Commit Graph

587 Commits

Author SHA1 Message Date
Glenn Ruben Bakke 4a323f8b80 nrf/nrfx_config: Move back nrf52832 to use non-EasyDMA SPI
As EasyDMA variant of SPI(M) might clock out an additional byte
in single byte transactions this patch moves the nrf52832 to
use SPI and not SPIM to get more stable data transactions.

Ref: nrf52832 rev2 errata v1.1, suggested workaround is:
"Use the SPI module (deprecated but still available) or
use the following workaround with SPIM ..."

Current nrfx SPIM driver does not contain this workaround,
and in the meanwhile moving back to SPI fixes the issue.

Also, tabbing the nrfx_config.h a bit to make it more readable.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 5925004da3 nrf/modules/machine/spi: Move enable-guard to prevent wrong includes
This patch moves the check of SPI configuration before
including any SPI header files. As targets might disable SPI
support, current code ends up in including SPIM if not SPI
is configured. Hence, this is why the check whether the module is
enabled should be done before including headers.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 774638e2a9 nrf/boards/feather52: Move phony targets to main Makefile
dfu-gen .PHONY target is run unconditionally as first build
target when included, and might fail if the hex file is not
yet generated.

To prevent this, the dfu-gen and dfu-flash targets are moved
to the main Makefile and only exposed if feather52 is the
defined BOARD.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke d3311681a9 nrf: Enable micro:bit FS by default
Update configuration define from
MICROPY_HW_HAS_BUILTIN_FLASH to MICROPY_MBFS.

MICROPY_MBFS will enable the builtin flash as
part of enabling the micro:bit FS.
2018-07-18 17:12:26 +10:00
Ayke van Laethem a4615672d4 nrf/modules/uos/microbitfs: Remove unused uos_mbfs_mount.
It throws an error in GCC 6.3.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 635064c432 nrf/modules/uos/microbitfs: Fix errno defines.
Probably broken after the recent Clang fixes to errno.h.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 1aa9ff9141 nrf/mphalport: Remove divided assembly syntax. 2018-07-18 17:12:26 +10:00
Ayke van Laethem fb17105183 nrf: Remove useless #include <errno.h>. 2018-07-18 17:12:26 +10:00
Ayke van Laethem 17769452d4 nrf/modules/machine/adc: Don't compare -1 to an unsigned number.
Clang warns about this.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 4111206bd5 nrf/Makefile: Refine dead-code elimination parameters.
Clang warns about useless -Wl,--gc-sections passed in CFLAGS.
2018-07-18 17:12:26 +10:00
Ayke van Laethem ab72b5b69c nrf/Makefile: Use C11 instead of Gnu99.
Some constructs require C11 which GCC silently allows.
2018-07-18 17:12:26 +10:00
Ayke van Laethem a6ae950b75 nrf/Makefile: Remove -fstack-usage.
-fstack-usage is not supported by Clang and old GCC versions.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 5fdebe62d3 nrf/Makefile: use "standard" GCC -fshort-enums instead of --short-enums.
Clang understands only -fshort-enums, not --short-enums. As
--short-enums isn't even mentioned in the gcc man page, I think this
alias exists more for backwards compatibility.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 03da4e33fb nrf/bluetooth: Fixes for s132 v5 BLE stack
Removing unused nrf52832_512k_64k_s132_5.0.0.ld.

Adding new linker script s132_5.0.0 following new
linker script scheme.

Updating ble_drv.c to handle de-increment of
outstanding tx packets on hvx for s132 v5.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 58ec23fdf7 nrf/modules/machine/adc: Fix to make adc.c compile for nrf51 targets 2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 24258cf0b9 nrf: Return immediatly from mp_hal_delay_us if 0us is given
After nrfx 1.0.0 a new macro was introduced to do a common
hardware timeout. The macro function triggers a counter of
retries or a timeout in us. However, in many cases, like in
nrfx_adc.c the timeout value is set to 0, leading to a infinite
loop in mp_hal_delay_us. This patch prevents this from happening.

