4542643025
docs: Update all WiPy docs to reflect the new API.
2015-10-17 23:29:04 +02:00
fca3308cc3
cc3200: Improvements to terminal duplication.
2015-10-17 23:21:44 +02:00
e19dfe1c32
cc3200: In scan results rename 'auth' field to 'sec'.
...
As defined by the new API, since 'auth' is actually a tuple
composed by the security type and the key.
2015-10-17 23:21:44 +02:00
0334058fa4
Rename "Micro Python" to "MicroPython" in REPL, help, readme's and misc.
2015-10-12 00:06:25 +01:00
1b586f3a73
py: Rename MP_BOOL() to mp_obj_new_bool() for consistency in naming.
2015-10-11 15:18:15 +03:00
ff736d6f6f
cc3200: WiPy SW v1.0.0 release.
2015-09-28 00:14:25 +02:00
b6bdb0dbda
cc3200: Always reset WLAN after setting the mode.
2015-09-27 20:12:42 +02:00
ed6a5b78ad
cc3200: Make auth param positional in wlan.connect.
2015-09-27 19:10:09 +02:00
eb9a3ec654
cc3200: Disable uheapq and uhashlib.
...
Those two are rarely used features and better to have the extra heap.
2015-09-27 18:04:11 +02:00
37a2015cc5
tests/wipy: Add machine module tests.
2015-09-27 17:35:58 +02:00
c92e6a45eb
cc3200: Rename pyb module to machine.
2015-09-27 16:50:27 +02:00
ef369249cb
cc3200: Implement support for os.dupterm().
2015-09-27 11:27:24 +02:00
a7261ae059
cc3200/mods: Use mp_obj_get_array_fixed_n() where applicable.
2015-09-27 09:28:27 +02:00
635ef16432
cc3200/tools: Improve update script robustness.
2015-09-27 02:00:46 +02:00
57fa14b5be
cc3200: New WLAN API including test.
2015-09-27 01:50:52 +02:00
dbdcb58d64
cc3200: New irq API, affects all classes that provide the irq method.
2015-09-27 01:48:20 +02:00
dffa9f6da6
cc3200: New SD and RTC API plus os and time modules' extensions.
2015-09-21 22:30:32 +02:00
06d93b36f9
cc3200: Correct safe boot level 1 blinking period.
2015-09-21 22:30:04 +02:00
22b4c28f85
cc3200: New ADC API.
2015-09-16 10:10:38 +02:00
0e52d9860a
tests/wipy: Improve I2C tests.
2015-09-16 10:10:35 +02:00
aba75e1233
cc3200: New SPI API.
2015-09-16 10:10:33 +02:00
624cdeacc4
docs/wipy: Add pins to the I2C constructor.
2015-09-16 10:10:31 +02:00
41f6948545
cc3200: New WDT API.
2015-09-16 10:10:29 +02:00
8332044f75
cc3200: Add UART.ODD and UART.EVEN to select parity.
2015-09-16 10:10:26 +02:00
d5ec336eef
cc3200: Replace Pin.PULL_NONE with None.
2015-09-16 10:10:24 +02:00
e77abc261b
cc3200: Default peripheral ID support on I2C.
2015-09-16 10:10:19 +02:00
c69642a460
cc3200: Increase error led blynk period to 100ms
2015-09-16 10:10:17 +02:00
3c4b78e166
cc3200: Keep overwriting the same image on sequential updates.
2015-09-16 10:10:15 +02:00
7d6b6f6681
cc3200: Make UART choose default id when not given.
2015-09-16 10:10:13 +02:00
4ba9b34012
cc3200: Reduce servers cycle time to improve FTP transfer rate.
2015-09-16 10:10:11 +02:00
f352fe82a5
tests/wipy: Add I2C tests.
2015-09-10 08:00:59 +02:00
7c87747db0
cc3200: Disable some uPy features in debug mode to help code fit.
2015-09-10 08:00:47 +02:00
425958b616
cc3200: Add SDcard pin af on index 8.
2015-09-10 08:00:41 +02:00
d936317143
cc3200: New I2C API.
