b67eb20ed0
stmhal: Fix I2C mappings for STM32F429DISC board.
2016-08-04 22:51:53 +10:00
460bceca39
stmhal: Make SPI NSS pin definition optional.
...
Some boards (like the GHI Electronics G30 Dev Board) don't use
NSS at all and rather just use GPIO chip selects.
2016-07-30 22:08:20 +03:00
afd4909a0f
stmhal: fixing malloc when used with external libraries
2016-07-30 21:24:35 +03:00
f3636a7b46
stmhal: Enable SD card on L4 MCUs.
2016-06-29 14:29:01 +01:00
b03df60f32
stmhal: Correct DMA to allow SD card on L4 MCUs.
2016-06-29 14:28:49 +01:00
14b7c3e59c
stmhal: Update HALCOMMITS due to change to hal
2016-06-29 14:28:49 +01:00
daa279a3a1
stmhal: Port of f4 hal commit 1d7fb82 to l4 hal
2016-06-29 14:27:55 +01:00
07209f8592
all: Rename mp_obj_type_t::stream_p to protocol.
...
It's now used for more than just stream protocol (e.g. pin protocol), so
don't use false names.
2016-06-18 18:44:57 +03:00
c8332a5463
stmhal: Add board definition files for Olimex STM32-E407.
2016-06-06 10:21:02 +01:00
1191ec6a14
stmhal/uart.c: Fix wrong baudrate calculation for stm32l4 series.
2016-06-03 14:24:59 +01:00
641300dccb
stmhal/dac: DAC deinit() method added.
2016-05-31 13:10:35 +03:00
2503b59592
stmhal/moduos: getcwd(): Use mp_obj_new_exception_arg1().
...
Argument types were converted, but old function call of
mp_obj_new_exception_msg_varg() remained.
2016-05-29 20:04:32 +03:00
4b37e775ea
extmod/machine_i2c: Redo mp_hal_pin macros to use open_drain and od_low.
...
mp_hal_pin_config_od is renamed mp_hal_pin_open_drain, and mp_hal_pin_low
is mp_hal_pin_od_low.
2016-05-26 17:06:40 +01:00
3e03d1b87e
stmhal: Support frozen packages using .mpy files.
...
See issue #1814 .
2016-05-23 13:29:56 +01:00
87981fc517
stmhal/sdcard: Allow to do unaligned read-from/write-to SD card.
...
For example, the following code now works with a file on the SD card:
f = open('test', 'rb') # test must be 1024 bytes or more in size
f.seek(511)
f.read(513)
Also works for writing.
Fixes issue #1863 .
2016-05-13 14:45:40 +01:00
1e388079f9
stmhal/i2c: Expose I2CHandle3 for use by custom C code.
...
If custom C code uses the I2C busses then it needs access to these
structures for i2c_init().
2016-05-13 11:23:32 +01:00
1dc2862a83
stmhal/led: Allow LEDs to be in PWM mode with TIM1 and channels 1-4.
...
This allows PYBv3 to use PWM for LED(1) and LED(2).
2016-05-13 11:01:21 +01:00
79a38a7a43
stmhal: For network drivers, convert to use MP_Exxx errno symbols.
2016-05-10 23:45:33 +01:00
5ab98d5c41
stmhal: Convert to use internal errno symbols; enable uerrno module.
2016-05-10 23:30:39 +01:00
b924f649cd
stmhal: Fix clock configuration for STM32L476-discovery; also add I2C2.
2016-05-10 09:20:30 +01:00
c4587e2426
stmhal/can: Allow to get existing CAN obj if constructed without args.
...
Initialisation of CAN objects should now behave as other peripheral
objects.
Fixes issue #2001 .
2016-05-08 12:47:33 +01:00
88153dc56a
stmhal/sdcard: Fix initialisation of DMA TX so that writes work.
...
Addresses issue #2034 .
2016-05-06 10:53:25 +01:00
cbbeb786d7
stmhal/dma: Fix builds for boards with an F4 or F7 but no DAC.
2016-05-06 09:57:33 +01:00
08d3d5d9ab
stmhal: For LIMIFROG board, add early-init function to get to DFU mode.
2016-05-05 17:00:30 +01:00
770f169e63
stmhal: Add board files for LIMIFROG board.
2016-05-05 17:00:16 +01:00
05d1664981
stmhal/dma: Make DAC DMA descriptors conditional on having a DAC.
2016-05-05 15:34:01 +01:00
0f846e563c
stmhal: L4: Add support for machine.sleep on STM32L4 MCUs.
...
Also raise an exception for machine.freq and machine.deepsleep on this
MCU, since they are not yet implemented.
2016-05-05 15:28:55 +01:00
7441ba7749
stmhal: L4: Make CCM/DTCM RAM start-up conditional on MCU type.
2016-05-05 15:19:33 +01:00
adaaf439b0
stmhal: L4: Adapt startup code, clock configuration and interrupts.
2016-05-05 15:14:42 +01:00
e64032d6fd
stmhal: L4: Adapt DMA to be able to support STM32L4 MCU series.
...