Path of error:
nrfx_adc.c -> NRFX_WAIT_FOR -> NRFX_DELAY_US -> mp_hal_delay_us.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 63c748bfcc nrf/spi: Allow for external use of new and transfer function.
This patch also opens up for all arguments to be set as positional
arguments such that an external user of the make_new function can set
provide all parameters as positional arguments.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 434bd568fe nrf/adc: Allow for external use of new and value read function. 2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 3209a13bf5 nrf/modules: Align method to resolve pin object
machine/i2c already uses mp_hal_get_pin_obj which
points to pin_find function in order to locate correct
pin object to use.

The pin_find function was recently updated to also
being able to locate pins based on an integer value,
such that pin number can be used as argument to object
constructors.

This patch modfies and uniforms pin object lookup for
SPI, music and pwm.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 0f7da42c75 nrf/modules/random: Rename port config for RNG
Renaming config for enabling random module with hw
random number generator from MICROPY_PY_HW_RNG to
MICROPY_PY_RANDOM_HW_RNG to indicate which module it
is configuring.

Also, disabling the config by default in mpconfigport.h.

Adding the enable of RNG in all board configs.

Moving ifdef in modrandom, which test for the config being
set, earlier in the code. This is to prevent un-necessary
includes if not needed.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke f4382a2885 nrf/boards/wt51822_s4at: Fixes after nrfx and Pin IRQ introduction 2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 72aacef02e nrf/boards: Remove unused defines from board config headers 2018-07-18 17:12:26 +10:00
Ayke van Laethem 65f8d9a643 nrf/gccollect: Use the SP register instead of MSP.
Using the current stack pointer directly saves 8 bytes of code.
We need the *current* register anyway for GC (which is always MSP).
2018-07-18 17:12:26 +10:00
Ayke van Laethem 013c23712c nrf/drivers/bluetooth/ble_drv: Increase max transfers in progress.
Increase the maximum number of queued notifications from 1 to 6. This
massively speeds up the NUS console - especially when printing large
amounts of text. The reason is that multiple transfers can be done in a
single connection event, in ideal cases 6 at a time.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 67fd67f549 nrf/modules/machine/spi: SPIM (EasyDMA) backend for nrf52x
This patch moves all nrf52 targets to use SPIM backend
for SPI which features EasyDMA. The main benefit of doing
this is to utilize the SPIM3 on nrf52840 which is
EasyDMA only peripheral.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 6e8a605500 nrf/modules/machine/pin: Add support for IRQ on Pin's
This patch ads irq method to the pin object. Handlers
registered in the irq method will be kept as part of the
ROOT_POINTERS.

In order to resolve which pin object is the root of the
IRQ, the pin_find has been extended to also be able to
search up Pin objects based on mp_int_t pin number.
This also implies that the Pin.new API is now also supporting
creation of Pin objects based on the integer value of the
pin instead of old style mandating string name of the Pin.

All boards have been updated to use real pin number from
0-48 instead of pin_Pxx for UART/SPI and music module pins.

UART/SPI/modmusic has also been updated to use pin number
provided directly or look up the Pin object based on the
integer value of the pin (modmusic).

Pin generation has been updated to create a list of pins, where
the board/cpu dicts are now refering to an index in this list
instead of having one const declaration for each pin. This new
const table makes it possible to iterate through all pins generated
in order to locate the correct Pin object.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 864f671744 nrf: Remove port member from Pin object
In order to be able to support GPIO1 port on nrf52840
the port has been removed from the Pin object.

All pins on port1 will now be incrementally on top of
the pin numbers for gpio0. Hence, Pin 1.00 will become
P32, and Pin 1.15 will become P47.

The modification is done to address the new gpio HAL
interface in nrfx, which resolves the port to be
configured base on a multiple of 32.

The patch also affects the existing devices which does
not have a second GPIO port in the way that the
port indication A and B is removed from Pin generation.
This means that the port which was earlier addressed
as PA0 is now P0, and PA31 is P31.