2015-09-10 08:00:30 +02:00
359b4e9ed9
cc3200: Refactor pin af assigment functions.
2015-09-10 08:00:24 +02:00
1d399c3c88
cc3200: Improve file system check routine.
2015-09-10 08:00:18 +02:00
4d7fa05b43
cc3200: Improve Pin and UART implementation.
...
Deassign pins af before assigning. Make uart.any() return the
correct value everytime, this requires interrupts to be always
enabled.
2015-09-10 08:00:12 +02:00
4054c4eadd
cc3200: Remove I2C inline documentation (sphinx is on the lead).
2015-09-10 08:00:05 +02:00
f91f212d9f
cc3200: New UART API plus related test.
2015-09-10 07:59:47 +02:00
36821d095a
cc3200: Add alternate functions list to Pin object.
...
Also remove pin.high() and pin.low() methods.
2015-09-10 07:59:41 +02:00
d5e256486e
cc3200: Re-work Pin class according to the new API.
...
Also add relevant test.
2015-09-10 07:59:35 +02:00
42054c3cad
cc3200: Add mphal error to raise hardware related exceptions.
2015-09-10 07:59:29 +02:00
598aad2140
cc3200: Fix bug in pybsleep remove.
2015-09-10 07:59:23 +02:00
475c60eefc
cc3200: Add alt param to Pin constructor.
2015-09-10 07:59:16 +02:00
86854c7071
cc3200: Adapt smoke.py for the new pin API.
2015-09-10 07:59:10 +02:00
e3f8777ee8
cc3200: Implement new Pin API.
2015-09-10 07:59:03 +02:00
ec8589e4c9
cc3200: Improve uniflash script and make it a bit more verbose.
2015-09-10 07:56:48 +02:00
b864e7afe4
cc3200: Remove the UART0 programming pins from the smoke test.
2015-09-10 07:56:46 +02:00
0e978349a5
cc3200: Correct smoke test expected result.
2015-08-16 20:18:16 +02:00
e9fa7625f4
cc3200: Correct WLAN constructor argument checking.
2015-08-16 20:18:13 +02:00
c0c07fb1b6
cc3200: Don't clear the WDT special bit in the bootloader.
2015-08-16 20:18:11 +02:00
aa8e8acb7d
cc3200: Change HeartBeat period from 5 to 4 seconds.
2015-08-16 20:18:09 +02:00
f837d166e5
cc3200: Fix typo in modpyb.
2015-08-16 20:18:07 +02:00
9249242119
cc3200: Remove unneeded loops in the FreeRTOS hooks.
2015-08-16 20:18:05 +02:00
641a3d39e1
cc3200: Make sure to update sleep objects when registered.
2015-08-16 20:18:02 +02:00
6ff2d54347
cc3200: Small renaming in wdt functions for the sake of consistency.
2015-08-16 20:18:00 +02:00
11d21081b4
cc3200: Rework SD API. Increase heap to avoid malloc failures.
2015-08-16 20:17:58 +02:00
34c290b678
cc3200: Rename SPI nss param to cs.
...
The nss param in the pyboard has a different meaning that doesn't
apply to the WiPy.
2015-08-16 20:17:55 +02:00
ea5061e409
cc3200: Improve callback API.
...
Rename "wakes" param to "wake_from" and make "value" an object
instead of an integer.
2015-08-16 20:17:52 +02:00
4c5bfe2d10
cc3200: Server side SSL socket requires both certfile and keyfile.
2015-08-16 20:17:49 +02:00
7027fd5343
cc3200: Make ADC API compatible with the pyboard.
2015-08-10 23:42:05 +02:00
7da2fdc3cd
cc3200: On the first boot, always make AP ssid='wipy-wlan'.
...
On the first boot don't add the MAC address, this is to speed up
factory testing.
2015-08-09 22:16:45 +02:00
2673374d18
cc3200: Refactor PRCM special user bits implementation.
2015-08-09 22:15:18 +02:00
651c870d77
cc3200: Speed up file system checking during start-up.
2015-08-09 22:09:16 +02:00
aa3569cd57
cc3200: Add factory smoke test as part of the tools.
