Commit Graph

2846 Commits

Author SHA1 Message Date
Damien George c7e8c6f7de py/gc: Execute finaliser code in a protected environment.
If a finaliser raises an exception then it must not propagate through the
GC sweep function.  This patch protects against such a thing by running
finaliser code via the mp_call_function_1_protected call.

This patch also adds scheduler lock/unlock calls around the finaliser
execution to further protect against any possible reentrancy issues: the
memory manager is already locked when doing a collection, but we also don't
want to allow any scheduled code to run, KeyboardInterrupts to interupt the
code, nor threads to switch.
2017-04-12 13:52:04 +10:00
Damien George 08242eed26 py/nlrsetjmp: Add check for failed NLR jump.
Also optimise the function so it only needs to call the MP_STATE_THREAD
macro once (following how other nlr code is written).
2017-04-12 13:50:31 +10:00
Damien George a73501b1d6 py/objfloat: Add implementation of high-quality float hashing.
Disabled by default.
2017-04-12 13:38:17 +10:00
Damien George 816413e4b2 py: Optimise types for common case where type has a single parent type.
The common cases for inheritance are 0 or 1 parent types, for both built-in
types (eg built-in exceptions) as well as user defined types.  So it makes
sense to optimise the case of 1 parent type by storing just the type and
not a tuple of 1 value (that value being the single parent type).

This patch makes such an optimisation.  Even though there is a bit more
code to handle the two cases (either a single type or a tuple with 2 or
more values) it helps reduce overall code size because it eliminates the
need to create a static tuple to hold single parents (eg for the built-in
exceptions).  It also helps reduce RAM usage for user defined types that
only derive from a single parent.

Changes in code size (in bytes) due to this patch:

    bare-arm:       -16
    minimal (x86): -176
    unix (x86-64): -320
    unix nanbox:   -384
    stmhal:         -64
    cc3200:         -32
    esp8266:       -108
2017-04-12 13:22:21 +10:00
Damien George fc710169b7 py/obj: Clean up and add comments describing mp_obj_type_t struct. 2017-04-12 13:20:26 +10:00
Damien George e31fbd9b41 py/objint: Use unsigned arithmetic when formatting an integer.
Otherwise the edge case of the most negative integer value will not convert
correctly.
2017-04-11 15:18:35 +10:00
Damien George f66df1efc8 py/objint: Extract small int value directly because type is known. 2017-04-11 15:16:09 +10:00
Damien George 79ce664952 py/runtime: When init'ing kbd intr exc, use tuple ptr instead of object. 2017-04-10 17:07:26 +10:00
Damien George ee86de1f1a py: Make sure that static emg-exc-buffer is aligned to size of mp_obj_t.
This buffer is used to allocate objects temporarily, and such objects
require that their underlying memory be correctly aligned for their data
type.  Aligning for mp_obj_t should be sufficient for emergency exceptions,
but in general the memory buffer should aligned to the maximum alignment of
the machine (eg on a 32-bit machine with mp_obj_t being 4 bytes, a double
may not be correctly aligned).

This patch fixes a bug for certain nan-boxing builds, where mp_obj_t is 8
bytes and must be aligned to 8 bytes (even though the machine is 32 bit).
2017-04-10 16:02:56 +10:00
Damien George 81d2ca2b12 py/objtuple: Add support for inplace add (same as normal add). 2017-04-05 12:38:02 +10:00
Damien George de9b53695d py: Raise a ValueError if range() step is zero.
Following CPython.  Otherwise one gets either an infinite loop (if code is
optimised by the uPy compiler) or possibly a divide-by-zero CPU exception.
2017-04-05 10:50:26 +10:00
Damien George fc245d1ca4 py/objint: Consolidate mp_obj_new_int_from_float to one implementation.
This reduces code duplication and allows to make mp_classify_fp_as_int
static, which reduces code size.
2017-04-04 16:45:49 +10:00
Damien George 19f2e47d59 py: Add very simple but correct hashing for float and complex numbers.
Hashing of float and complex numbers that are exact (real) integers should
return the same integer hash value as hashing the corresponding integer
value.  Eg hash(1), hash(1.0) and hash(1+0j) should all be the same (this
is how Python is specified: if x==y then hash(x)==hash(y)).