Also, this patch removes the gpio member which earlier
pointed to the perihperal GPIO base address. This is not
needed anymore, hence removed.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 2de65dda22 nrf: Make linker scripts more modular.
With all the variation in chips and boards it's tedious to copy and
redefine linker scripts for every option. Making linker scripts more
modular also opens up more possibilities, like enabling/disabling the
flash file system from the Makefile - or even defining it's size from a
Makefile argument (FS_SIZE=12 for a 12kB filesystem if tight on space).
2018-07-18 17:12:26 +10:00
Ayke van Laethem 375bc31f4b nrf: Enable -g flag by default.
This does not affect binary output, but makes debugging a whole lot
easier.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 1949719e1d nrf/Makefile: Fix .PHONY target.
It must be in uppercase.
2018-07-18 17:12:26 +10:00
Ayke van Laethem 57ca1ecf01 nrf: Fix NUS console when using boot.py or main.py. 2018-07-18 17:12:26 +10:00
glennrub 002f7d1ad7 nrf: Replace custom-HAL with nrfx-HAL
Summarized this squashed PR replaces the hal/ folder in the port. This has been replaced the official
HAL layer from Nordic Semiconductor; https://github.com/NordicSemiconductor/nrfx.

A Git submodule has been added under lib/nrfx, for the nrfx dependency.

The drivers / modules has been updated to use this new HAL layer; nrfx at v1.0.0.

Also, header files and system files for nrf51/nrf52x chip variants has been deleted from the device/ folder, only keeping back the startup files written in C. All other files are now fetched from nrfx.

3 new header files in the ports/nrf/ folder has been added to configure nrfx (nrfx_config.h), logging (nrfx_log.h) and glue nrfx together with the drivers and modules from micropython (nrfx_glue.h).

The PR has been a joint effort from @aykevl (Ayke van Laethem) and @glennrub.

For reference, the commit log will be kept to get an overview of the changes done:

* ports/nrf: Initial commit for moving hal to Nordic Semiconductor BSD-3 licensed nrfx-hal.

* ports/nrf: Adding nrfx, Nordic Semiconductor BSD-3 hal layer, as git submodule checked out at lib/nrfx.

* ports/nrf/modules/machine/uart: Fixing bug which set hwfc to parity excluded, always resulting in no flow control, hence corrupted output. Also adding an extra loop on uart_tx_char to prevent any tx when any ongoing tx is in progress.

* ports/nrf/i2c: Moving I2C over to nrfx driver.

* ports/nrf/modules/machine/i2c: Alignment. Renaming print function param 'o' to 'self_in'

* ports/nrf/spi: Updating SPI machine module to use nrfx drivers.

* ports/nrf: Renaming modules/machine/rtc.c/.h to rtcounter.c/.h to not confuse the peripheral with Real-Time Clock:

* ports/nrf: Updating various files after renaming machine module RTC to RTCounter.

* ports/nrf: Renaming RTC to RTCounter in modmachine globals dict table. Also updating object type name to reflect new module name.

* ports/nrf: Fixing leftovers after renaming rtc to rtcounter.

* ports/nrf: Early untested adoption of nrfx_rtc in RTCounter. Untested.

* nrf/modules/machine/i2c: Improve keyword argument handling

* ports/nrf/modules/temp: Updating Temp machine module to use nrfx defined hal nrf_temp.h. Moving logic of BLE stack awareness to machine module.

* ports/nrf/boards/pca10040: Enable machine Temp module.

* nrf/modules/machine/rtcounter: Remove magic constants.

* ports/nrf: Adding base support for nrfx module logging. Adding option to disable logging of UART as it might log its own setup over UART while the peripheral is not yet set up. Logging of UART could make sense if other transport of log is used.

* ports/nrf: updating nrfx_log.h with more correct parenthisis on macro grouping.

* ports/nrf: Updating nrfx logging with configuration to disable logging of UART module. The pattern can be used to turn off other modules as well. However, for now UART is the only module locking itself by logging before the peripheral is configured. Logging is turned off by default, can be enabled in nrfx_config.h by setting NRFX_LOG_ENABLED=1.