The main thing is to change the DMA code in a way that the structure
DMA_Stream_TypeDef (which is similar to DMA_Channel_TypeDef on stm32l4)
is no longer used outside of dma.c, as this structure only exists for the
F4 series. Therefore I introduced a new structure (dma_descr_t) which
handles all DMA specific stuff for configuration. Further the periphery
(spi, i2c, sdcard, dac) does not need to know the internals of the dma.
2016-05-05 14:51:20 +01:00
70ff7350e7
stmhal, cc3200: Change i2c.scan() method to scan addresses 0x08-0x77.
...
A standard I2C address is 7 bits but addresses 0b0000xxx and 0b1111xxx
are reserved. The scan() method is changed to reflect this, along with
the docs.
2016-05-02 11:15:36 +01:00
12c61ddddd
stmhal/accel: Raise an exception if the accel couldn't be initialised.
...
On PYBLITEv1.0 there is no accelerometer and in this case the Accel()
constructor should not silently succeed.
2016-04-29 15:43:15 +01:00
a63542387d
extmod, stmhal: Fix typo of macro that detects if float is enabled.
2016-04-26 12:47:24 +01:00
104aa26271
cc3200, stmhal, teensy: Use pyhelp_print_obj function.
...
Update the help() implementations in the cc3200, stmhal and teensy
ports to use the pyhelp_print_obj function.
2016-04-25 18:54:59 +03:00
624738ca64
extmod/machine_i2c: Allow mp_hal_pin_obj_t to be any type, not a ptr.
2016-04-22 09:56:02 +01:00
495da15611
stmhal: L4: Add support for external interrupts/events.
...
The L4 MCU supports 40 Events/IRQs lines of the type configurable and
direct. But this L4 port only supports configurable line types which are
already supported by uPy. For details see page 330 of RM0351, Rev 1.
The USB_FS_WAKUP event is a direct type and there is no support for it.
2016-04-21 13:11:37 +01:00
067fb2da14
stmhal: L4: Modify flash.c and storage.c to support L4 MCU.
...
The way to lookup the flash sector now uses a much simpler table for
all MCUs.
2016-04-21 13:03:38 +01:00
dda1a41205
stmhal: L4: Modify mphalport to support L4 MCU.
...
__GPIOI_CLK_ENABLE is defined in hal/l4/inc/Legacy/stm32_hal_legacy.h
as __HAL_RCC_GPIOI_CLK_ENABLE, and that latter macro is not defined
anywhere else (because the L4 does not have port GPIOI). So the test
for GPIOI is needed, along with the test for the CLK_ENABLE macro.
2016-04-21 12:23:28 +01:00
098f3e2862
stmhal: Update Makefile dependencies.
2016-04-19 11:54:07 +03:00
5e247a5192
stmhal: Fix machine.unique_id() function to work for all MCUs.
2016-04-17 12:18:50 +01:00
31f5dc065a
stmhal: L4: Modify timer.c to support L4 MCU.
2016-04-17 12:16:13 +01:00
432465b167
stmhal: L4: Modify rtc.c to support L4 MCU.
2016-04-17 12:08:07 +01:00
aed1da913b
stmhal: L4: Modify usbd_conf.c to support L4 MCU.
...
Original patch was authored by Tobias Badertscher / @tobbad, but it was
reworked to split UART edits from USB edits.
2016-04-17 12:02:26 +01:00
53521152a8
stmhal: L4: Modify uart.c to support L4 MCU.
...
L4 does not have UART6, and has similar registers to the F7.
Original patch was authored by Tobias Badertscher / @tobbad, but it was
reworked to split UART edits from USB edits.
2016-04-17 12:01:05 +01:00
d49a547064
stmhal: L4: Modify adc.c to add support for STM32L4 series.
2016-04-16 23:02:36 +01:00
69f26c68c9
stmhal: L4: Add line to Makefile for building L4 series.
2016-04-16 22:14:12 +01:00
0b6e28c999
stmhal: L4: Add board definition files for STM32L476DISC.
2016-04-16 22:11:02 +01:00
e943a407f2
stmhal: Update HALCOMMITS due to change to hal.
2016-04-16 22:00:49 +01:00
d4c3349957
stmhal: L4: Adapt UART HAL to avoid 64-bit integer division.
...
64-bit integer division brings a dependency on library functions. It is
avoided here by dividing fck and baud by a common divisior. The error
is the better (1/(2*0x300)) as with 64 bit division (1/(0x300)).
2016-04-16 21:54:19 +01:00
f4942db044
stmhal: L4: Add basic STM32L4xx HAL files.
...
These files come from STM32Cube_FW_L4_V1.3.0, with Windows line endings
converted to unix. Only basic HAL files are added. In addition the QSPI
support is included to support later external QSPI flash as mass storage.
2016-04-16 21:51:40 +01:00
David Siorpaes
Dave Hylands
Matt Brejza
dpslwk
Paul Sokolovsky
Stefan Hölzl
Tobias Badertscher
Peter Hinch
Damien George
Henrik Sölver
Tobias Badertscher
Colin Hogben