This patch implements the simplest way of doing float/complex hashing by
just converting the value to int and returning that value.
2017-04-04 11:57:21 +10:00
Paul Sokolovsky 9a973977bb py/objstr: Use MICROPY_FULL_CHECKS for range checking when constructing bytes.
Split this setting from MICROPY_CPYTHON_COMPAT. The idea is to be able to
keep MICROPY_CPYTHON_COMPAT disabled, but still pass more of regression
testsuite. In particular, this fixes last failing test in basics/ for
Zephyr port.
2017-04-02 21:20:07 +03:00
Damien George a5500a8aad py/obj.h: Make sequence grow more efficient and support overlapping.
The first memmove now copies less bytes in some cases (because len_adj <=
slice_len), and the memcpy is replaced with memmove to support the
possibility that dest and slice regions are overlapping.
2017-04-02 17:28:24 +10:00
Damien George 4c307bfba1 all: Move BYTES_PER_WORD definition from ports to py/mpconfig.h
It can still be overwritten by a port in mpconfigport.h but for almost
all cases one can use the provided default.
2017-04-01 11:39:38 +11:00
Damien George b6c7e4b143 all: Use full path name when including mp-readline/timeutils/netutils.
This follows the pattern of how all other headers are now included, and
makes it explicit where the header file comes from.  This patch also
removes -I options from Makefile's that specify the mp-readline/timeutils/
netutils directories, which are no longer needed.
2017-03-31 22:29:39 +11:00
Damien George 4b753515c7 py/objzip: Convert mp_uint_t to size_t. 2017-03-30 22:58:08 +11:00
Paul Sokolovsky 29dd92c82a zephyr/Makefile: Rework to use modern, official build integration.
Build happens in 3 stages:

1. Zephyr config header and make vars are generated from prj.conf.
2. libmicropython is built using them.
3. Zephyr is built and final link happens.
2017-03-30 00:08:27 +03:00
Damien George 6b34107537 py: Change mp_uint_t to size_t for mp_obj_str_get_data len arg. 2017-03-29 12:56:45 +11:00
Damien George 6213ad7f46 py: Convert mp_uint_t to size_t for tuple/list accessors.
This patch changes mp_uint_t to size_t for the len argument of the
following public facing C functions:

mp_obj_tuple_get
mp_obj_list_get
mp_obj_get_array

These functions take a pointer to the len argument (to be filled in by the
function) and callers of these functions should update their code so the
type of len is changed to size_t.  For ports that don't use nan-boxing
there should be no change in generate code because the size of the type
remains the same (word sized), and in a lot of cases there won't even be a
compiler warning if the type remains as mp_uint_t.

The reason for this change is to standardise on the use of size_t for
variables that count memory (or memory related) sizes/lengths.  It helps
builds that use nan-boxing.
2017-03-29 12:56:17 +11:00
Damien George f9b0e644e5 py/compile: Provide terse error message for invalid dict/set literals. 2017-03-29 12:44:27 +11:00
Damien George 18c059febf py: Shorten a couple of error messages. 2017-03-29 12:36:46 +11:00
Damien George f55a059e7a py/compile: Simplify syntax-error messages for illegal assignments.
With this patch all illegal assignments are reported as "can't assign to
expression".  Before the patch there were special cases for a literal on
the LHS, and for augmented assignments (eg +=), but it seems a waste of
bytes (and there are lots of bytes used in error messages) to spend on
distinguishing such errors which a user will rarely encounter.
2017-03-29 12:28:33 +11:00
Damien George 5010d1958f py/lexer: Simplify and reduce code size for operator tokenising.
By removing the 'E' code from the operator token encoding mini-language the
tokenising can be simplified.  The 'E' code was only used for the !=
operator which is now handled as a special case; the optimisations for the
general case more than make up for the addition of this single, special
case.  Furthermore, the . and ... operators can be handled in the same way
as != which reduces the code size a little further.