* ports/nrf/modules/random: Updating modrandom to use nrfx hal for rng. Not using nrfx-driver for this peripheral as its blocking mode would do the trick on RNG. Moving softdevice aware code from legacy hal to modrandom.c.

* nrf: Enable Peripheral Resource Sharing.

This enables TWI and SPI to be enabled at the same time.

* nrf/Makefile: Define MCU sub variant (e.g. NRF51822/NRF51422)

* nrf: Port TIMER peripheral to nrfx HAL.

* nrf/modules/machine/uart: Optimize UART module

For a nRF51, this results in a size reduction of:
.text: -68 bytes
.data: -56 bytes

* nrf/modules/machine/uart: Don't use magic index numbers.

* nrf/modules/machine/uart: Fix off-by-one error.

For nrf51:
.text: -40 bytes

* nrf/modules/machine/rtcounter: Update for nrfx HAL.

* nrf/modules/machine/i2c: Reduce RAM consumption.

Reductions for the nrf51:
flash: -108 bytes
RAM:   -72 bytes

* nrf/mpconfigport: Avoid unnecessary root pointers.

This saves 92 bytes of RAM.

* nrf: Support SoftDevice with nrfx HAL.

* nrf: Add NVMC peripheral (microbitfs) support.

There is no support yet for a SoftDevice.

It also fixes a potentially serious bug in start_index generation.

* nrf/modules/machine/spi: Optimize SPI peripheral.

nrf51:
text: -340 bytes
data: -72  bytes

nrf52:
text: -352 bytes
data: -108 bytes

* nrf/modules/random: Forgot to commit header file.

* nrf: Make nrfx_config.h universal for all boards.

* nrf: Use SoftDevice API for flash access when built for SD

* nrf/drivers/bluetooth: Remove legacy HAL driver includes.

These were not used anymore so can be removed.

* ports/nrf/microbit: Port microbit targets to nrfx HAL

Initial port of microbit modules to use nrfx HAL layer.
Tested display/image and modmusic on micro:bit to verify that
softpwm and ticker for nrf51 is working as expected.

Changing IRQ priority on timer to priority 2, as 1 might collide if
used side by side of SD110 BLE stack.

The patch reserves Timer1 peripheral compile time. This is not ideal
and should be resolved in seperate task.

* nrf/boards/microbit: Remove custom nrfx_config.h from microbit target, adding disablement of timer1 if softpwm is enabled.

* nrf/adc: Update ADC module to use nrfx

* nrf/modules/machine/pwm: Updating machine PWM module to use nrfx HAL driver.

examples/nrf52_pwm.py and examples/nrf52_servo.py tested on pca10040.

* nrf: Removing hal folder and boards nrf5x_hal_conf.h headers.

* nrf/nrfx_glue: Adding direct NVIC access for S110 BLE stack

If SoftDevice s110 has not yet been initialized, the IRQ will not be forwarded to
the application using the sd_nvic* function calls. Hence, direct access to cmsi
nvic functions are used instead if SoftDevice is not enabled.

* nrf/drivers/ticker: Setting IRQ priority 3 on Timer1

SoftDevice fails to initilize if Timer1 has been configured to priority
level 2 before enabling the SD. The timer is set to priority 1, higher than BLE
stack in order to provide better quality of music rendering when used with the
music module. This might be too high, time will show.

* nrf/examples: Updating ubluepy_temp after moving RTCounter to nrfx.

* nrf: delete duplicate files from device folder which can be located in nrfx/mdk.

* nrf/Makefile: Fetch system files from nrfx.

Testing on each device sub-variant to figure out which system file to
use. Reason for this is that nrf52.c is actually defining nrf52832.

Removing NRF_DEFINES parameter setting the device in use into the
same sub-variant test, as NRF52 is unique to nrf52832 when using nrfx.
Without this exclusion of -DNRF52 in compilation for nrf52840, the
device will be interpreted as a nrf52, hence nrf52832.

Also, changing name on variable SRC_NRF_HAL to SRC_NRFX_HAL to
explicitly tell the origin of the file.

