71ff0b549d
docs/esp8266/tutorial: Update intro to add Getting the firmware section.
...
Add a "Getting the firmware" section to better describe how to get hold of
the MicroPython firmware, especially if you have a 512kb module.
2016-12-30 14:27:02 +11:00
a5b3c7e7f9
docs/library/pyb.UART: Moved writechar doc to sit with other writes.
2016-12-15 09:59:45 +11:00
0caac94b98
docs/library/pyb.UART: Added clarification about timeouts.
2016-12-15 09:59:32 +11:00
46e59c52af
docs/library/pyb.Accel: Add hardware note about pins used by accel.
2016-12-02 17:39:13 +11:00
63a5df3cb4
docs/library/machine.I2C: Refine definitions of I2C methods.
2016-11-23 17:05:02 +11:00
64db4080ce
docs/library/index: Elaborate on u-modules.
...
Also, remove an "only" directive in u-modules description.
2016-11-16 01:18:19 +03:00
a392b3aa75
docs: Remove references to readall() and update stream read() docs.
2016-11-14 23:31:40 +11:00
c4e58eaa98
stmhal/i2c: Add option to I2C to enable/disable use of DMA transfers.
...
New keyword option in constructor and init() method is "dma=<bool>".
DMA is now disabled by default for I2C transfers because it currently does
not handle I2C bus errors very well (eg if slave device doesn't ACK or
NACK correctly during a transfer).
2016-11-11 17:36:19 +11:00
5a1d63fc14
docs: Bump version to 1.8.6.
2016-11-10 21:24:53 +11:00
3e5e4f95b2
docs/library/machine.Pin: Update Pin docs to align with new HW API.
2016-11-09 11:08:01 +11:00
5630778f0f
esp8266: Update docs for esptool 1.2.1/SDK 2.0 (--flash_size=detect).
2016-11-08 04:52:07 +03:00
933198c55f
docs/*/quickref.rst: Use new semantics of ticks_diff()
2016-11-08 02:01:05 +03:00
5c3d75c937
docs/esp8266: Update for new WebREPL setup procedure.
2016-11-06 10:02:33 +03:00
805f7ea2f2
docs/utime: Add docs for ticks_add(), improvements for other ticks_*().
2016-11-01 00:14:12 +03:00
8679d9e6a6
docs/utime: Remove only:: for ticks_diff().
...
It's mandatory function which should be present in every port. Even if
it's not, in the stdlib intro we waarn users that a particular port can
lack anything of described in the docs.
2016-11-01 00:03:40 +03:00
d60ad5cf53
docs/utime: Describe new semantics of ticks_diff() (signed ring arithmetics).
2016-10-31 00:17:56 +03:00
153665f159
docs/utime: Document ticks_cpu() in more detail.
...
Also, drop ::only directive.
2016-10-30 23:15:28 +03:00
7219a18d17
docs/library/index: Update TOCs so builtins sorted before modules.
2016-10-30 23:13:52 +03:00
c28f9df63a
docs/library/network: Typo fixes, consistent acronym capitalization.
2016-10-28 12:03:35 +03:00
b9a88683a4
docs/library/network: Reword intro paragraph.
2016-10-28 04:42:27 +03:00
67c91df7e8
docs/machine.SPI.rst: Fix typos and formatting, clarify.
...
Clarify the class implements master side of the protocol, also put adhoc
WiPy paramter after the generic, described in the current Hardware API
version.
2016-10-25 17:03:35 +03:00
f1b2b1b600
docs/library/builtins: Add docs for delattr and slice.
2016-10-25 11:02:47 +11:00
266e4acdc2
docs/library/machine.SPI: Remove spurious "of".
2016-10-24 14:41:21 +11:00
f12047f66d
docs/machine.SPI: Improve descriptions of xfer methods.
...
In particular remove the "*" because not all ports support keyword
arguments.
2016-10-18 10:14:26 +11:00
a0b2f48c2f
docs/machine.SPI: Bring up to date with Hardware API, make vendor-neutral.
2016-10-17 18:05:16 +03:00
c8d31585a0
docs: Bump version to 1.8.5.
2016-10-17 15:32:43 +11:00
9e1dec1818
docs/reference: Add constrained.rst doc.
...
It contains detailed information about writing scripts to run efficiently
on microcontrollers (and other constrained systems).