2015-08-09 19:22:26 +02:00
8cd9fedf58
cc3200: Add script to program the WiPy via UniFlash (windows only...).
2015-08-09 19:22:23 +02:00
e23ae63970
cc3200: Fix bug in ffconf regarding '/flash' string length.
...
This bug was introduced when renaming '/sflash' to '/flash'.
2015-08-09 19:22:21 +02:00
31f6a6fa70
cc3200: Enable bootloader safe boot on latest firmware.
...
The first safe boot level executes the latest firmware but skips
'main.py' and 'boot.py'.
2015-08-09 19:22:19 +02:00
e54a4f1f48
cc3200: Improve support for WEP security.
...
Key is always entered as a string, but if security is WEP, the key
is converted automatically to hex before connecting or configuring
the device as an AP.
2015-08-09 19:22:16 +02:00
00c4d6562e
cc3200: Add nic.iwconfig() to set/get WLAN configuration.
...
Changes are based on this post:
https://github.com/micropython/micropython/issues/876#issuecomment-115255551
The constructor can optionally take the same params of iwconfig in
order to configure WiFi when creating the object. Params are
keyworkd only. The WiPy accepts:
- mode (int -> WLAN.AP or WLAN.STA)
- ssdi (string)
- security (int -> WLAN.OPEN, WLAN.WEP, WLAN.WPA, WLAN.WPA2)
- key (string)
- channel (int (1-11))
- antenna (int -> WLAN.INTERNAL, WLAN.EXTERNAL)
2015-08-09 19:22:12 +02:00
c6926c374d
cc3200: Make I2C and SPI API the same as in stmhal.
2015-08-02 20:22:15 +02:00
aa58c7ec74
cc3200: Append last 2 bytes of the MAC address to the default SSID.
2015-07-30 00:43:16 +02:00
b56634e691
cc3200: On ssl.read() or ssl.readall() ignore ssl layer closed error.
2015-07-30 00:43:14 +02:00
fb3f9cff33
cc3200: Switch to 1 byte hash for QSTRs.
2015-07-30 00:43:13 +02:00
9a348fc840
cc3200: Add socket.makefile()
2015-07-30 00:43:10 +02:00
007878781c
cc3200: Rename pins from GPIO to just GP.
...
This is how the names will be printed on the sticker that goes on top
of the EMI shield. The shorter names also help saving a few bytes of
RAM and ROM.
2015-07-30 00:43:08 +02:00
f22b35e4e5
cc3200: Add socket.sendall() (aliases to send()).
...
Simplelink's socket send checks for the size of the packet and sends
it in chunks if the size is too large.
2015-07-17 11:38:01 +02:00
a243d6b057
cc3200: Make socket stream methods return POSIX error codes.
2015-07-16 22:39:35 +02:00
f738424403
cc3200: Remove superflous assignment since the result is not used.
2015-07-15 14:45:24 +02:00
753a8e8bc4
cc3200: Create /flash/cert folder if it doesn't exist.
2015-07-15 14:25:35 +02:00
e955089da0
cc3200: Implement new OTA mechanism with 2 firmware update slots.
2015-07-15 14:25:28 +02:00
cf814b2d34
cc3200: Refactor and clean-up socket closing code.
2015-07-10 11:37:50 +02:00
ecb7f9fe58
cc3200: Set simplelink time and date when enabling WLAN.
2015-07-10 11:37:48 +02:00
fa47bebfbc
cc3200: Add struct weak link for ustruct.
2015-07-10 11:37:46 +02:00
af33ebb13b
cc3200: Increment telnet Tx retry delay on every try.
2015-07-09 17:30:17 +02:00
9220dc466a
cc3200: Correct udelay us to ticks calculation.
2015-07-08 13:13:37 +02:00
d18ced9cdd
cc3200: Use alternative HAL_Delay also when interrupts are disabled.
2015-07-08 12:48:35 +02:00
a0a3de60be
cc3200: Translate simplelink's socket error numbers to POSIX values.
2015-07-07 16:13:54 +02:00
5685b565c3
cc3200: Create /flash/sys and /flash/lib directories while booting.