* nrf: Updating device #ifdefs to be more open to non-nrf51 targets.

* nrf/modules/machine/uart: Removing second instance of UART for nrf52840 as it only has one non-DMA variant.

* nrf/device: Removing system files as these are now used from nrfx/mdk

* nrf: Moving startup files in device one level up as there is no need for deep hierarchy.

* nrf: Use NRF52_SERIES defined in nrfx/mdk/nrf.h as define value when testing for both nrf52(832) and nrf52840 variants.

* nrf/modules/machine/uart: Enable UART RX by default

Enable rx by default after intiialization of the peripheral.
Else, the nrfx driver will re-enable rx for each byte read
on uart REPL, clearing the EVENT_RXDRDY before second byte,
which again will make second byte get lost and read will get stuck.

This happens if the bytes are transmitted nrf(51) while still
processing the previous byte. Not seen on nrf52, but should
also become an issue at higher speeds.

This patch sets rx to always be enabled. Hence, not clearing the event
between read bytes, and it will be able to detect next byte recieved
upon finishing the first.

* nrf/modules/machine/timer: Fixing defines excluding Timer1 if ticker/softpwm is used.

* nrf: Switching import form mpconfigboard.h to mpconfigport.h in nrfx_config.h as mpconfigboard.h might define default values for defines not set by board specific header.

* nrf/modules/machine/i2c: nrfx integration fixes

Increasing speed to 400K.

Returning Address NACK's as MP error code; MP_ENODEV.

Returning MP_ETIMEOUT on all other error codes from TWI nrfx driver
except the ANACK.

Enabling and disabling the TWI peripheral before and after each transaction.

* nrf/examples: Updating ssd1306_mod.py to split framebuffer transfer into multiple chunks

* nrf/modules/machine/i2c: Return MP_EIO error if Data NACK occurs.

* nrf: Addressing review comments.

* nrf: Updating git submodule and users to nrfx v1.0.0.

* nrf/modules/machine/adc: Update adc module to follow v1.0.0 nrfx API.

* nrf/modules/machine/spi: Implement init and deinit functions

Extending SPI objects with a config member such that
configuration can be kept between new() and init().

Moving initialization done in new() to common init
function shared between the module functions.

If SPI is already configured, the SPI peripheral will
be uninitialized before initalized again.

Adding logic to handle initialization of polarity and
phase. As well, updating default speed to 1M from 500K.

* nrf/modules/machine: Removing unused nrfx includes in machine module header files
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke 62931398d7 nrf/boards/microbit/modules: Initialize variable in microbit_sleep.
When compiling for microbit with LTO=0, a compiler error occurs due to
'ms' variable in the microbit_sleep function has not been initialized.

This patch initialize the variable to 0.
2018-07-18 17:12:25 +10:00
Ayke van Laethem 3cdecf90e6 nrf: Make LTO configurable via Makefile flag.
LTO messes up debuggability and may cause some other issues.
Additionally, it does not always result in reduced code size.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke c486127378 nrf: Improve include of boardmodules.mk
Removing shell commands for checking if boardmodules.mk exists
under boards/<BOARD>/modules folder before including it.

This patch does the equivalent to previous test without using
shell commands. Hence, including the .mk if it exists.

Reference:
https://stackoverflow.com/questions/8346118/check-if-a-makefile-exists-before-including-it
2018-07-18 17:12:25 +10:00
Ayke van Laethem 4231d4311f nrf: Fix stack size in ld script and enable MICROPY_STACK_CHECK.
The nrf51x22_256k_16k_s110_8.0.0.ld had a stack size of only 1kB, which
is way too low. Additionally, the indicated _minimum_stack_size (set at
2kB for that chip) isn't respected.

This commit sets the heap end based on the stack size (heap end = RAM
end - stack size) making it much easier to configure.

Additionally, the stack/heap size of nrf52 chips has been set to a more
sane value of 8kB.
2018-07-18 17:12:25 +10:00
Ayke van Laethem 987381dfa0 nrf: Make machine.UART optional.
Leave it enabled by default on all targets.

