23a568240d
esp8266: Use mp_raise_OSError helper function.
2016-10-07 14:00:51 +11:00
a2bfcbe029
stmhal: Use mp_raise_OSError helper function.
2016-10-07 13:58:25 +11:00
e3d29996b3
driver/dht: Use mp_raise_OSError helper function.
2016-10-07 13:53:34 +11:00
75af908c0e
extmod: Use mp_raise_OSError helper function.
2016-10-07 13:52:14 +11:00
06d0083468
extmod/modlwip: Use mp_raise_OSError helper function.
...
Reduces esp8266 code size by about 230 bytes.
2016-10-07 13:47:57 +11:00
620c4c32bf
extmod/vfs_fat: Use mp_raise_OSError helper function.
2016-10-07 13:44:55 +11:00
3a0a771730
py: Add mp_raise_OSError(errno) helper function.
...
This is an often used code pattern, and its use reduces code size of the
core by about 100 bytes.
2016-10-07 13:31:59 +11:00
0363e1d7b5
esp8266: Add FLASH_MODE,FLASH_SIZE options for make deploy target.
...
Added options to make deploy so it can be used for ESP8266 boards with
other flash configurations. For example NodeMCU DEVKIT V1.0 can now use:
$ make FLASH_MODE=dio FLASH_SIZE=32m deploy
2016-10-07 13:18:48 +11:00
00c1fc6d77
docs/uos: Add uos.statvfs() documentation.
2016-10-07 13:16:54 +11:00
82af4d6749
tests: Improve coverage of struct with test for non-compliant behaviour.
2016-10-07 12:57:25 +11:00
dffa383b06
py/modstruct: Remove unreachable code, and add comment about CPy diff.
...
The deleted code is unreachable because calcsize_items guarantees that
num_items corresponds to how many items there are in fmt to unpack.
2016-10-07 12:54:14 +11:00
9fdba0e09c
tests/extmod/uzlib: Test adaptive huffman tree for tinflate coverage.
2016-10-07 01:02:11 +11:00
056da75a8a
esp8266: Make PY_UHASHLIB_SHA1 config depend on PY_USSL and SSL_AXTLS.
...
SHA1 can only be supported if ussl module is compiled in, and it uses
axtls.
2016-10-06 12:28:28 +11:00
0bb3c7d3b7
stmhal: Enable machine.time_pulse_us() function.
2016-10-06 12:12:20 +11:00
c08f50bcf7
stmhal: Disable network and usocket for ESPRUINO_PICO
2016-10-06 11:47:45 +11:00
7f19b1c3eb
tests: Fix expected output of verbose cmdline test
...
The output might contain more than one line ending in 5b so properly skip
everything until the next known point.
This fixes test failures in appveyor debug builds.
2016-10-05 12:58:50 +02:00
b89ac9db78
stmhal/moduos: Implement total-number-of-blocks field in statvfs.
2016-10-05 15:52:36 +11:00
b1537a5752
stmhal/mphalport: Change pin obj type to const pointer, to avoid casts.
2016-10-05 15:51:40 +11:00
bcf60b43ee
esp8266/modpybrtc.c: Implement machine.RTC.alarm_left()
...
Implementation of machine.RTC.alarm_left(), like described in the
documentation.
2016-10-05 12:20:30 +11:00
7a9c183c20
stmhal: Fix ESPRUINO_PICO by adding ld scripts with correct flash size.
2016-10-05 11:42:50 +11:00
cecf6bee97
tools: Upgrade upip to 1.0.
...
Fully self-hosted release (without fallbacks), and uses stream gzip
decompression (step towards support for limited-heap baremetal systems).
2016-10-05 00:34:09 +03:00
161e9f4115
esp8266/main: Put /lib before / in sys.path.
...
upip will use first non-empty component in sys.path as an install path
(if MICROPYPATH envvar is not set, like it will be for baremetal targets).
2016-10-05 00:02:51 +03:00
52784bf595
esp8266/modmachine: idle(): Return number of CPU cycles spent idling.
...
Useful to better understand esp8266 inner workings and compare behavior
in different cases.
2016-10-04 21:20:47 +03:00
addd1d3db1
tests/extmod/btree1: Checks for put, seq, string print and unsupported binary op.
2016-10-05 00:17:22 +11:00
99d62c4def
stmhal/usb: Use real packet size (not maximum) in HID receive.
2016-10-04 15:39:31 +11:00
8f3cf6e6a8
stmhal/usb: Use correct ClassData structure for HID receive.
2016-10-04 15:38:32 +11:00
eb239b8398
stmhal/usb: Add support to receive USB HID messages from host.
2016-10-04 15:38:01 +11:00
03de5a13cf
stmhal/usbdev: Add OUT endpoint to HID interface.
