cb84e22ac6
docs/library/pyb.rst: Update pyb.usb_mode() to mention VCP+MSC+HID.
2019-09-11 15:17:38 +10:00
50636e5296
docs/library/pyb.rst: Update docs for pyb.usb_mode() function.
2019-09-10 13:22:35 +10:00
927a5d1dfd
docs/library/pyb: Add deprecation warning for mount and old block proto.
...
pyb.mount(None, mountpoint) functionality is also removed and replaced by
uos.umount.
2018-09-20 16:31:36 +10:00
805fd0cfe6
docs/library: Remove "only" directive from all pyb module docs.
...
By virtue of its name, the pyb module would only be available on a pyboard
and so does not need to have conditional "only" directives throughout its
documentation.
These conditionals were added mostly in
cfcf47c0644542643025
2018-07-18 15:47:44 +10:00
e708e87139
docs/library/pyb.rst: Add note about availability of USB MSC-only mode.
2018-02-01 15:52:49 +11:00
c9a48eb464
docs,teensy: Use the name MicroPython consistently in documentation
2017-07-15 11:44:32 +02:00
fbd252b77c
docs/{esp,pyb,ubinascii}: Use markup adhering to the latest docs conventions.
2017-06-27 00:38:05 +03:00
27c149efe0
stmhal: Add pyb.fault_debug() function, to control hard-fault behaviour.
...
This new function controls what happens on a hard-fault:
- debugging disabled: board will do a reset
- debugging enabled: board will print registers and stack and flash LEDs
The default is disabled, ie to do a reset. This is different to previous
behaviour which flashed the LEDs and waited indefinitely.
2017-02-06 13:22:17 +11:00
0f8b1ba8a2
docs/library: Add reference for pyb.usb_mode and pyb.USB_HID.
2016-08-29 15:17:20 +10:00
ce166e6b68
docs: Spelling mistakes
2016-08-02 11:17:46 +03:00
c13b2f2d00
docs: Several minor changes: network, pyb, ADCAll and inline asm.
2016-01-13 21:53:26 +00:00
4542643025
docs: Update all WiPy docs to reflect the new API.
2015-10-17 23:29:04 +02:00
845b5a2a58
docs: Describe properly how MCU can be woken from pyb.standby() state.
2015-10-10 00:03:14 +01:00
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
cfcf47c064
docs: Add initial draft documentation for the WiPy.
...
This makes all common files "port-aware" using the .. only directive.
2015-06-10 23:37:56 +02:00
dea853d3a3
docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup.
2015-04-21 22:35:17 +01:00
e97dddcdca
docs: Document pyb.main function to set main script.
2015-04-09 10:08:25 +01:00
d39c7aa517
stmhal: Add Python-configurable USB HID mode.
...
Different HID modes can be configured in Python. You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
3990dcfcd7
docs: Add note about maximum frequency of busses.
2015-01-08 22:54:26 +00:00
ddbcc79550
docs: Add quickref info about Servo; improve Servo docs.
2015-01-01 18:00:45 +00:00
7690b13953
stmhal: Add ability to mount custom block device.
2014-12-27 20:20:51 +00:00
008251180d
stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
...
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00
38bd762121
stmhal: Improve pyb.freq to allow 8 and 16MHz (not usable with USB).
...
Also restrict higher frequencies to have a VCO_OUT frequency below
432MHz, as specified in the datasheet.
Docs improved to list allowed frequencies, and explain about USB
stability.
2014-11-02 15:10:15 +00:00
a58713a899
docs: Cleanup and update some docs.
2014-10-31 22:21:37 +00:00
88d3054ac0
docs: Import documentation from source-code inline comments.
...
The inline docs (prefixed with /// in .c files) have been converted to
RST format and put in the docs subdirectory.
2014-10-31 01:37:19 +00:00
Damien George
Peter Hinch
Alexander Steffen
Paul Sokolovsky
Philip Potter
Mike Causer
danicampora