2016-10-11 15:27:20 +11:00
a181340ad8
docs/wipy: Correct deep sleep current figure.
2016-10-10 14:22:39 +02:00
00c1fc6d77
docs/uos: Add uos.statvfs() documentation.
2016-10-07 13:16:54 +11:00
eb239b8398
stmhal/usb: Add support to receive USB HID messages from host.
2016-10-04 15:38:01 +11:00
219245e10f
extmod/machine_i2c: Add support for the addrsize parameter in mem xfers.
...
The memory read/write I2C functions now take an optional keyword-only
parameter that specifies the number of bits in the memory address.
Only mem-addrs that are a multiple of 8-bits are supported (otherwise
the behaviour is undefined).
Due to the integer type used for the address, for values larger than 32
bits, only 32 bits of address will be sent, and the rest will be padded
with 0s. Right now no exception is raised when that happens. For values
smaller than 8, no address is sent. Also no exception then.
Tested with a VL6180 sensor, which has 16-bit register addresses.
Due to code refactoring, this patch reduces stmhal and esp8266 builds
by about 50 bytes.
2016-09-28 14:45:29 +10:00
eeb9d99333
docs/library/machine: Update description of disable/enable IRQ funcs.
2016-09-23 13:15:58 +10:00
4ab3eef8d7
docs/library/pyb.SPI: init(): Describe "bits" argument.
...
Based on https://github.com/micropython/micropython/pull/2210 .
2016-09-18 21:41:21 +03:00
a2391b5a74
Small WiPy doc fixes
2016-09-18 21:38:29 +03:00
3611dcc260
docs: Bump version to 1.8.4.
2016-09-09 14:07:09 +10:00
f3b5480be7
stmhal,cc3200,esp8266: Consistently use PWRON_RESET constant.
...
machine.POWER_ON is renamed to machine.PWRON_RESET to match other
reset-cause constants that all end in _RESET. The cc3200 port keeps a
legacy definition of POWER_ON for backwards compatibility.
2016-09-08 12:50:38 +10:00
dab0f316d2
docs/reference/isr_rules.rst: Two minor additions to docs for using ISR.
...
- Refers to the technique of instantiating an object for use in an ISR by
specifying it as a default argument.
- Footnote detailing the fact that interrupt handlers continue to be
executed at the REPL.
2016-09-07 17:12:42 +10:00
4a9542c0c0
docs/library/machine.WDT: Add that WDT is available on pyboard.
2016-09-06 14:20:52 +10:00
b4df3e74e1
docs/esp8266/quickref: Further improvements for SPI subsections.
...
Consistency and formatting.
2016-09-04 23:31:05 +03:00
20da9064d7
docs/esp8266/quickref: Update information on SPI classes.
...
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
76dcaddc0f
docs/esp8266/quickref: Add internal links to docs for some modules.
2016-08-29 17:40:36 +10:00
efc904c41d
docs/pyboard/quickref: Add section on "delay and timing" for utime mod.
...
And remove reference to deprecated pyb.delay() and pyb.millis().
2016-08-29 17:33:02 +10:00
5c3a2f162e
docs/pyboard/quickref: Add links to pinouts for other pyboard variants.
2016-08-29 17:32:38 +10:00
0f8b1ba8a2
docs/library: Add reference for pyb.usb_mode and pyb.USB_HID.
2016-08-29 15:17:20 +10:00
f2da6467a9
docs/pyboard: Update USB mouse tutorial to use pyb.USB_HID().
2016-08-29 15:16:51 +10:00
57c92d90b0
docs/pyboard: Update USB mouse tutorial to use VCP instead of CDC.
2016-08-29 15:15:25 +10:00
13c5a228c9
docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver.
2016-08-29 12:52:50 +10:00
ed0a06a93f
docs/esp8266/quickref: Fix and update the SPI docs
...
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
8e7dfea803
esp8266/modpybhspi: Add a HSPI module for hardware SPI support
...
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
64c5a9435c
docs/library/machine.WDT: Add note that WDT is only available on WiPy.
2016-08-17 14:22:39 +10:00
Andrew Mulholland
Lorenz Schmid
Peter Hinch
Damien George
Paul Sokolovsky
puuu
daniel
Alex March
Philip Potter
Radomir Dopieralski
juhasch