Commit Graph

406 Commits

Author SHA1 Message Date
Damien George 266e4acdc2 docs/library/machine.SPI: Remove spurious "of". 2016-10-24 14:41:21 +11:00
Damien George f12047f66d docs/machine.SPI: Improve descriptions of xfer methods.
In particular remove the "*" because not all ports support keyword
arguments.
2016-10-18 10:14:26 +11:00
Paul Sokolovsky a0b2f48c2f docs/machine.SPI: Bring up to date with Hardware API, make vendor-neutral. 2016-10-17 18:05:16 +03:00
Damien George c8d31585a0 docs: Bump version to 1.8.5. 2016-10-17 15:32:43 +11:00
Peter Hinch 9e1dec1818 docs/reference: Add constrained.rst doc.
It contains detailed information about writing scripts to run efficiently
on microcontrollers (and other constrained systems).
2016-10-11 15:27:20 +11:00
daniel a181340ad8 docs/wipy: Correct deep sleep current figure. 2016-10-10 14:22:39 +02:00
Alex March 00c1fc6d77 docs/uos: Add uos.statvfs() documentation. 2016-10-07 13:16:54 +11:00
Philip Potter eb239b8398 stmhal/usb: Add support to receive USB HID messages from host. 2016-10-04 15:38:01 +11:00
Radomir Dopieralski 219245e10f extmod/machine_i2c: Add support for the addrsize parameter in mem xfers.
The memory read/write I2C functions now take an optional keyword-only
parameter that specifies the number of bits in the memory address.
Only mem-addrs that are a multiple of 8-bits are supported (otherwise
the behaviour is undefined).

Due to the integer type used for the address, for values larger than 32
bits, only 32 bits of address will be sent, and the rest will be padded
with 0s. Right now no exception is raised when that happens. For values
smaller than 8, no address is sent. Also no exception then.

Tested with a VL6180 sensor, which has 16-bit register addresses.

Due to code refactoring, this patch reduces stmhal and esp8266 builds
by about 50 bytes.
2016-09-28 14:45:29 +10:00
Damien George eeb9d99333 docs/library/machine: Update description of disable/enable IRQ funcs. 2016-09-23 13:15:58 +10:00
Paul Sokolovsky 4ab3eef8d7 docs/library/pyb.SPI: init(): Describe "bits" argument.
Based on https://github.com/micropython/micropython/pull/2210 .
2016-09-18 21:41:21 +03:00
juhasch a2391b5a74 Small WiPy doc fixes 2016-09-18 21:38:29 +03:00
Damien George 3611dcc260 docs: Bump version to 1.8.4. 2016-09-09 14:07:09 +10:00
Damien George f3b5480be7 stmhal,cc3200,esp8266: Consistently use PWRON_RESET constant.
machine.POWER_ON is renamed to machine.PWRON_RESET to match other
reset-cause constants that all end in _RESET.  The cc3200 port keeps a
legacy definition of POWER_ON for backwards compatibility.
2016-09-08 12:50:38 +10:00
Peter Hinch dab0f316d2 docs/reference/isr_rules.rst: Two minor additions to docs for using ISR.
- Refers to the technique of instantiating an object for use in an ISR by
  specifying it as a default argument.