2015-07-07 16:13:40 +02:00
76e52b5daf
cc3200: Make update-wipy.py more robust.
2015-07-07 16:11:48 +02:00
fa655ce196
cc3200: Improve interrupt handling and fix bug in HAL_Delay().
2015-07-07 16:11:05 +02:00
194c8c761e
cc3200: Increment interrupt stack size from 2K to 3K.
2015-07-07 16:10:10 +02:00
aaf7c5b35e
cc3200/README.md: Improve make deploy instructions.
2015-07-04 16:39:05 +02:00
c030e77861
cc3200: Enable base64 methods from modubinascii.
2015-07-04 16:33:54 +02:00
219a74c014
cc3200/README.md: Add notes about deploying a new software version.
2015-07-04 16:32:49 +02:00
31b40eebe8
cc3200: Fix socket recv and recvfrom return value type.
2015-07-02 23:17:22 +02:00
5161239c9f
cc3200: time.sleep() now receives seconds, like CPython.
2015-07-02 17:23:22 +02:00
9a65fa304c
cc3200: Add modussl, ssl sockets subclassed from normal sockets.
...
Stream methods were added to normal sockets as in the unix port.
2015-07-02 16:30:00 +02:00
7c1c9af5d4
cc3200: Code clean-up on pybpin.
2015-07-02 16:29:51 +02:00
4f8eeaedef
cc3200: Set WLAN date/time via the rtc.datetime method().
...
WLAN needs time info when validating certificates.
2015-07-02 16:29:43 +02:00
d680e28a11
cc3200: Optimize check for WLAN AP mode.
2015-07-02 16:15:59 +02:00
7fd538c1b6
cc3200: Raise an exception if trying to scan for networks in AP mode.
2015-07-02 15:03:58 +02:00
f522849a4d
cc3200: Add socket.timeout and socket.error exceptions.
2015-07-02 11:53:15 +02:00
70fc42cb28
cc3200: Add CA, certificate and key files to the updater list.
2015-06-30 22:11:15 +02:00
5ebf39784a
cc3200: Correct socket settimeout time format.
2015-06-29 11:01:11 +02:00
4f5b896a0b
cc3200: Adapt update-wipy.py timing to improve stability.
2015-06-28 14:14:24 +02:00
813b581127
cc3200: Add `Pin.name()` method.
2015-06-28 14:14:22 +02:00
778413168b
cc3200: Enable more features to improve compatibility with stmhal.
2015-06-28 14:14:20 +02:00
d02f671737
cc3200: Add deploy target and improve robustness of update-wipy.py.
2015-06-24 15:26:05 +02:00
e64afde073
cc3200: Create tools folder and add update-wipy.py script.
...
This script is used by Jenkins to update the WiPy with the newly
built firmware before running the tests. It's not placed in the
common tools folder because it is very WiPy specific.
2015-06-24 12:36:38 +02:00
92d95cc9d3
cc3200: Remove --specs=nano.specs linker flag.
2015-06-18 09:01:37 +02:00
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
cdfa11f550
cc3200: In Timer.callback() only use value param if in edge count mode.
2015-06-16 15:34:46 +02:00
f28ed55aeb
cc3200/README.md: Specify the board name in the build command.
2015-06-11 09:26:36 +02:00
b630de1103
cc3200: Rename os.mkdisk() to os.mkfs().
2015-06-10 23:35:45 +02:00
1811c6bccf
cc3200: Remove Timer.AB constant.
...
Timer.A and Timer.B can be ORed for this purpose.
2015-06-10 23:35:43 +02:00
e2dc7ac2a9
cc3200: Clarify notes about the extended functionality of uhashlib.
2015-06-10 23:35:41 +02:00
95cc1ff542
cc3200: Re-name pyb.hard_reset() to pyb.reset().
2015-06-10 23:35:40 +02:00
330e21c986
cc3200: Use the pull up/down resistors on the antenna selection pins.
2015-06-10 23:35:38 +02:00
f960d753e4
cc3200: Fix bootloader build error.