This simplification also removes a "goto".

Changes in code size for this patch are (measured in bytes):

bare-arm:       -48
minimal x86:    -64
unix x86-64:   -112
unix nanbox:    -64
stmhal:         -48
cc3200:         -48
esp8266:        -76
2017-03-29 10:56:52 +11:00
Damien George 94c41bb06f py: Use mp_raise_TypeError/mp_raise_ValueError helpers where possible.
Saves 168 bytes on bare-arm.
2017-03-28 22:37:26 +11:00
Damien George 54507f78ee py/objmap: Convert mp_uint_t to size_t. 2017-03-27 12:19:24 +11:00
Damien George 40c1272e55 py/compile: When compiling super(), handle closed-over self variable.
The self variable may be closed-over in the function, and in that case the
call to super() should load the contents of the closure cell using
LOAD_DEREF (before this patch it would just load the cell directly).
2017-03-27 11:27:08 +11:00
Damien George a0973b09ce py/vm: Fix VM opcode tracing to print correct stack pointer.
Also const_table is now moved to the code_state->fun_bc structure.
2017-03-27 10:52:04 +11:00
Damien George 3f810daeb3 py/obj: Change mp_uint_t to size_t for mp_obj_get_array_fixed_n len arg. 2017-03-26 19:20:06 +11:00
Paul Sokolovsky 99866a00a0 py/nlrx86: Better check for Zephyr (requires 1.7). 2017-03-26 00:33:23 +03:00
Damien George ab5689bc9d py/objarray: Use mp_obj_str_get_str instead of mp_obj_str_get_data. 2017-03-25 19:53:31 +11:00
Damien George 64a4f11b2d py: Remove MP_STATE_CTX, use MP_STATE_THREAD instead (it's an alias).
MP_STATE_CTX was recently aliased to MP_STATE_THREAD and can now be
removed.
2017-03-24 18:43:28 +11:00
Damien George 707f16b05c py: Use mp_locals/mp_globals accessor funcs instead of MP_STATE_CTX.
To improve maintainability of the code.
2017-03-24 18:41:11 +11:00
Damien George f4ee1ba9b4 py/objnamedtuple: Use size_t where appropriate, instead of mp_uint_t. 2017-03-24 17:25:25 +11:00
Damien George d1b93ced78 py/objtype: Use size_t where appropriate, instead of mp_uint_t or uint. 2017-03-24 16:58:13 +11:00
Damien George c236ebfea7 py/modbuiltins: Allow round() to return a big int if necessary.
Previous to this patch, if the result of the round function overflowed a
small int, or was inf or nan, then a garbage value was returned.  With
this patch the correct big-int is returned if necessary and exceptions are
raised for inf or nan.
2017-03-24 11:00:45 +11:00
Damien George 125eae1ba3 py/modbuiltins: For round() builtin use nearbyint instead of round.
The C nearbyint function has exactly the semantics that Python's round()
requires, whereas C's round() requires extra steps to handle rounding of
numbers half way between integers.  So using nearbyint reduces code size
and potentially eliminates any source of errors in the handling of half-way
numbers.

Also, bare-metal implementations of nearbyint can be more efficient than
round, so further code size is saved (and efficiency improved).

nearbyint is provided in the C99 standard so it should be available on all
supported platforms.
2017-03-24 11:00:45 +11:00
Damien George c073519ec8 py/objint: Handle special case of -0 when classifying fp as int.
Otherwise -0.0 is classified as a bigint, which for builds without bigints
will lead unexpectedly to an overflow.
2017-03-23 23:51:35 +11:00
Damien George febeff4af4 py/modmath: Allow trunc/ceil/floor to return a big int if necessary.
Previous to this patch, if the result of the trunc/ceil/floor functions
overflowed a small int, or was inf or nan, then a garbage value was
returned.  With this patch the correct big-int is returned if necessary,
and exceptions are raised for inf or nan.
2017-03-23 22:57:08 +11:00
Damien George f64a3e296e py/lexer: Remove obsolete comment, since lexer can now raise exceptions. 2017-03-23 16:40:24 +11:00
Damien George 60656eaea4 py: Define and use MP_OBJ_ITER_BUF_NSLOTS to get size of stack iter buf.
It improves readability of code and reduces the chance to make a mistake.

