10f7ef0832
cc3200: Keep WLAN enabled during suspend mode.
2015-03-12 16:22:16 +01:00
6ae9383f63
cc3200: Remove WLAN.getmode since it's superseded by WLAN.ifconfig.
2015-03-12 16:22:13 +01:00
37337427c3
cc3200: Trigger a new network scan when WLAN.scan() is called.
2015-03-12 16:22:12 +01:00
b761ed2103
cc3200: Register ADC and I2C with the sleep module.
2015-03-11 22:09:52 +01:00
e9786f40f5
cc3200: Disable WLAN in suspended mode if NW wake is not enabled.
2015-03-11 17:11:10 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
73aee8da54
cc3200: Merge ExtInt class into Pin class.
...
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
26cbc91373
cc3200: Place functions only used while booting in a special section.
...
Such functions are never used after MicroPython has started, and they
remain in RAM wasting space. Now they are placed in a special section
named "boot" which sits just before the heap, allowing us to extend
the effective heap area up to the new boot section. Right now, this
gives us back ~1K, but in the future, more functions might end up in
there as well.
2015-03-11 16:59:29 +01:00
d226dd2f59
cc3200: Add preliminary low power deep sleep support.
2015-03-11 16:54:09 +01:00
0475de1350
cc3200: Make WDT and HeartBeat constant objects on their own right.
2015-03-11 16:54:05 +01:00
d01060241a
cc3200: Add heartbeat signal on system led.
2015-02-28 19:03:21 +01:00
74589cbeeb
cc3200: Move code that disables/enables servers to wlan_sl_enable().
2015-02-26 11:19:15 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
11aa6ba456
cc3200: Add WDT functionality as part of the pyb module.
...
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
2015-02-25 11:37:29 +01:00
70b3160871
cc3200: Introduce MICROPY_PORT_HAS_TELNET and MICROPY_PORT_HAS_FTP.
...
These definitions help on making modwlan.c usable by other ports
with the CC3100.
2015-02-23 15:02:57 +01:00
379a3fa305
cc3200: Change UART.print() to make it consistent with the rest.
2015-02-23 15:02:55 +01:00
88b7f52ebb
cc3200: Replace WLAN.get_ip() with WLAN.ifconfig().
...
Also change other methods' names to make them consistent.
2015-02-23 15:02:55 +01:00
44bb616b53
cc3200: Add simplelink non-os task calls.
2015-02-22 18:59:50 +01:00
4bfc491753
cc3200: Add wlan_urn() thanks to Nadim El-Fata and Bryan Morrissey.
2015-02-22 18:43:01 +01:00
33ddb566a7
cc3200: Remove dependencies from FreeRTOS.
...
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
92ea99a0fb
cc3200: Add support for connecting to WEP secured networks.
2015-02-21 22:27:54 +01:00
18605b36dc
cc3200: Rename SD.config() to SD.config_pins().
2015-02-21 22:27:48 +01:00
7102e51506
cc3200: Add UART __del__ method.
2015-02-21 22:27:44 +01:00
a7208bcc43
cc3200: Remove sd paths from sys path when disabling the sd card.
2015-02-21 22:27:39 +01:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
59d14914cd
cc3200: Correct pybsd_config() params retrieval.
2015-02-21 14:26:38 +01:00
c020109cfa
cc3200: Add SD module and disable SD card support for the LAUNCHXL.
2015-02-21 14:19:40 +01:00
6b21c3fdd6
cc3200: Refactor UART and I2C object creation.
...
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
7807da20ab
cc3200: Increase UART default read buffer size to 128 bytes.
2015-02-20 16:41:49 +01:00
868fa82ea4
cc3200: Add ADC module.
2015-02-20 16:40:59 +01:00
2b899b6708
cc3200: Remove asserts from sl_Stop() and reduce timeout to 250ms.
2015-02-20 16:40:15 +01:00
6ff9a47255
cc3200: Move `closed` field in mod_network_socket_obj_t out of the union.
2015-02-20 16:40:10 +01:00
e1dfc44178
cc3200: Disable FreeRTOS asserts. Optimize more files if BTYPE=debug.
2015-02-20 16:40:06 +01:00
99f3f6b5de
cc3200: Add I2C module. Only master mode is currently supported.
2015-02-13 17:54:04 +01:00
0b32e50365
stmhal: Make pybstdio usable by other ports, and use it.
...
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
53716fcc3e
cc3200: Rename GPIO module to Pin.
...
This change helps making the cc3200 port API a bit closer to stmhal.
The ramaining differences are due to the specific hardware details
of each chip. One feature that has been deliberately disabled is the
possibility to add custom names and custom pin mappings. Those
features are nice and convenient, but in this port, code size is a
major concern.
2015-02-09 20:01:54 +01:00
8785645a95
cc3200: Add cc3200 port of MicroPython.
...
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00
danicampora
Damien George