This is only possible when using UART-over-BLE (NUS) instead of the
default hardware peripheral. The flash area saved is quite substantial
(about 2.2KB) so this is useful for custom builds that do not need UART.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke f679ee2092 nrf/drivers/ble_drv: Fixing sd_ble_enable bug for SD s132 v.2.0.1
Feather52 target which is using SD s132 v.2.0.1 cannot compile
due to variable containing RAM start address is not used.

This patch enables the correct sd_ble_enable variant for this SD.
2018-07-18 17:12:25 +10:00
Ayke van Laethem f907139fab nrf/boards/common.ld: Avoid overflowing the .text region.
Similar commit to this one:
6e56e6269f

When .text + .data oveflow available flash, the linker may not show an
error. This change makes sure .data is included in the size calculation.
2018-07-18 17:12:25 +10:00
Ayke van Laethem 4c011e66b4 nrf/modules/machine/pin: Disable pin debug by default.
Saves for the nrf51:
flash: 336 bytes
RAM:     4 bytes
2018-07-18 17:12:25 +10:00
Ayke van Laethem 1b988f1e7d nrf/mpconfigport: Reduce GC stack size for nrf51.
This frees 128 bytes of .bss RAM on the nRF51, at the cost of possibly
more expensive GC cycles. Leave it as-is on the nRF52 as that chip has a
lot more RAM.

This is also done in the micro:bit:
a7544718a7/inc/microbit/mpconfigport.h (L6)
2018-07-18 17:12:25 +10:00
kaasasolut c1cd7e5155 nrf: Only search for frozen files if FROZEN_MPY_DIR is set 2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke 725267df09 nrf: Change PYB prefix to MPY 2018-07-18 17:12:25 +10:00
glennrub f8f14bf0c7 nrf: Add support for s132 v5.0.0 bluetooth stack (#139)
* ports/nrf/boards: Adding linker script for nrf52832 using BLE stack s132 v.5.0.0.

* ports/nrf/drivers/bluetooth: Updating makefile to add BLE_API_VERSION=4 if s132 v5.0.0 is used.

* ports/nrf/drivers/bluetooth: Updating BLE stack download script to also download S132 v5.0.0.

* ports/nrf/drivers/bluetooth: Updating ble_drv.c to handle BLE_API_VERSION=4 (s132 v5.0.0).

* ports/nrf/boards: Updating linker script for nrf52832 with s132 v.5.0.0 bluetooth stack.

* ports/nrf/drivers/bluetooth: Removing commented out code in ble_drv.c

* ports/nrf/drivers/bluetooth: Updating define of GATT_MTU_SIZE_DEFAULT for SD132v5 to be defined using the new name defined in the SD headers in a more generic way.

* ports/nrf/drivers/bluetooth: Cleaning up use of BLE_API_VERSION in the ble_drv.c. Also considering s140v6 API, so not all has been changed to >= if API version 3 and 4 in combo is used. New s140v6 will differ on these, and add a new API not compatible with the API for 3 and 4.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke 95bd20522a nrf/drivers/bluetooth: Reset evt_len to size of static buffer each iter.
For each iteration of polling BLE events from the Bluetooth LE stack.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke c8fd71612b nrf/boards/microbit: Enable music, display, image, microbit module.
Enabled by default on microbit targets, with or without BLE stack.  Also
enable softpwm to make display and music module compile.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke f5ed40116f nrf: Add if-def around inclusion of nrf_sdm.h in main.
Not all targets are using bluetooth le.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke 6062d46170 nrf: Change board module header from board_modules.h to boardmodules.h.
Applicable for targets with board specific modules.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke 0d7976deb2 nrf/boards/microbit: Update docs on top level tick low pri callback. 2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke 1128aacb69 nrf/boards/microbit: Add temperature back to microbit module.
Increases size by 68 bytes.  Should be considered to be removed as temp
module is already providing this functionality.
2018-07-18 17:12:25 +10:00