00
Damien George 53cb073571 esp32,esp8266: Change network.WLAN from a function to a type.
When the network module was first introduced in the esp8266 port in
ee3fec3167 there was only one interface (STA)
and, to save flash, the WLAN object was aliased to the network module,
which had just static methods for WLAN operations.  This was subsequently
changed in 9e8396accb when the AP interface
was introduced, and the WLAN object became a true class.

But, network.WLAN remained a function that returned either the STA or AP
object and was never upgraded to the type itself.  This scheme was then
copied over to the esp32 port when it was first introduced.

This commit changes network.WLAN from a function to a reference to the WLAN
type.  This makes it consistent with other ports and network objects, and
allows accessing constants of network.WLAN without creating an instance.

Signed-off-by: Damien George <damien@micropython.org>
2023-05-18 14:52:28 +10:00
glenn20 1093dea709 esp32,esp8266: Add support to set/get power saving mode of WLAN.
For esp32 and esp8266 this commit adds:
- a 'pm' option to WLAN.config() to set/get the wifi power saving mode; and
- PM_NONE, PM_PERFORMANCE and PM_POWERSAVE constants to the WLAN class.

This API should be general enough to use with all WLAN drivers.

Documentation is also added.
2023-05-06 13:51:00 +10:00
Glenn Moloney 7fa322afb8 esp32,esp8266: Add support for the Espressif ESP-NOW protocol.
ESP-NOW is a proprietary wireless communication protocol which supports
connectionless communication between ESP32 and ESP8266 devices, using
vendor specific WiFi frames.  This commit adds support for this protocol
through a new `espnow` module.

This commit builds on original work done by @nickzoic, @shawwwn and with
contributions from @zoland.  Features include:
- Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO.
- Signal strength (RSSI) monitoring.
- Core support in `_espnow` C module, extended by `espnow.py` module.
- Asyncio support via `aioespnow.py` module (separate to this commit).
- Docs provided at `docs/library/espnow.rst`.

Methods available in espnow.ESPNow class are:
- active(True/False)
- config(): set rx buffer size, read timeout and tx rate
- recv()/irecv()/recvinto() to read incoming messages from peers
- send() to send messages to peer devices
- any() to test if a message is ready to read
- irq() to set callback for received messages
- stats() returns transfer stats:
    (tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts)
- add_peer(mac, ...) registers a peer before sending messages
- get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt)
- mod_peer(mac, ...) changes peer info parameters
- get_peers() returns all peer info tuples
- peers_table supports RSSI signal monitoring for received messages:
    {peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...}

ESP8266 is a pared down version of the ESP32 ESPNow support due to code
size restrictions and differences in the low-level API.  See docs for
details.

Also included is a test suite in tests/multi_espnow.  This tests basic
espnow data transfer, multiple transfers, various message sizes, encrypted
messages (pmk and lmk), and asyncio support.

Initial work is from https://github.com/micropython/micropython/pull/4115.
Initial import of code is from:
https://github.com/nickzoic/micropython/tree/espnow-4115.
2023-05-01 16:47:21 +10:00
Jim Mussared eb51ca4a11 esp32: Use extmod/modnetwork.c instead of port-specific version.
Rather than duplicating the implementation of `network`, this allows ESP32
to use the shared one in extmod.  In particular this gains access to
network.hostname and network.country.

Set default hostnames for various ESP32 boards.

Other than adding these two methods and the change to the default hostname,
there is no other user-visible change.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:26:54 +11:00
robert-hh d6bc34a13a esp32: Add a small delay before leaving wlan.active().
The delay is 1 ms. It avoids the crashes reported by the
issues #8289, #8792 and #9236 with esp-idf versions >= 4.2, but does
not solve an underlying problem in the esp-idf.
2023-01-19 21:31:46 +01:00
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
glenn20 76f2e3e62b esp32/network_wlan: Add support to set/get the wifi protocol.
Add 'protocol' option to WLAN.config() to support setting/getting the wifi
protocol modes: MODE_11G|MODE_11G|MODE_11N.
2022-08-23 16:32:30 +10:00
glenn20 98d1c50159 esp32/network_wlan: Use esp_wifi_set/get_channel to config wifi channel.
Set the channel with esp_wifi_set_channel(), which adds support for setting
the channel of the STA interface

Get the channel with esp_wifi_get_channel() which returns the actual wifi
channel of the radio, rather than the configured channel.
2022-08-23 16:28:49 +10:00
IhorNehrutsa 1ea82b6dcc esp32,esp8266: Rename WLAN dhcp_hostname config to hostname.
But retain old name for backwards compatibility.
2022-07-05 23:40:32 +10:00
Damien George ccaf197807 esp32/network_wlan: Don't raise exception when scan returns no results.
Prior to this commit, running scan() without any APs available would give:

    >>> wl.scan()
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    RuntimeError: Wifi Unknown Error 0x0102

Signed-off-by: Damien George <damien@micropython.org>
2022-06-28 13:18:07 +10:00
iabdalkader a7c7febe0b esp32/network_wlan: Rename WLAN keyword args to ssid/security/key.
The WLAN.config() method now supports "ssid", "security" and "key" as
aliases to the existing "essid", "authmode" and "password", which are now
deprecated.

Addresses issue #8083.
2022-06-17 21:43:44 +10:00
wemos ff28d2e3b3 esp32/network_wlan: Support setting/getting txpower in WLAN.config(). 2022-04-22 21:52:28 +10:00
Damien George 5adb1fa40e esp32,esp8266: Extract qstr from object when comparing keys in config().
Following on from a previous fix for the same problem made in
3a431fba50.

Fixes issue #8052.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 14:27:13 +11:00
Damien George ea186de4c5 esp32: Split out WLAN code from modnetwork.c to network_wlan.c.
To match network_lan.c and network_ppp.c, and make it clear what code is
specifically for WLAN support.

Also provide a configuration option MICROPY_PY_NETWORK_WLAN which can be
used to fully disable network.WLAN (it's enabled by default).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:41:35 +10:00