- Footnote detailing the fact that interrupt handlers continue to be
  executed at the REPL.
2016-09-07 17:12:42 +10:00
Damien George 4a9542c0c0 docs/library/machine.WDT: Add that WDT is available on pyboard. 2016-09-06 14:20:52 +10:00
Paul Sokolovsky b4df3e74e1 docs/esp8266/quickref: Further improvements for SPI subsections.
Consistency and formatting.
2016-09-04 23:31:05 +03:00
Paul Sokolovsky 20da9064d7 docs/esp8266/quickref: Update information on SPI classes.
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
Damien George 76dcaddc0f docs/esp8266/quickref: Add internal links to docs for some modules. 2016-08-29 17:40:36 +10:00
Damien George efc904c41d docs/pyboard/quickref: Add section on "delay and timing" for utime mod.
And remove reference to deprecated pyb.delay() and pyb.millis().
2016-08-29 17:33:02 +10:00
Damien George 5c3a2f162e docs/pyboard/quickref: Add links to pinouts for other pyboard variants. 2016-08-29 17:32:38 +10:00
Philip Potter 0f8b1ba8a2 docs/library: Add reference for pyb.usb_mode and pyb.USB_HID. 2016-08-29 15:17:20 +10:00
Philip Potter f2da6467a9 docs/pyboard: Update USB mouse tutorial to use pyb.USB_HID(). 2016-08-29 15:16:51 +10:00
Philip Potter 57c92d90b0 docs/pyboard: Update USB mouse tutorial to use VCP instead of CDC. 2016-08-29 15:15:25 +10:00
Damien George 13c5a228c9 docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver. 2016-08-29 12:52:50 +10:00
Radomir Dopieralski ed0a06a93f docs/esp8266/quickref: Fix and update the SPI docs
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
Radomir Dopieralski 8e7dfea803 esp8266/modpybhspi: Add a HSPI module for hardware SPI support
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
Damien George 64c5a9435c docs/library/machine.WDT: Add note that WDT is only available on WiPy. 2016-08-17 14:22:39 +10:00
Paul Sokolovsky 5e01fb01b3 docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip.
It used a standard BootROM programming algo and may be useful as a
fallback.
2016-08-10 21:40:40 +03:00
Paul Sokolovsky 2146cdab5e docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode. 2016-08-09 21:13:27 +03:00
Damien George e4e4526954 docs: Bump version to 1.8.3. 2016-08-09 23:49:25 +10:00
Paul Sokolovsky 5c73de0337 docs/uio: Mention seek()/flush() support for io.BytesIO. 2016-08-09 01:52:56 +03:00
Paul Sokolovsky 3e5534caf7 docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics. 2016-08-07 22:41:34 +03:00
Paul Sokolovsky d2cab0b7be docs/esp8266/tutorial/intro: Add anchor for link from quickeref. 2016-08-07 22:16:40 +03:00
Paul Sokolovsky f84dda7111 docs/esp8266/quickref: Link to installation instructions. 2016-08-07 17:46:27 +03:00
Paul Sokolovsky a9923d190e docs/esp8266/intro: Add troubleshooting section.
Tries to summarize most of the issues we've seen so far.
2016-08-07 17:28:33 +03:00
Paul Sokolovsky 919c54f750 docs/esp8266/intro: Rename to "Getting started" from "Introduction".
People tend to skip introductions (everyone knows what esp8266 is, right?),
so try to do A/B testing with a title inviting to read it.
2016-08-07 17:28:23 +03:00
Paul Sokolovsky 1966745689 esp8266/tutorial/intro: Reword para abou -fm dio switch.
Not all NodeMCU boards require it.
2016-08-07 16:31:09 +03:00
Paul Sokolovsky fdb411a8c5 docs/library/index: Include array module in ToC. 2016-08-07 00:16:41 +03:00
Paul Sokolovsky 8a0b6f561c docs/array: Document array module. 2016-08-07 00:13:48 +03:00
Mike Causer ce166e6b68 docs: Spelling mistakes 2016-08-02 11:17:46 +03:00
Mike Causer b4564841b6 docs: Add DHT to ESP8266 Quick Ref and Tutorial 2016-08-01 14:39:57 +03:00
Damien George 1459a8d5c9 docs: Bump version to 1.8.2. 2016-07-10 12:46:50 +01:00
Martin Müller 047ac2044d docs/library: Fix typo in docs for usocket.listen(). 2016-06-26 12:38:20 +01:00
Paul Sokolovsky b2641b53e0 docs/conf.py: Exclude cmath from modindex for wipy. 2016-06-19 19:17:42 +03:00
Paul Sokolovsky 2b6dcdd3e4 docs/sys: print_exception: Fixes/clarifications. 2016-06-18 19:06:53 +03:00
Paul Sokolovsky 617e033e2f docs/select: Add an article. 2016-06-18 19:06:42 +03:00
Paul Sokolovsky 51805e4a3a docs: Rebuild docs from scratch, as required for proper only:: handling.
Docs are now by default rebuilt from scratch, as required to build
conditionalized (i.e. using only:: directive) docs across different
output types. We have pretty small docset, so that's still rather fast.
However, if that's a concern, incremental rebuilds can be used by
passing "FORCE=" (nothing after =) as a make parameter. This will work
when using the same output type (e.g. only "html").
2016-06-14 00:23:33 +03:00
Paul Sokolovsky 91031b60dc docs/conf.py: Active sphinx_selective_exclude extensions.
For modindex_exclude extension, per-port module excludes are also added.
With these changes, it's possible to generate docs for a particular port
devoid of any superfluous and unrelated content, including in indexes and
full-text search - with small caveat: when generating PDF docs after HTML,
or vice-versa cached internal doctree representation (build/*/doctrees/)
must be removed first.
2016-06-12 01:18:13 +03:00
Paul Sokolovsky f6d01b8b67 docs: Add sphinx_selective_exclude extension suite.
Designed specifically to workaround issues we were facing with generating
multiple conditionalized output docsets from a single master doctree.
Extensions were factored out into a separate project, based on the fact
that many other Sphinx users experience similar or related problems:
https://github.com/pfalcon/sphinx_selective_exclude

Corresponds to the 182f4a8da57 upstream revision.
2016-06-12 01:13:39 +03:00