a9e6f08adb
zephyr/Makefile: Add "test" target, runs testsuite in QEMU.
2017-04-05 00:46:00 +03:00
58168c8e6b
zephyr/zephyr_getchar: Explicitly yield to other threads on char availability.
...
Without this, if there's a large chunk of data coming from hardware (e.g.
clipboard paste, or fed programmatically from the other side of the console),
there's a behavior of initial mass fill-in of the buffer without any
consumption, which starts much later and doesn't catch up with further
filling, leading to buffer overflow.
2017-04-04 17:14:53 +03:00
2908c3ca41
zephyr/modusocket: Factor out socket_new() function.
...
It will be reused e.g. for accept() implementation.
2017-04-04 06:28:14 +03:00
6e99a8c94e
zephyr/modusocket: Be sure to use MP_OBJ_FROM_PTR.
2017-04-04 06:21:09 +03:00
4c392243ae
zephyr/prj_base.conf: Add config for net_buf logging.
...
Disabled by default.
2017-04-03 12:07:56 +03:00
ca81c3ab0b
zephyr/modusocket: Implement recv() for TCP sockets.
...
Short read approach is taken - at most, the remaining data in the current
fragment will be returned.
2017-04-02 16:27:09 +03:00
3df65e9bae
zephyr/modusocket: Implement recv() for UDP sockets.
...
The foundation of recv() support is per-socket queue of incoming packets,
implemented using Zephyr FIFO object. This patch implements just recv()
for UDP, because TCP recv() requires much more fine-grained control of
network fragments and handling other issues, like EOF condition, etc.
2017-04-01 09:20:17 +03:00
4c307bfba1
all: Move BYTES_PER_WORD definition from ports to py/mpconfig.h
...
It can still be overwritten by a port in mpconfigport.h but for almost
all cases one can use the provided default.
2017-04-01 11:39:38 +11:00
64d00511e1
zephyr/modusocket: Implement send().
2017-03-31 23:14:39 +03:00
88582e33cc
zephyr/modusocket: Implement bind() and connect().
2017-03-31 23:02:41 +03:00
6cc1a7a214
zephyr: Integrate modusocket into build.
2017-03-31 00:06:31 +03:00
d1015f0e0d
zephyr/modusocket: Initial version of usocket module for Zephyr.
...
So far, socket creation and closure is implemented.
2017-03-31 00:04:31 +03:00
344bfbb71c
zephyr: Fix NLR segfault in minimal build.
...
Requires inclusion of zephyr.h to properly detect that we're building for
Zephyr.
2017-03-30 22:17:18 +03:00
df48f4645d
zephyr/Makefile: Add workaround (fix?) for broken builds for DTS targets.
2017-03-30 15:16:55 +03:00
29dd92c82a
zephyr/Makefile: Rework to use modern, official build integration.
...
Build happens in 3 stages:
1. Zephyr config header and make vars are generated from prj.conf.
2. libmicropython is built using them.
3. Zephyr is built and final link happens.
2017-03-30 00:08:27 +03:00
e93c4ca181
zephyr/prj_base.conf: Enable TCP (and UDP explicitly).
2017-03-29 00:46:06 +03:00
dbb2aea428
zephyr/prj_base.conf: Disable legacy kernel compatibility.
...
This keeps dependency on mdef, sysgen and other stuff which complicates
build integration.
2017-03-27 17:06:30 +03:00
220df8544b
zephyr/zephyr_getchar: Use native k_sem instead of legacy nano_sem.
2017-03-27 00:41:58 +03:00
99866a00a0
py/nlrx86: Better check for Zephyr (requires 1.7).
2017-03-26 00:33:23 +03:00
180045bce9
zephyr/main: Move lexer constructor to within NLR handler block.
...
And raise an exception when mp_lexer_new_from_file is called.
2017-03-14 11:52:05 +11:00
9c9674a325
zephyr/main: Remove unused __fatal_error().
2017-03-14 00:19:35 +03:00
f5aac7d33f
zephyr/main: nlr_jump_fail: Fix noreturn warning.
2017-03-13 00:43:36 +03:00
40e541063f
zephyr: Move "minimal" configuration building to a separate wrapper script.
...
Minimal config can be now build with:
./make-minimal BOARD=...
This is required because of Makefile.exports magic, which in its turn depends
on PROJ_CONF to be set correctly at the beginning of Makefile parsing at all
times. Instead of adding more and more workarounds for that, it's better to
just move minimal support to a separate wrapper.
Also, remove Zephyr 1.5 era cruft from Makefile, and add support for Zephyr's
"run" target which supercedes older "qemu" target in upstream.
2017-03-12 23:54:12 +03:00
736a8a8ac7
zephyr: Make sure that generated prj.conf is updated only on content changes.
...