This patch also fixes a bug with nan-boxing builds by rounding up the
calculation of the new NSLOTS variable, giving the correct number of slots
(being 4) even if mp_obj_t is larger than the native machine size.
2017-03-23 16:36:08 +11:00
Damien George 507119f4d8 py/sequence: Convert mp_uint_t to size_t where appropriate. 2017-03-23 16:23:20 +11:00
Damien George c88cfe165b py: Use size_t as len argument and return type of mp_get_index.
These values are used to compute memory addresses and so size_t is the
more appropriate type to use.
2017-03-23 16:17:40 +11:00
Damien George 58f23def55 py/bc: Provide better error message for an unexpected keyword argument.
Now, passing a keyword argument that is not expected will correctly report
that fact.  If normal or detailed error messages are enabled then the name
of the unexpected argument will be reported.

This patch decreases the code size of bare-arm and stmhal by 12 bytes, and
cc3200 by 8 bytes.  Other ports (minimal, unix, esp8266) remain the same in
code size.  For terse error message configuration this is because the new
message is shorter than the old one.  For normal (and detailed) error
message configuration this is because the new error message already exists
in py/objnamedtuple.c so there's no extra space in ROM needed for the
string.
2017-03-22 13:40:27 +11:00
Damien George 1a5c8d1053 py/vm: Don't release the GIL if the scheduler is locked.
The scheduler being locked general means we are running a scheduled
function, and switching to another thread violates that, so don't switch in
such a case (even though we technically could).

And if we are running a scheduled function then we want to finish it ASAP,
so we shouldn't switch to another thread.

Furthermore, ports with threading enabled will lock the scheduler during a
hard IRQ, and this patch to the VM will make sure that threads are not
switched during a hard IRQ (which would crash the VM).
2017-03-20 18:42:27 +11:00
Damien George 6e74d24f30 py: Add micropython.schedule() function and associated runtime code. 2017-03-20 15:20:26 +11:00
stijn bf29fe2e13 py/objstr: Use better msg in bad implicit str/bytes conversion exception
Instead of always reporting some object cannot be implicitly be converted
to a 'str', even when it is a 'bytes' object, adjust the logic so that
when trying to convert str to bytes it is shown like that.
This will still report bad implicit conversion from e.g. 'int to bytes'
as 'int to str' but it will not result in the confusing
'can't convert 'str' object to str implicitly' anymore for calls like
b'somestring'.count('a').
2017-03-20 15:11:45 +11:00
Damien George 5640e6dacd py: Provide mp_decode_uint_value to help optimise stack usage.
This has a noticeable improvement on x86-64 and Thumb2 archs, where stack
usage is reduced by 2 machine words in the VM.
2017-03-17 16:50:19 +11:00
Damien George 71a3d6ec3b py: Reduce size of mp_code_state_t structure.
Instead of caching data that is constant (code_info, const_table and
n_state), store just a pointer to the underlying function object from which
this data can be derived.

This helps reduce stack usage for the case when the mp_code_state_t
structure is stored on the stack, as well as heap usage when it's stored
on the heap.

The downside is that the VM becomes a little more complex because it now
needs to derive the data from the underlying function object.  But this
doesn't impact the performance by much (if at all) because most of the
decoding of data is done outside the main opcode loop.  Measurements using
pystone show that little to no performance is lost.

This patch also fixes a nasty bug whereby the bytecode can be reclaimed by
the GC during execution.  With this patch there is always a pointer to the
function object held by the VM during execution, since it's stored in the
mp_code_state_t structure.
2017-03-17 16:39:13 +11:00