2015-06-10 23:35:36 +02:00
3319780e96
cc3200: Add sendbreak method to the UART.
2015-06-10 23:35:35 +02:00
8a6d93aeed
cc3200: Make UART API more similar to stmhal.
2015-06-10 23:35:33 +02:00
640d00ea9d
cc3200: Change MP_OBJ_NULL for mp_const_none in params default value.
2015-06-10 23:35:32 +02:00
071d47fa3b
cc3200: Only kick the WDT if it's actually running.
2015-06-10 23:35:30 +02:00
6148f8b7d2
cc3200: Add contructor to the HeartBeat class.
2015-06-10 23:35:28 +02:00
371f4ba6b3
cc3200: Wrap antenna_init0() with #if MICROPY_HW_ANTENNA_DIVERSITY.
2015-06-08 10:38:19 +02:00
491c321720
cc3200: Re-config antenna selection when waking from suspended mode.
2015-06-07 13:28:47 +02:00
b4a41a8f70
cc3200: Add missing antenna diversity source files.
2015-06-07 00:42:40 +02:00
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
a3cf4ea2f6
cc3200: Do not kick the watchdog inside the idle task.
2015-06-04 10:13:55 +02:00
71f85cc330
cc3200: Close ftp and telnet server sockets if listening fails.
2015-06-04 10:13:53 +02:00
cc20482aa9
cc3200: Add method to configure the servers timeout.
...
With network.server_timeout(secs) the timeout can be changed.
The default value is 300 secs. Minimmum accpeted is 5 secs.
Without params the function returns the current configured timeout.
2015-06-03 17:31:21 +02:00
2ffb6e1b15
cc3200: Fix 'MP_QSTR_sd' undeclared error when building for the LAUNCHXL.
2015-06-02 13:11:01 +02:00
84d11b5e53
cc3200: Add period set method to the Timer class.
2015-05-29 15:54:46 +02:00
417205623a
cc3200: Fix incorrect type for the wake cause variable.
2015-05-29 15:54:16 +02:00
2f2c0a13fb
cc3200: Clean up WLAN API. Make WLAN.info() an attrtuple.
2015-05-29 15:48:41 +02:00
622f241317
cc3200: Rename pyb.reset() to pyb.hard_reset() and add pyb.unique_id().
2015-05-29 10:22:20 +02:00
78744c4f7a
cc3200: Remove WIPY-SD variant, and make the WiPy the default board.
2015-05-28 13:22:26 +02:00
2abb58d758
cc3200: Rename Pin.get_config() to Pin.info().
2015-05-28 13:10:46 +02:00
1580e331ef
cc3200: Make small changes in WLAN to improve the API.
2015-05-28 13:10:44 +02:00
c754d8011d
cc3200: Simplify SPI polarity and phase checks in constructor.
2015-05-27 09:45:32 +02:00
95104b0fbd
cc3200: Add note about old revisions of the CC3200-LAUNCHXL.
2015-05-27 09:45:30 +02:00
d07de2d307
cc3200: Move the STDIO UART pin configuration to mpconfigboard.h.
2015-05-27 09:45:29 +02:00
9414f92fa9
cc3200: Fix I2C and SPI module references.
2015-05-27 09:45:27 +02:00
8096be089e
cc3200: Add make_new method to the WDT.
2015-05-27 09:45:25 +02:00
fca3493442
cc3200: Add make_new method to the RTC, like in stmhal.
2015-05-27 09:45:24 +02:00
5a0c5f8fea
cc3200: Use the WDT stall feature in debug mode only.
2015-05-27 09:45:22 +02:00
ec1f0e7551
cc3200: Use MCU reset instead of SOC reset.
...
I have seen the CC3200 hanging a couple of times, and according to TI
itself the SOC reset is not reliable, which explains my observations.
2015-05-27 09:45:21 +02:00
fabe79f7af
cc3200: Clean up exception handling.
2015-05-26 12:29:20 +02:00
124aa000af
cc3200: Use polarity and phase instead of submode in the SPI construct.
2015-05-26 11:30:48 +02:00
danicampora
Damien George
Paul Sokolovsky