2016-10-04 15:20:11 +11:00
cd20027f56
tests/run-tests: Disable cmdline/cmd_showbc test on Windows.
...
Disabled until a proper fix is found.
2016-10-04 14:42:51 +11:00
1f433c719b
stmhal: Fix linker map for STM32L476 chips.
...
In particular, this makes the L4 .isr_vector section 16K in size so it's
the same as the F4/F7 MCUs. The patch also moves the L4 filesystem to
the end of flash, which allows for 512K filesystem on the 1Mb devices
like the STM32L476DISC.
2016-10-04 14:31:19 +11:00
bd925b59c3
stmhal/spi: Enable use of fast software SPI.
2016-10-04 13:51:30 +11:00
b0eb0d6153
extmod/machine_spi: Add optional support for fast software SPI.
...
If a port defines MICROPY_PY_MACHINE_SPI_MIN_DELAY then it can use a
faster software SPI loop that does not make calls to the delay_us
function.
2016-10-04 13:46:40 +11:00
b932b2dd1f
extmod/machine_spi: Use delay_half, not baudrate, for internal timing.
...
The delay_half parameter must be specified by the port to set up the
timing of the software SPI. This allows the port to adjust the timing
value to better suit its timing characteristics, as well as provide a
more accurate printing of the baudrate.
2016-10-04 13:43:02 +11:00
9f1e395c16
stmhal/spi: Use software SPI if no periph id given, even if pins given.
...
It's simpler to just default to always using software SPI if no specific
peripheral id/name is given. To use hardware SPI users must specify a
hardware peripheral id as the first parameter to the SPI constructor.
2016-10-04 13:38:11 +11:00
bd87375202
esp8266/moduos: Move stat/statvfs funcs to sit within #if VFS guard.
2016-10-03 21:48:32 +11:00
5deedd6685
stmhal/mphalport: Fix mp_hal_pin_write to use correct pin_mask.
2016-10-03 18:06:58 +11:00
d4a5ca5056
stmhal/spi: Make machine.SPI class conform to correct API.
...
Includes both software and hardware SPI implementations.
2016-10-03 17:12:43 +11:00
077dbf4a86
stmhal/mphalport: Implement mp_hal_pin_{input,output,write}.
2016-10-03 16:44:34 +11:00
d434ce3fca
extmod/machine_spi: Factor out software SPI code from esp8266 to extmod.
2016-10-03 16:43:44 +11:00
a22a67661a
stmhal/spi: Simplify spi_transfer function to take only one buf len arg.
2016-10-03 12:47:56 +11:00
5bb28c7f10
extmod/machine_spi: Simplify SPI xfer function to only take one buf len.
...
There is no need to take src_len and dest_len arguments. The case of
reading-only with a single output byte (originally src_len=1, dest_len>1)
is now handled by using the output buffer as the input buffer, and using
memset to fill the output byte into this buffer. This simplifies the
implementations of the spi_transfer protocol function.
2016-10-03 12:39:31 +11:00
a0d97fe408
cc3200: Add ssl_version argument to ssl.wrap_socket().
...
This resolves issue #2343 .
2016-10-01 21:35:09 +02:00
8de270b4fc
py/objbool: Make a slight simplification of bool constructor.
...
Reduces code size for some archs.
2016-09-30 17:02:07 +10:00
eca1408f16
py/objbool: Defer bool's unary op implementation to small int.
...
Similar to how binary op already works. Common unary operations already
have fast paths for bool so there's no need to have explicit handling of
ops in bool_unary_op, especially since they have the same behaviour as
integers.
2016-09-30 17:02:06 +10:00
3be4f886ce
py/argcheck: Simplify if-chain so that the last one is the default.
2016-09-30 16:45:43 +10:00
9f72a14920
tests/basics: Add test for printing OSError when errno is unknown.
2016-09-30 16:45:10 +10:00
b04d4a5b13
lib/cmsis: upgrade CMSIS-CORE to V4.30
2016-09-30 16:19:03 +10:00
fa6f774b2c
lib/cmsis: remove CMSIS-DSP headers, they are unused
2016-09-30 16:19:03 +10:00
6aea34ad89
lib/cmsis: move CMSIS headers to lib/
...
Files in lib/cmsis are generic for all Cortex-M MCU's
files left in stmhal/cmsis are all STM32 specific.
2016-09-30 16:19:03 +10:00
17b4509564
tests/basics: Add test constructing a set from a non-trivial expression.
2016-09-30 15:00:15 +10:00
Damien George
dmanso
Alex March
Dave Hylands
stijn
puuu
Paul Sokolovsky
Pavol Rusnak
Philip Potter
daniel
Krzysztof Blazewicz