This is a typical problem with make: we want to trigger rebuilds only
if file actually changed, not if its timestamp changed. In this case,
it's aggravated by the fact that prj.conf depends on the value of
BOARD variable, so we need to do some tricks anyway. We still don't
try to detect if just BOARD changed, just try to generate new
prj.conf.tmp every time (quick), but do actual replacement of prj.conf
only if its content changed.
2017-03-12 22:28:45 +03:00
e8d4527996
zephyr/modzephyr: Fix typo in identifier.
2017-03-09 10:18:21 +01:00
a64a0276b3
zephyr/modzephyr: Add a module for Zephyr-specific things.
...
Mostly intended to ease experimentation, no particular plans for APIs
so far (far less their stability), is_preempt_thread() provided is
mostly an example.
2017-03-08 08:55:50 +01:00
3d739eb398
zephyr/README: Network startup issues with frdm_k64f resolved.
...
But leave a generic warning that users should be aware of Zephyr's
limitations/issues for a board they use.
2017-02-17 22:08:42 +03:00
453f98914e
zephyr/main: Don't unconditionally dump stats on each GC.
...
This was a debug output for initial porting, breaks tests.
2017-02-14 23:31:47 +03:00
ce2703599f
zephyr: Add qemu_cortex_m3 config fragment.
...
Should work for QEMU networking with soon-to-merged upstream patch.
2017-02-14 17:01:26 +03:00
64916436b2
zephyr: Enable IPv6 networking in addition to IPv4.
2017-02-14 16:23:54 +03:00
00bd145398
zephyr/README: Describe many gotchas of networked builds.
2017-02-01 21:28:11 +03:00
d335904666
zephyr/Makefile.zephyr: Support and default to networked (SLIP) QEMU.
...
Also works for non-networked builds (like minimal).
2017-01-30 21:27:29 +03:00
300ecac336
zephyr/prj_frdm_k64f.conf: Add, enable Ethernet support.
2017-01-27 23:48:42 +03:00
1df1642b70
zephyr: Allow to have per-board Zephyr config fragments.
...
To enable options which may be incompatible with other boards, etc.
2017-01-27 23:42:11 +03:00
40e72e4a5c
zephyr: Make sure that correct Zephyr config is used for "minimal" build.
...
Overriding CONF_FILE in "minimal" target itself is too late due to include-
pinned $(Z_EXPORTS) target.
2017-01-27 21:43:13 +03:00
77e0cee49e
zephyr: Convert to use builtin help function.
2017-01-22 11:56:16 +11:00
5298472fee
zephyr: Enable SLIP networking for the default build.
...
This makes MicroPython app running in QEMU be pingable from the host (by
following QEMU networking setup instructions,
https://www.zephyrproject.org/doc/samples/net/qemu_setup.html ).
2017-01-21 17:16:35 +03:00
1459f81429
zephyr: Add separate Zephyr config for "minimal" build.
...
In anticipation of enabling more features in the default build. Also, fix
compilation of minimal build.
2017-01-21 16:13:32 +03:00
f1f2a3cebf
zephyr: Remove deprecated .mdef file.
2017-01-21 00:26:03 +03:00
58722103e1
zephyr/help: Update n_args param type to size_t.
2017-01-20 23:58:42 +03:00
bbd0d27a25
zephyr: Enable slice subscription.
...
Required for the testsuite.
2016-12-18 21:52:52 +03:00
56a514c193
zephyr/uart_core: Access console UART directly instead of printk() hack.
...
This is required to avoid extra level of output "cooking" ("\r\r\n") and
make test infrastructure work. On the other hand, this breaks somewhat
Zephyr console abstraction.
2016-12-17 00:48:56 +03:00
0c59c30fde
zephyr: Use core-provided keyboard exception object.
2016-12-16 01:07:28 +03:00
724b82559d
zephyr/main: Initialize sys.path and sys.argv.
2016-12-16 00:33:33 +03:00
c16e7eae5e
zephyr: Implement soft reset feature.
2016-12-15 01:10:08 +03:00
95fe7a40b3
zephyr: Support raw REPL.
2016-12-15 00:58:08 +03:00
1779a62085
zephyr: Switch to Zephyr 1.6 unified kernel API.
...
In 1.6, Zephyr switched to "unified kernel" and new API set. Older kernel
API is supported, but marked as deprecated and leads to warnings.
2016-12-04 00:47:20 +03:00
295266178c
zephyr/zephyr_getchar: Update to Zephyr 1.6 unified kernel API.
2016-11-30 01:42:58 +03:00
a6de451a13
zephyr: Add .gitignore to ignore Zephyr's "outdir" directory.
...
That's where Zephyr keeps object files and produced executables.
2016-11-30 00:26:31 +03:00
2bf96612d2
zephyr/mphalport.h: Update for new "unified" kernal API (sleep functions).
2016-11-09 00:11:30 +03:00
Paul Sokolovsky
Damien George